GFCI Outlet Installation in Tampa Bay

Looking for GFCI outlet installation in Tampa Bay? Keywest Lights & Electric can help. Call Keywest Lights & Electric for help. We are a woman-owned company in Seminole, Florida. Our license number is EC13014717. We serve Pinellas and Tampa Bay areas.

Request a quote in Tampa Bay.

Tell us what you need and where you are. A licensed electrician will call or text you back to set a time. For an emergency, call (727) 476-7079, 24/7.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

We fix dead, loose, warm or sparking outlets and add new ones where you need them. Since 2010, we have served Seminole, Largo, St. Petersburg, Clearwater and greater Pinellas under license EC13014717. We handle even one-outlet jobs.

Request a quote

Call (727) 476-7079 or book an outlet repair. Office 7 AM–5 PM, weekend service, 24/7 emergency calls.

Electrician testing a wall outlet with a receptacle tester
Testing an outlet before and after the repair.

Outlet repair: what we fix

Outlets are the part of your electrical system you touch every day, so they’re also where problems show up first. We repair:

  • Dead outlets and outlets that work on and off.
  • Loose outlets where plugs fall out, which causes arcing and heat.
  • Warm, discolored or scorched outlets (turn off the breaker and call us; this is the kind of problem that starts fires).
  • Sparking outlets when you plug something in.
  • GFCI outlets that won’t reset or keep tripping, especially outdoors and in garages.
  • Whole rooms or strings of outlets that stopped working together (likely a tripped GFCI upstream or a failed connection in another box; our electrical troubleshooting guide covers what to check before you call).
  • Outlets damaged by water, salt air or a lightning surge.

We don’t just replace the outlet. A burned outlet may mean a loose connection, too much power on the circuit, or old aluminum wiring. We find the real problem first. Then we explain what we found. We tell you the cost before we fix it.

Is it an emergency? If an outlet smells like burning, is hot, is scorched, or sparks more than a tiny flash, turn off its breaker and call our 24/7 emergency line. If an outlet simply stopped working and nothing smells or feels hot, it can wait for a scheduled visit.

Outlet installation: what we add

  • New outlets where you need them: behind the TV, at the kitchen island, in the garage, on the lanai or patio.
  • USB-A and USB-C outlets for kitchens, bedrooms and home offices.
  • GFCI outlets in bathrooms, kitchens, garages, laundry areas, outdoors, and near pools and spas.
  • Weather-resistant outdoor outlets with in-use (bubble) covers, built for Florida rain and salt air.
  • Tamper-resistant outlets for homes with kids.
  • 240-volt outlets for dryers, ranges, welders, shop tools and plug-in EV chargers (NEMA 14-50). See EV charger installation. Hardwired water heaters, tankless units and cooktops are on our appliance & water heater hookup page.
  • Floor outlets and furniture-friendly outlets during remodels. See home remodel & addition electrical.

Two-prong to three-prong outlets, done right

Many Pinellas homes built before the 1960s, and plenty of St. Petersburg bungalows, still have two-prong outlets on ungrounded circuits. Swapping in a three-prong outlet without a ground is unsafe and not allowed. The right options are:

  1. Run a ground to the outlet, or.
  2. Install GFCI protection (at the outlet or the breaker) and label the outlets “No Equipment Ground,” as the code allows.

We’ll tell you which makes sense for your home and budget. If the house has a lot of ungrounded or knob-and-tube wiring, we’ll talk through rewiring options too.

GFCI and AFCI protection

  • GFCI (ground-fault) protection shuts off power in a fraction of a second if current leaks to ground. That’s what protects you from shock near water. In older homes we commonly add GFCI protection where it’s missing and replace worn or salt-damaged outdoor GFCIs.
  • AFCI (arc-fault) protection detects dangerous arcing in wiring, a common cause of electrical fires. It’s required on most living-area circuits in new work and is a smart upgrade when you replace a panel. See panel upgrades.
  • Dual-function breakers do both.
Boat dock post with a low-voltage transformer for the dock lights and weatherproof in-use covers, wired by Keywest Lights & Electric
Dock lighting power on a Pinellas County boat dock: we mounted a low-voltage transformer for the dock lights, rewired the post and fitted weatherproof in-use covers over the receptacles.

Dedicated circuits

Some appliances need their own circuit so they don’t trip breakers or overheat shared wiring: refrigerators, garage freezers, microwaves, dishwashers, disposals, mini-split and window AC units, water heaters, pool pumps, spa heaters, workshops and home offices. New circuits need a permit, and we pull it. Central air conditioners also get a dedicated 240-volt circuit. Our guide to AC disconnects, breakers and wiring covers the warning signs and what to check before a new unit goes in.

Outlet repair near you

We’re based at 6248 Seminole Blvd and do outlet repair and installation across Pinellas County:

  • Seminole: our home base. Older homes with tired outlets, outdoor GFCIs near Lake Seminole and Boca Ciega Bay, and lanai circuits.
  • Largo: single-family homes, condos, manufactured-home communities and rentals that need documented safety repairs.
  • St. Petersburg: the county’s oldest housing, with two-prong outlets, knob-and-tube and aluminum branch wiring.
  • Clearwater: salt-air corrosion on Clearwater Beach and Island Estates outlets, and older homes in Skycrest and Morningside.
  • Pinellas Park: block homes with worn outlets and ungrounded circuits, plus 240-volt and dedicated circuits for shops and warehouses.
  • Dunedin: worn and ungrounded outlets in older homes near downtown, salt-worn outdoor GFCIs near St. Joseph Sound, and dedicated circuits for Main Street kitchens.
  • Also Madeira Beach, Treasure Island, Gulfport and all our service areas. Need more than one job done? See outlets gfci afci dedicated circuits service for Pinellas County homes.

How an outlet repair visit works

  1. Call or book online. Tell us what’s happening; photos help.
  2. We diagnose the cause. Not just the outlet, but the circuit behind it.
  3. You approve the price before we start.
  4. We fix it, test it and clean up. Permitted when required.

Got a list? Bundle your small jobs (outlets, a ceiling fan, a new light fixture, smoke detectors) into one visit.

Warranty and plans

Outlet trouble? Call (727) 476-7079 to reach a licensed electrician.

GFCI vs. AFCI: what each one does

GFCI outlet with test and reset buttons on a tiled kitchen backsplash
GFCI outlet with test and reset buttons on a tiled kitchen backsplash (Keywest Lights & Electric job photo)

GFCI outlets turn off electricity if it leaks, keeping people safe from shocks in places like kitchens and bathrooms. AFCI devices find wiring problems that can cause fires and are needed in many new homes. We put both in where the rules say they must be and check them before we go. Call or text (727) 476-7079 for help with GFCI outlet installation in Tampa Bay.

We do outlet and circuit work at 6248 Seminole Blvd in Seminole. Our company is woman-owned, with license number EC13014717. We offer a two-year warranty, or five years for Member Care Plan members. Call (727) 476-7079 or request service online.

Why does my GFCI keep tripping? Moisture, a failing appliance or a worn GFCI are the usual causes. We test to find which.

Permanent eave lights need no outdoor outlet: the controller and its power supplies go in the garage, on existing outlets where possible. We add an outlet only if needed. See JellyFish permanent lighting for how these systems work.

Tamper-resistant, weather-resistant and USB outlets

Current code requires tamper-resistant outlets in most rooms, with shutters that stop kids from putting keys or hairpins into slots. Outside outlets in wet areas must have a weather-resistant rating and covers that stay closed when something is plugged in. This is important on Gulf-facing lanais where salt air can damage cheap covers. USB-C combination outlets are popular for nightstands, desks, and kitchen islands if the box is deep enough to fit the device.

  1. Kitchen countertop receptacles: GFCI protected and spaced so no spot on the counter is far from an outlet.
  2. Garage and laundry: GFCI protection, plus a dedicated circuit for a freezer or washer where needed.
  3. Lanai, pool and dock: weather-resistant devices, in-use covers and GFCI protection.

Replacing switches too? See dimmer and switch installation.

Start with everything we do for the basics.

GFCI outlet installation in Tampa Bay for failed receptacles and new dedicated circuits

Outlet repair in Tampa Bay means fixing a broken receptacle quickly. It also includes replacing a two-prong outlet properly. A new dedicated circuit may be needed too. GFCI and AFCI outlets are checked where we are, not from a list of parts.

Outlet repair & installation FAQ

Do I need tamper-resistant outlets? Current code requires them in most locations in new and replaced receptacles in a home. We install them as standard.

What kind of outdoor outlet cover do I need? In wet places, use an in-use (bubble) cover. It stays closed when a cord is plugged in. It should be on a weather-resistant, GFCI-protected receptacle.

Can you install USB-C outlets? Yes. Combination outlets fit most standard boxes. We check box depth first and swap the box if needed.

Why did my outlet stop working? The most common causes are a tripped GFCI somewhere else on the circuit (check the bathroom, kitchen, garage and outdoor GFCIs), a tripped breaker, or a loose or burned connection. Call us and we’ll trace it.

My GFCI keeps tripping. Is it bad? The device may be worn out, especially outdoors near salt air. It may be tripping because something on the circuit really is leaking current. We’ll find out which.

Can you install USB or USB-C outlets? Yes. They fit in a standard box and are a quick upgrade for kitchens, bedrooms and offices.

Do I need a permit to add an outlet or circuit? New circuits usually need a permit. Florida’s 2026 rule doesn’t exempt electrical work for small homes. We get permits when needed. Call or text (727) 476-7079 for help.

Can you add an outlet for a garage freezer? Yes. Garage outlets need GFCI protection, and a dedicated circuit is the best choice for a freezer.

How much does outlet repair cost? It depends on what’s causing the problem and how many outlets are involved. We diagnose first and give you the price before we start the work.

Outlet acting up? Call (727) 476-7079 or book online.

Related: 240V Outlet Installation · Grounding & Ungrounded Outlets · Residential Electrical Service · Ceiling Fan & Light Fixture Installation · 24/7 Emergency Electrician · Rewiring · Whole-House Surge Protection · Panel Upgrades · Appliance & Water Heater Hookups · Pool & Spa Electrical

Outlet &amp. Circuit pages: Seminole · Largo · St. Petersburg · Clearwater · Pinellas Park · Dunedin · All service areas →

County pages: Hillsborough County · Pasco County · Pinellas County.