Is your Holiday house from the 1970s, with the panel it was built with? Solar installation in Holiday starts from this: house from the 1970s with the panel it. Then the smartest solar plan starts inside that gray box. Keywest Lights & Electric (EC13014717) checks the panel and the wiring, fixes what needs fixing, plans a SPAN smart panel if it fits and connects the inverter. Our licensed partner installs the racking and modules.
Request a solar quote in Holiday
Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.
Other licensed work we already do here includes jellyfish lighting, and battery backup installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Solar installation in Holiday: An older town, by the numbers
The median home in Holiday was built in 1977. About 64 percent of homes were built before 1980. That is one of the older housing stocks in our service area. It also means many panels, breakers and wires here are near the end of their useful life, even if they still seem to work.
Solar puts new demands on a panel. Power flows both ways. The bus carries more current. Weak parts that were fine for forty years can start to fail once an inverter is tied in.
What we often find in 1970s houses
We are not trying to scare you. We are telling you what we check, and why the order matters.
- Panels that were common then but are no longer made, some with a poor safety record.
- Breakers that no longer trip the way they should.
- Two-prong outlets with no ground.
- Aluminum branch wiring, used in some homes of that era, which needs approved repair methods at each connection.
- Services sized for a smaller house, before central air and a pool were added.
Fix first, then go solar
We give you a written list with each item and its reason. You decide what to do and when.
| Finding | What we recommend | Why it comes before solar |
|---|---|---|
| Old or unsafe panel. | Replace it, often with SPAN. | The inverter needs a safe, rated place to land. |
| Small service | Upgrade the service. | More capacity for the array and new loads. |
| No ground at outlets. | Add grounding where needed. | Protects people and new electronics. |
| Aluminum branch wiring. | Repair with approved connectors. | Reduces heat at old connections. |
| No surge protection. | Add a whole-home surge device. | Guards the inverter and appliances. |
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
Why SPAN is a good fit for an upgrade
If the panel has to be replaced anyway, SPAN is worth a look. It is a new panel and a smart system in one. Every circuit shows up in an app. You can watch solar output next to the house’s use. Later, if you add a battery, SPAN picks which circuits stay on during an outage. Doing the panel once, the right way, saves a second visit later.
Low slopes, carports and add-ons
Many older Florida houses have a low-slope section over a porch or a carport added years after the main house. Those parts are often weaker or flatter than the main structure. The partner decides whether modules can go there or whether the main slopes are the better home. Our side follows that choice. We plan the shortest safe wire path, avoid running conduit across walkways and keep the disconnect where you can see it from the driveway.
Old work from past owners
Fifty years is a long time. Over that span, many Holiday homes picked up wiring changes from owners, handymen and contractors. Some are fine. Some are not. A splice buried in a wall, an extra circuit tapped off the wrong breaker or a subpanel with no ground can hide for decades. When we open the panel, we trace what we can and flag what we find. Solar is a good reason to clean up the past.
Manufactured homes
About 16 percent of homes in Holiday are mobile homes. Solar on a manufactured home is possible in some cases, but it brings its own rules. The partner has to judge the structure. We have to look at the service pedestal and the feeder to the home. If it is not a good fit, we will say so plainly and suggest other ways to cut your bill or add backup.
Near the Anclote River
Holiday borders the Anclote River, where Hurricane Helene pushed 5 to 7 feet of surge above ground in 2024, according to the National Hurricane Center. If you live in a low area, we mount the inverter and disconnects as high as practical and keep conduit runs sealed. No one can make equipment surge-proof. We can keep it out of the first few feet of water and make shutoffs easy to find.
The job in order
- First call or text, with a photo of the panel.
- Visit, open the panel, test and measure.
- Written list of fixes, if any.
- Partner check of the house and the layout.
- One plan covering the panel work and the array.
- Paperwork, then panel work.
- Array install, inverter tie-in and inspection.
- Walk-through of the app and the shutoffs.
2026 incentives in plain terms
There is no federal homeowner clean-energy credit for a system finished in 2026; it ended after 2025. Florida still exempts solar equipment from state sales tax. The state also bars the county from counting an array’s added value in your assessment. If your power provider has net metering, surplus daytime energy can be credited to your account. Consult a tax professional; incentives can change.
Above what the code requires
Code is the minimum we are allowed to do. On old houses we often do more. We replace worn parts we find along the way, with your OK. We torque and log each lug. We add grounding where it is missing on the circuits we touch. We label the new gear in plain language.
Labor warranty
Most electricians give one year on labor. We give two. With a Member Care Plan, coverage reaches five years, and we check the panel and inverter once a year.
How far we come
Holiday is about 25 miles from our shop at 6248 Seminole Blvd.
Start with the panel
Call or text (727) 476-7079 with a photo of your panel door and label. You can also use the request form above.
Holiday solar FAQ
My Holiday home has its original panel. Do I need a new one for solar? Often, yes. Many 1970s panels are not a safe place to tie in an inverter. We test and tell you before anything is ordered.
Can I add solar to a mobile home? Sometimes. The partner must approve the structure, and we check the service pedestal and feeder. If it is not a good fit, we will say so.
What is aluminum branch wiring, and does it matter? Some homes of that era used aluminum wire for outlets and lights. Its connections can run hot. We repair them with approved methods before adding new loads.
Who installs the modules? Our licensed solar partner. We do the panel, the wiring and the tie-in.
Will solar keep power on in a storm? Not on its own. You need a battery or a generator for backup.
How far is Holiday from your shop? About 25 miles from 6248 Seminole Blvd.
Related: solar installation across Tampa Bay · SPAN smart panels in Holiday · generators in Holiday · battery backup in Holiday · electrician in Holiday · Pasco County service area. Nearby: solar in Tarpon Springs · solar in East Lake · solar in Palm Harbor · solar installation in Northdale · solar installation in Gibsonton · solar installation in Palmetto · solar installation in Bradenton.
