Home Rewiring in Tampa Bay for Older Houses

Looking for rewiring in Tampa Bay? Keywest Lights & Electric can help. Pinellas and Tampa Bay jobs go to Keywest Lights & Electric, a woman-owned shop licensed EC13014717.

Request a quote.

Tell us what you need and where you are. A licensed electrician will call or text you back to set a time. For an emergency, call (727) 476-7079, 24/7.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Safe, permitted rewiring for older Tampa Bay homes, done with care for your walls and your budget.

Request a quote.

Census data puts the median home in St. Petersburg at 1969 and in Gulfport at 1963, and many neighborhoods are much older. Wiring from those eras wasn’t designed for modern loads, and some types carry real risks.

Call (727) 476-7079 for a wiring evaluation.

Wiring we fix.

  • Aluminum branch-circuit wiring (common in homes built roughly 1965–1973). Connections can loosen and overheat. Options include approved remediation connectors at each connection point (such as COPALUM or AlumiConn) or rewiring.
  • Knob-and-tube (pre-1950s). No ground, insulation that’s brittle with age. Citizens’ 4-point inspection form asks whether active knob-and-tube is present.
  • Cloth-insulated and early ungrounded wiring. Two-prong outlets, no equipment ground.
  • Unpermitted or non-professional additions. Buried splices, undersized wire, missing boxes.

Full or phased.

A full rewire can be done room by room. Working through attics. Crawl spaces and existing openings to keep wall repairs to a minimum. If the budget calls for it, we’ll prioritize the highest-risk circuits (kitchens, bathrooms, bedrooms) and phase the rest. Rewiring pairs well with a panel replacement and GFCI/AFCI protection.

Partial or whole-home rewiring?

Not every older house needs every wire replaced. A partial rewire fits when the problem is limited. An addition wired with the wrong cable, a few circuits of cloth wiring left over from an old remodel, or aluminum branch circuits in one part of the house.

A whole-home rewire makes sense when the original wiring runs through the entire house. When an insurer will not accept the wiring type at all, or when you are already opening walls for a remodel. We trace each circuit back to the panel during the estimate visit and mark which ones are original. Have been updated and which are a risk. That map is what decides the scope, and you see it before you decide.

Signs your home may need rewiring.

Light switch beside open drywall cuts at floor level for new wiring
Light switch beside open drywall cuts at floor level for new wiring (Keywest Lights & Electric job photo).

Warning signs include two-prong ungrounded outlets, cloth-insulated or aluminum branch wiring, outlets or switches that feel warm, frequent flicker or tripping, and insurance companies asking about the wiring. Homes built before the 1970s in Pinellas may have at least one of these. We inspect first and tell you whether you need a full rewire or a few targeted circuits.

We make small, neat access cuts. Rewire room by room so you keep power where possible. Pull the permit and pass inspection. See also knob-and-tube and cloth wiring replacement and panel upgrades. Licensed electrical contractor EC13014717, woman-owned and based at 6248 Seminole Blvd, Seminole. Workmanship carries a 2-year warranty, or 5 years for Member Care Plan members.

Signs older wiring may need replacing.

Common reasons to consider rewiring include cloth-insulated or ungrounded wiring. Knob-and-tube wiring. Aluminum branch circuits with signs of overheating at outlets or switches. Frequent breaker trips. Warm cover plates and outlets that no longer hold a plug.

Rewiring after a 4-point flag: if an insurer’s report lists cloth wiring. Knob and tube or aluminum branch wiring. Start with our 4-point inspection corrections page. We scope the rewire to what the report calls for.

House rewiring in Tampa Bay, FL: Rough-in outlet box with NM cable stapled along a wood stud
Rough-in outlet box with NM cable stapled along a wood stud.

Keep reading: electrical safety checkups.

Related: knob-and-tube replacement. panel upgrades. Older trouble-prone panels. outlets and GFCI/AFCI. aluminum wiring repair.

Guide: aluminum wiring in Pinellas homes: insurance, risks and repair options.

Living at home during a rewire.

Most families stay put. Before we start, we agree on a written room-by-room plan. Which circuits go dark each day, which rooms stay usable. Where we expect to open walls. We keep the kitchen. One bathroom and the bedrooms powered while other areas are worked. We make every opening safe before we leave for the day.

  1. We fish new copper through attic and wall cavities where we can, so most openings are small and placed at boxes and junctions.
  2. We patch the openings we make. Texture and paint are a separate step, and we tell you up front who handles them.
  3. Each phase gets its own inspection, so a large job can be spread over weeks if that suits your budget.

Rewiring for insurance and resale.

Florida 4-point inspections record the wiring type, and many carriers question single-strand aluminum branch wiring, cloth-insulated cable and active knob-and-tube. A permitted rewire with a final inspection gives your agent and a future buyer a clean record. If the report only flags aluminum connections. A connector repair may be an option instead. See our aluminum wiring guide.

Start with the full list of KWLE services for the basics.

Home rewiring in Tampa Bay for older houses, in phases or all at once.

Rewiring in Tampa Bay is planned as a full-house job or as a phased room-by-room project so the household can stay in place. Insurance and resale questions already noted here are answered from the wiring we actually find, not from the age of the house alone.

FAQ.

Can we stay in the house during a rewire? Yes, in most cases. We phase the work so key rooms keep power, restore power to finished areas at the end of each day. Give you a daily plan of which circuits will be off.

Will you have to tear open my walls? Not wholesale. We route wire through existing cavities where possible. And the openings we do make are small and patched. Paint and texture are a separate step.

Will rewiring help with homeowners insurance? It can. Citizens’ 4-point inspection form asks about cloth wiring, active knob-and-tube and aluminum branch circuits. Replacing or remediating them can clear those items. We provide documentation after the work. Your insurer makes the final call, so ask your agent what they need.

Is aluminum wiring dangerous? Single-strand aluminum branch wiring. Used in some homes in the 1960s and 1970s. Can loosen and overheat at connections. Approved repair methods exist. Such as connectors rated for aluminum-to-copper, or the circuits can be replaced.

Do I need to rewire the whole house at once? Not always. Rewiring can be done in phases. For example starting with the circuits in the worst condition or those in rooms being remodeled. Each phase needs a permit and inspection.

How do I know if I have aluminum wiring? Look at the cable jacket in the attic or at the panel for “AL” or “ALUMINUM,” or check the silver-colored conductors at the breakers. Don’t open outlets or the panel yourself. We’ll check it safely.

Worried about old wiring? Call (727) 476-7079.

Related: Panel Upgrades. Older trouble-prone panels. Residential Service. Knob & Tube Wiring Replacement. Aluminum Wiring Repair.

Ready to get started? Call (727) 476-7079 or request service online.

Areas we serve: Seminole. Largo. St. Petersburg. Clearwater. Pinellas Park. Madeira Beach. Treasure Island. Gulfport. Dunedin. Tampa. All service areas →.

By county: Rewiring in Pinellas County. Rewiring in Hillsborough County. Rewiring in Pasco County.

Call or text (727) 476-7079.