Who handles solar installation for Tampa Bay homes from start to finish? Every step of solar installation in Tampa Bay runs through one licensed office. Keywest Lights & Electric manages the whole project as one contract. Licensed partner installers mount the modules and racking on the rooftop. Our own electricians (license EC13014717) do everything that touches your wiring: the load calculation. Any panel or service change, a SPAN smart panel when it fits. And the interconnection to the grid.
Request a solar consultation
Tell us about the property, the panel and what you want to keep running. We reply with next steps and a time for the site visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Solar installation in Tampa Bay: two trades, one contract
A rooftop array is part roofing job and part electrical job. Most homeowners discover that the hard way when a solar salesperson. A roofer and an electrician each point at someone else over a breaker that will not fit or a meter base that is too old. We remove that gap. Our partner crews are licensed for the module and racking work and work under our project. While our electricians own the conductors, the disconnects, the inverter landing and the panel.
You get one point of contact. One itemized quote with the partner equipment and our electrical labor on separate lines. And one schedule that covers permits, inspections and the utility steps for turning the system on.
What our electricians do on a solar project
- Load calculation and service review. So the array. Any battery and your existing appliances fit on the service you have. Or we show you why it needs to grow.
- Panel replacement or service upgrade when a full. Older or undersized panel cannot accept a backfeed breaker or a supply-side connection.
- SPAN smart panel installation so you can watch production next to every circuit in the SPAN Home app and decide what runs during an outage.
- Inverter, disconnect and conduit wiring from the array to the panel, sized and routed for Florida heat.
- Battery-ready layout, so adding storage later does not mean tearing out what we built.
- Commissioning and walkthrough once inspection is signed.
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
Built past the minimum
The adopted electrical code tells us the least a solar connection can be. We treat it as a starting line. That means conductors sized with attic and rooftop heat in mind. Stainless or coated hardware near salt air, labels a firefighter can read in the dark. A panel directory you can actually use. If a shortcut would pass inspection but make the next service call harder, we do not take it.
Solar and SPAN belong together
A SPAN panel turns solar from a number on a monthly statement into something you can see circuit by circuit. You can tell whether the pool pump is eating midday production. Schedule big loads for sunny hours. And, with storage on SPAN’s compatibility list, pick which circuits stay on when the grid drops. We are a SPAN Authorized Installer. So the panel is set up and commissioned by people trained on it.
Want storage too? See home battery backup. Prefer fuel-fired standby power, or a mix of both? See generator installation. Many owners pair a modest array. A battery and a SPAN panel. Then keep a generator interlock or transfer switch as a third layer for long outages.
Questions to settle before anyone climbs a ladder
Shade from oaks and neighboring two-story houses, the age of the shingles or tile. The direction each roof plane faces all shape what an array can produce. If the roof is near the end of its life. Re-roofing first usually beats removing modules a few years later. Our partners judge the roof side. We judge whether the meter base. Main breaker and bus rating can take the new source. And whether an attic run or an exterior conduit path is cleaner. Hurricane exposure along the beaches also influences attachment methods. And those choices are documented in the permit set, not improvised on install day.
Homes, offices and commercial roofs
We plan residential arrays on single-family homes. Townhomes where the association allows it, and beach houses raised above flood elevation. On the commercial side we coordinate larger arrays on offices. Warehouses and retail buildings, including the switchgear, transformer and metering work that comes with them. Bid documents go to proposals@keywestlights.com.
How a solar project runs with us
- Site visit: roof orientation and shading, the panel, the meter, attic space and any existing equipment.
- Itemized quote: partner equipment and installation on their own lines, our electrical scope on ours. No pricing over the phone.
- Paperwork: permits, inspections and the utility interconnection steps, scheduled by us.
- Install days: partners on the rooftop, our electricians at the panel, both on one calendar.
- Close-out: inspection, commissioning, app setup and a walkthrough of shutdown steps.
Tax rules in 2026, without the sales pitch
Some solar ads still promise a large federal refund. For homeowners, that federal residential credit ended for systems whose installation is completed after December 31, 2025. A deposit paid earlier does not change that. What Florida still offers is narrower: qualifying solar energy systems and their components are exempt from state sales tax. The value a qualifying system adds to a home is generally excluded from its property-tax assessment. Exported energy under net metering is credited according to your electric provider’s tariff, and terms differ. Businesses face separate federal rules and may still qualify for a federal clean-energy credit. Consult a tax professional; incentives can change.
Warranties, stated plainly
Our electrical work carries a 2-year workmanship warranty, or 5 years with a Member Care Plan. Modules, inverters and batteries carry their manufacturers’ warranties, and the partner installer’s roof work carries its own. Your quote lists who covers what, so nobody has to sort that out after a storm.
Is your house ready for solar? A pre-visit checklist
Gather these before our electrician arrives and the first visit goes faster:
- Age of the roof and any recent roof work. So the partner installer can judge whether to re-roof first.
- A photo of the main panel label showing its amp rating.
- The last twelve months of electric bills, to size the array to real use.
- Any HOA rules on equipment visible from the street.
- Where you would like the inverter, disconnect and any battery to go.
- Which circuits you want running during an outage.
- Plans for an EV, pool heater or addition in the next few years.
Who does what, at a glance
| Task | Keywest Lights & Electric | Licensed partner |
|---|---|---|
| Panel review, SPAN, service upgrade. | Yes | No |
| Inverter, disconnects, conduit, grounding. | Yes | No |
| Roof attachments, racking, modules. | No | Yes |
| Permits, inspections, grid paperwork. | We coordinate it all. | Supports the roof portion. |
| Warranty on the electrical work. | 2 years. 5 with a Member Care Plan. | Partner warranty on the rooftop work. |
Solar city pages
Pinellas County: Seminole · Bay Pines · North Redington Beach · Redington Shores · Redington Beach · Bardmoor · Indian Shores · Ridgecrest · Madeira Beach · West Lealman · Indian Rocks Beach · Largo · Harbor Bluffs · Belleair Bluffs · Kenneth City · Pinellas Park · Treasure Island · Belleair Shore · Belleair · Belleair Beach · Lealman · South Highpoint · Bear Creek · South Pasadena · Feather Sound · Gulfport · St. Pete Beach · Clearwater · St. Petersburg · Greenbriar · Safety Harbor · Tierra Verde · Dunedin · Oldsmar · Palm Harbor · East Lake
Hillsborough County: Town ‘n’ Country · Westchase · Tampa · Riverview · Brandon
Manatee County: Anna Maria
More cities are being added. Not listed? Call or text (727) 476-7079; we cover about 50 miles around Seminole.
Solar installation FAQ
Do your own crews mount the solar panels? No. Licensed partner installers mount the modules and racking as subcontractors on our project. Our electricians handle the electrical side. From the inverter and disconnects to the panel, SPAN and the grid connection.
Will my existing panel work with solar? Sometimes. A full or older panel may not have room for the solar connection. We check the panel and the service size at the site visit and write any upgrade into the quote before anything is ordered.
Does solar keep my lights on when the grid goes down? Not by itself. A grid-tied array shuts off during an outage for line-worker safety. To keep circuits running you need battery storage or a generator. A SPAN panel lets you choose which circuits get that backup.
Do you quote prices on the phone? No. Every roof, panel and service is different, so we give an itemized written quote after the site visit.
Which cities do you cover? Pinellas, Hillsborough, Pasco, Manatee and Sarasota, out to about 50 miles from our Seminole shop. City pages below give local details.
Related: Battery backup · Generator installation · Commercial generators · SPAN smart panels · Solar, battery and monitoring overview · Panel upgrades · Service upgrades.
