Got a newer house in Gibsonton and a summer power bill that stings? Solar installation in Gibsonton starts from this: summer power bill that stings Solar may help. Solar may help, but the wiring decides how well. Keywest Lights & Electric (EC13014717) handles the electrical half: service checks, inverter and disconnect wiring, the tie-in and an optional SPAN smart panel. A licensed solar partner installs the racking and modules.
Request a solar quote in Gibsonton
Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.
If you need a related service, we also offer jellyfish lighting, and battery backup installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Solar installation in Gibsonton: A young housing stock on the bay
Gibsonton sits on the east side of Tampa Bay in Hillsborough County. Census data for 2020-2024 puts the median build year at 2002. More than half of local homes went up in 2000 or later. About two-thirds are detached single-family houses, and about a quarter are manufactured homes.
Newer homes tend to have 200-amp service and modern panels. That helps. But builders often fill every breaker space, so the inverter may not have a place to land. We check that before anyone sizes an array.
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
Our three-part check
- Capacity. We read the main breaker, bus rating and meter base, then work out how much solar can feed back safely.
- Space. If the panel is full, we look at tandem breakers where allowed, a supply-side tap or a new panel.
- Route. We plan the wire path from the array to the inverter and on to the meter, keeping runs short and out of the attic heat when we can.
Manufactured homes
Roof arrays are not always a fit on manufactured homes. The partner may suggest a ground mount in the yard. In that case we trench and run the feeder to the house, set the disconnects and make the tie-in. Every outdoor box is rated for rain and sun.
Why add SPAN
A SPAN smart panel takes the place of your main panel and puts every circuit in an app. Solar output appears next to what each circuit uses. You can see the pool pump eating midday power and move it to a better hour. If a battery joins the system later, SPAN chooses which loads stay on in an outage. If you never plan to add storage, a standard panel may be all you need.
Split of the work
| Job | Keywest Lights & Electric | Licensed solar partner |
|---|---|---|
| Load math and panel work. | Yes | No |
| Module layout | Inverter spot and wire paths. | Yes |
| Racking and modules. | No | Yes |
| Inverter, conduit, disconnects. | Yes | No |
| Final tie-in and testing. | Yes | Mounting sign-off |
Storm water and salt
In September 2024 the National Hurricane Center recorded a storm tide of about 7 feet above normal high water at the East Bay gauge in Tampa Bay during Hurricane Helene. Low Gibsonton lots near the water can take surge. We mount the inverter and disconnects as high on the wall as access rules allow, and we use stainless or coated hardware outdoors.
Built past code
Code is the least we may do, not the goal. We torque every termination to spec and record it, seal each wall penetration twice, and label every breaker and disconnect in plain words.
Coverage on our labor
The usual offer around here is one year of workmanship coverage. We give two years. On the Member Care Plan, that becomes five, with a yearly look at the inverter wall and panel.
Tax notes for 2026
The federal clean-energy credit for homeowners ended after 2025, so it does not apply to a Gibsonton system finished in 2026. Florida does not charge state sales tax on solar equipment, and the added value of a solar system is excluded from your property assessment. Net metering, if your power provider offers it, can credit surplus output. Consult a tax professional; incentives can change.
Homeowner associations and newer subdivisions
Many newer neighborhoods in southern Hillsborough have deed rules. Florida law limits how far an association can block solar, but it can still ask about placement or color. We help you prepare the site plan, equipment sheets and a simple elevation sketch so the review moves quickly. The partner adjusts the array layout if the board prefers a less visible face of the house.
What your meter does after the switch-on
Once the inspector signs off, the power company installs or programs a bidirectional meter. It counts power you buy and power you send out. Your monthly statement then shows both figures. We explain how to read them, and how the monitoring app’s numbers line up with the meter.
Garage and attic routes
Two-story homes often have long runs from the upper slope down to a first-floor panel. We look for chases, closets and garage walls that hide conduit neatly. Where an attic run is needed, we size the conductors for high temperatures, secure them clear of insulation baffles and keep them away from walkable decking.
Caring for the equipment
Panels themselves need little attention. The inverter’s cooling fins should stay clear of yard clutter, wasp nests and vines. Keep irrigation heads pointed away from the disconnects. If the monitoring app shows a sudden dip, call us before resetting anything more than once.
Start here
Gibsonton is about 25 miles from 6248 Seminole Blvd. Call or text (727) 476-7079, or fill in the form at the top of the page with a photo of your panel.
Gibsonton solar questions
My panel has no open spaces. Can I still go solar? Usually. We may use a supply-side connection or replace the panel. We explain the options before any order is placed.
Can solar go on a manufactured home? Sometimes on top of the home, often on a ground mount. The partner checks the structure, and we wire it to the house.
Will solar power my home in a blackout? No, not without a battery or generator. Grid-tied systems shut down when the grid goes down.
Is SPAN required? No. It is an option that adds circuit control and helps if you add a battery later.
How far is Gibsonton from your shop? About 25 miles from our Seminole location.
Related: solar installation across Tampa Bay · SPAN smart panels in Gibsonton · generators in Gibsonton · battery backup in Gibsonton · electrician in Gibsonton · Hillsborough County service area. Nearby: solar in Riverview · solar in Apollo Beach · solar in Ruskin · solar installation in Holiday · solar installation in Northdale · solar installation in Bradenton · solar installation in Palmetto.
