Solar Installation in Elfers, FL

Most Elfers houses were framed in block during the 1970s, and their wiring is now about fifty years old. Solar installation in Elfers starts from this: houses were framed in block during the 1970s. That age matters more to a solar project than the brand of module. Keywest Lights & Electric (EC13014717) handles the electrical half: we test the service, fix what is tired, mount the inverter and make the grid connection. A licensed partner sets the racking and modules. If the old panel needs to go, a SPAN smart panel can take its place.

Request a solar quote in Elfers

Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Alongside this work, see also jellyfish lighting, and battery backup installation.

Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Electrician in a safety-green logo shirt fastening a solar disconnect beside an inverter on the wall of a pale yellow block ranch home with modules above
A disconnect fastened next to a wall-mounted inverter on a single-story block home.

Solar installation in Elfers: A snapshot of Elfers housing

Elfers is a Pasco County community of about 15,000 people. Bureau survey data for 2020-2024 places the median year built at 1975. About half of all homes went up in the 1970s and roughly one in five in the 1960s. Around eight in ten are detached houses, and about one in ten is a mobile home. Nearly every household heats with electricity, so the panel already carries a heavy load.

What fifty-year-old wiring needs before solar

Before any array is ordered, we open the panel and the meter can. On homes from this period, we often find:

None of these stop a project. They just have to be corrected first, and we price that work in writing so nothing comes as a surprise.

  • Breaker brands that are no longer made, with parts that are hard to buy.
  • Aluminum branch wiring on a few circuits, which needs special connectors.
  • A grounding rod that has corroded or was never bonded to the water line.
  • A 100-amp service that is already near its limit on summer afternoons.

How we split the job

Our electricians own every wire from the inverter to the meter. That covers the disconnects, the conduit runs, rapid shutdown wiring, bonding and the interconnection itself. The partner company handles layout drawings, attachments into the decking, sealed flashing and the modules. One schedule covers both crews, and we are on site for the electrical inspection.

SPAN as the hub

A SPAN smart panel swaps out the old breaker box. Each circuit shows its live use in a phone app, and the solar feed appears next to it, so you can see when the array covers the house. If a battery joins later, the same panel decides which rooms stay powered in an outage. It is an option, not a requirement. A healthy standard panel works too.

  • Florida electrical contractor license EC13014717, licensed & insured
  • Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
  • 2-year workmanship warranty, 5 years with a Member Care Plan
  • SPAN Authorized Installer and Home Depot preferred contractor
  • Open 24/7 for electrical emergencies: call or text (727) 476-7079
  • Projects up to $2 million, with bonding up to $1 million

Mobile and manufactured homes

Manufactured homes have their own rules for attaching equipment and for where the service disconnect sits. Some can carry an array; many are better served by a ground mount in the yard. We look at the home and its paperwork before suggesting either one.

Better than the minimum

Code tells you the least you can legally do. Our habit is to torque every lug to the label value and record it, use liquid-tight fittings outdoors, add surge protection at the panel and print disconnect labels a stranger could read in the dark.

Labor promise

Many contractors cover their labor for twelve months. Ours runs two years, and members of our Member Care Plan get five years plus a yearly check-up.

Storm notes for west Pasco

The National Hurricane Center reports that a USGS sensor in Pasco County read 7.60 feet above normal high tide during Helene in 2024. Responders made about 200 high-water rescues in the county, and at least 9,900 structures were damaged, most by surge near the coast. Inland streets fared differently, but every Elfers install gets disconnects mounted high and fittings rated for driving rain.

2026 tax picture

The federal homeowner solar credit ended after 2025, so an Elfers system finished this year will not claim it. Florida still waives sales tax on eligible solar equipment, and the added value of a residential array is excluded from property tax assessments. Your power company can explain how it credits power you send back under net metering. Consult a tax professional; incentives can change.

Ground mounts on deep lots

Many lots here are wide, with room in the back yard. A ground-mounted array avoids attaching anything to an older roof and is easier to clean and inspect. The trench back to the house is ours to dig and wire. We keep it deep, use proper conduit and mark it on a site drawing for your records.

Words you will hear

  • Interconnection. The point where the solar circuit joins your home’s wiring.
  • String. A group of modules wired in series.
  • Microinverter. A small inverter mounted under each module instead of one large unit.
  • Backfeed breaker. A breaker that lets solar power flow into the panel.

Heat pumps, water heaters and pool pumps

Almost every Elfers home heats with electricity, and many still run an older tank water heater and a single-speed pool pump. Those three loads shape how much of your production you use on site. A variable-speed pump set to run at midday, or a heat pump water heater on a timer, can soak up solar output that would otherwise flow back to the grid at a lower credit. We wire those circuits properly and can put each one on its own SPAN breaker so you can watch it.

Getting started

Elfers lies about 27 miles from our shop at 6248 Seminole Blvd. Call or text (727) 476-7079, or send a photo of your open panel through the request form near the top.

Elfers solar questions

My panel is the original from the 1970s. Can it take solar? Sometimes, but often it needs to be replaced first. We test it and show you what we find.

Is a ground mount better than a roof mount here? On a deep lot with an older roof, it often is. We compare both.

Do I need a battery? Only if you want power during outages. Solar alone shuts off when the grid does.

Can solar go on a manufactured home? Sometimes. It depends on the home’s structure and paperwork.

How far is Elfers from your shop? About 27 miles from 6248 Seminole Blvd.

Related: solar installation across Tampa Bay · SPAN smart panel installation · generators in Elfers · battery backup in Elfers · electrician in Elfers · Pasco County service area. Nearby: solar in Beacon Square · solar in Holiday · solar in Trinity · solar in Key Vista · solar installation in Bradenton · solar installation in Ellenton · solar installation in Cheval.