Who handles lighting installation in Tampa Bay? Keywest Lights & Electric does lighting installation in Tampa Bay as a woman-owned contractor under license EC13014717.
Request a quote
Tell us what you need and where you are. A licensed electrician will call or text you back to set a time. For an emergency, call (727) 476-7079, 24/7.
A licensed electrician installs recessed lights, fixtures, dimmers and security lights for homes and businesses in Pinellas County. We’re an electrical contractor based in Seminole, not a lighting store: you pick the look, and we do the wiring, mounting and switching.
Request a quote
Call (727) 476-7079 to plan your lighting

- Recessed, under-cabinet and indoor lighting: this page, below.
- Ceiling fans, chandeliers and light fixture swaps: ceiling fan and light fixture installation.
- Pool cage, soffit and security lighting: wired fixtures, flood lights and motion sensors.
- Permanent eave and Christmas lights: permanent lighting installation, featuring JellyFish Lighting (we’re an Authorized Dealer of JellyFish Lighting, not the company).
- Parking lots, wall packs and pole lights: parking lot and site lighting.
Indoor lighting
- Recessed (can) lighting installation: slim LED wafer lights for retrofits, laid out for even light without a “runway” look.
- Pendants over islands and dining tables, hung at the right height and on their own dimmer.
- Under-cabinet and kitchen task lighting.
- Ceiling fans and fixtures: properly supported fan-rated boxes.
- Dimmers and smart switches compatible with LED loads (no flicker or buzz).


Outdoor lighting on the house
Porch lights, coach lights by the doors and switch or timer changes for exterior fixtures are quick jobs we handle on any service call. Bigger outdoor projects need an on-site estimate. These include soffit downlights, pool cage and lanai lights, flood lights and motion sensors. For app-controlled color under the eaves, see permanent lighting.
Lighting installation in Tampa Bay, starting in Seminole and Pinellas
We’re based in Seminole, and most of our lighting work is for Pinellas County homes and businesses in Seminole, Largo, St. Petersburg, Clearwater, Pinellas Park and the Gulf beach towns. Many older homes here have one ceiling light per room. So the job we hear about most is adding recessed lights and dimmers to a room that never had enough light.
Near the water, we use fixtures and covers rated for wet and coastal locations, because salt air shortens the life of standard outdoor fixtures. In condos and HOA communities, we work with the association on exterior fixture rules and common-area wiring. When a job needs a permit, we pull the permit and handle the inspection.
Do your outdoor outlets trip when extra loads go on? Ask us about a dedicated outdoor circuit. Our outlets and dedicated circuits page explains the options.
Commercial lighting
LED retrofits, emergency lighting and exit signs, plus parking lot, site and wall-pack lighting. See commercial service.

Recent projects
- Recessed Lighting Renovation (Pinellas Park): Rooms lit by single bare fixtures during a renovation, finished with new recessed lighting across the ceilings. See the before & after →
- Commercial Lighting Remodel (St. Petersburg): Old flush-mount and fluorescent ceiling fixtures in a commercial facility replaced with new recessed lighting in the meeting room, kitchen and common areas. See the before & after →
How we plan a lighting project

We start with how you use the room: task light where you work, softer light where you relax, and dimmers so one room can do both. We check ceiling joists and insulation before placing recessed lights. We confirm fixtures are rated for damp or wet spots where needed. And we pick a color temperature that matches the rest of the home.
Lighting work comes from our woman-owned shop at 6248 Seminole Blvd, Seminole, under license EC13014717. Each fixture install is guaranteed two years (five for Member Care Plan members). Call or text (727) 476-7079 or request service online.
Can you add recessed lights without opening the whole ceiling? Yes in most cases, using remodel housings or slim LED wafers with small access cuts.
Do you install fixtures I bought myself? Yes, as long as they are listed for the location. We check that before installing.
Choosing lighting that works in Florida homes
LED fixtures use far less power than old bulbs and give off less heat. That matters in Florida’s cooling season. Color temperature affects how a room feels: about 2700K to 3000K reads warm, 4000K neutral and 5000K cool. Outdoor and lanai fixtures need damp or wet location ratings, and recessed fixtures in insulated ceilings must be IC rated.
Related: our recessed and pendant lighting guide and ceiling fans and fixtures.
Canless LED, IC ratings and dimmers
- Canless (wafer) LED downlights mount through a small hole with a slim junction box, so they suit ceilings with limited space above.
- IC-rated fixtures can touch insulation. In an insulated ceiling below an attic, use IC-rated fixtures.
- Damp and wet ratings matter outdoors: covered lanais and porches need damp-rated fixtures, and spots exposed to rain need wet-rated ones.
- Selectable color temperature fixtures let you pick a setting, such as 2700K to 5000K, with a switch on the fixture.
- Dimmers must be rated for LED loads and matched to the fixture, or you get flicker and buzzing.
Adding ceiling lights to a room? Our recessed lighting installation page covers layout, housings, dimmers and Florida attic details.
Hanging a fan where a light is now? See ceiling fan installation.
Need smooth dimming? See dimmer and switch installation.
For the full overview, see everything we do.
FAQ
What does IC-rated mean for recessed lights? IC-rated fixtures are designed for direct contact with insulation, so they are the right choice for insulated ceilings.
Can I choose the color temperature after the lights are installed? With selectable-CCT fixtures, yes. A small switch on each fixture sets the color, for example from 2700K to 5000K.
What color temperature should I choose? Warm white, around 2700K to 3000K, suits most living spaces. Neutral 3500K to 4000K is common in kitchens, garages and work areas.
Do outdoor lights need special ratings? Yes. Fixtures exposed to rain need a wet-location rating; covered porches and lanais need at least a damp-location rating.
Can you add recessed lights without tearing up my ceiling? In most single-story homes with attic access, yes. Retrofit LED wafers need only a small hole per light.
Why do my LED lights flicker? The likely cause is an incompatible dimmer or a loose connection. It can be a sign of a bigger wiring issue. We’ll diagnose it.
Do outdoor lights need a permit? New circuits and many outdoor lighting changes require an electrical permit. When yours does, we pull the permit and handle the inspection.
Do you install outdoor lighting on the house? Yes. We install pool cage, soffit, porch, flood and security lighting on the house.
Where do you install lighting? In Pinellas County, working from our Seminole base: Seminole, Largo, St. Petersburg, Clearwater, Pinellas Park, Dunedin, Palm Harbor and the beach towns, plus planned projects in nearby parts of Tampa Bay. We don’t take lighting jobs outside the Tampa Bay area.
Can you replace the single ceiling light in an older Pinellas home with recessed lights? Yes, in most cases. In most homes with attic access we add LED wafer lights on a new or existing switch leg, with a dimmer if you like, and patch only small holes. We check the circuit load and the existing wiring first.
Light it right. Call (727) 476-7079.
Related: Permanent Lighting · Outlets, GFCI & Dedicated Circuits.
Ready to get started? Call (727) 476-7079 or request service online.
Areas we serve: Seminole · Largo · St. Petersburg · Clearwater · Pinellas Park · Palm Harbor · Dunedin · Safety Harbor · Madeira Beach · Treasure Island · St. Pete Beach · Gulfport · Tampa · All service areas →
County pages: Hillsborough County · Pasco County · Pinellas County.
