Solar Installation in Cheval, FL

Cheval homes are mostly from the late 1980s through the 2000s, which puts them in a sweet spot for solar. Solar installation in Cheval starts from this: homes are mostly from the late 1980s through. The wiring is modern enough to be sound, but the original panels are often packed full. Keywest Lights & Electric (EC13014717) sorts out that capacity question, then mounts the inverter, runs the disconnects and completes the grid tie. A licensed partner installs the racking and modules on top of the home. Ask about a SPAN smart panel if you want circuit-level control.

Request a solar quote in Cheval

Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

If you need a related service, we also offer jellyfish lighting, and battery backup installation.

Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Two electricians in charcoal and gray logo shirts reviewing a tablet beside an exterior panel and inverter on a tile-roof stucco home with solar modules
Two crew members review a plan beside a wall-mounted inverter and panel.

Solar installation in Cheval: The housing mix in Cheval

Cheval is a community in northwest Hillsborough County with about 14,000 residents. According to Census Bureau estimates for 2020-2024, the median home was built in 1994. Roughly a quarter of homes date to the 1980s, a bit more to the 1990s and about a quarter to the 2000s. About six in ten units are detached houses and close to three in ten sit in buildings of five or more units.

When the panel is full

A 1990s home often has a 150- or 200-amp panel with every slot used. Solar needs a breaker space or a supply-side connection, and the main bus has a rating that limits how much it can accept. We check three things:

The answer decides whether you need a new panel, and we explain it with a simple sketch.

  • The bus rating against the planned inverter output.
  • Free spaces, or circuits we can safely combine with tandem breakers where allowed.
  • Whether a supply-side tap ahead of the main breaker is the cleaner path.

Tile tops and stucco walls

Barrel and flat tile need careful attachment work, and that belongs to our partner’s crew. Our share is on the walls and inside. On stucco, we use proper anchors, seal every penetration and paint conduit to match the house if you ask. The goal is a clean run that does not look like an afterthought.

  • Florida electrical contractor license EC13014717, licensed & insured
  • Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
  • 2-year workmanship warranty, 5 years with a Member Care Plan
  • SPAN Authorized Installer and Home Depot preferred contractor
  • Open 24/7 for electrical emergencies: call or text (727) 476-7079
  • Projects up to $2 million, with bonding up to $1 million

Who does what

You get one point of contact and one combined timeline.

TaskOur electriciansLicensed partner
Panel and service work.Yes
Inverter, disconnects, conduit.Yes
Grid tie and inspection support.Yes
Array layout and attachments.Yes
Modules and flashing.Yes

Where SPAN fits

A SPAN smart panel replaces a crowded load center with breakers you can switch and monitor from a phone. It shows solar production beside each circuit’s use. If you later add a battery, SPAN picks what runs during an outage. It is a good fit when the old panel is full anyway; if yours has room and is in good shape, a standard panel does the job.

Shared buildings and associations

For a unit in a building with several owners, the exterior usually is not yours alone to change. Talk with the building’s owners or board first. Most of the solar work we do in Cheval is for detached homes.

Going past code

Code sets the minimum, and we treat it that way. We use torque screwdrivers and log values, add a surge device at the panel, bond everything to a verified ground and put plain-language labels on each disconnect.

Workmanship coverage

The common term in the trade is one year on labor. We stand behind ours for two years, or five with the Member Care Plan.

Rain and wind

Milton brought heavy rain across the Tampa Bay area in October 2024, with a storm total of 20.40 inches reported near St. Petersburg, according to the National Hurricane Center. Hillsborough also saw homes destroyed during Helene that September. We seal conduit entries, slope runs to drain and mount equipment where water won’t pool.

Solar savings rules this year

For 2026, a Cheval homeowner should not plan on the federal residential solar credit, which ended with 2025. Florida does exempt qualifying solar equipment from sales tax and excludes added solar value from property assessments. Ask your electric provider about its net metering credits for exported energy. Consult a tax professional; incentives can change.

Pool equipment and midday use

Many Cheval homes have a screened pool. A variable-speed pump scheduled for late morning through mid-afternoon uses solar power as it is made. We can rewire the pump and its timer to match the array’s output curve.

Electric cars in the garage

A Level 2 charger draws as much as a large range or dryer. If an EV is in your plans, tell us during the first visit. We size the panel, the feeder and the solar connection together, so the charger circuit fits without a second upgrade. Charging during sunny weekend hours lets the array feed the car directly.

Trees, setbacks and neighborhood rules

Large oaks shade many lots, and some communities review exterior equipment before work begins. Our partner models the shade and drafts the layout; we prepare the electrical one-line drawing. If your neighborhood requires approval, both documents usually go into one package for the review committee.

A short glossary

  • Bus rating. The maximum current the panel’s metal bars are built to carry.
  • Supply-side tap. A solar connection made between the meter and the main breaker.
  • Production meter. A meter that records only what the array generates.

Next step

From our shop at 6248 Seminole Blvd, Cheval is about 28 miles away. Call or text (727) 476-7079, or send panel photos through the form at the top of the page.

Cheval solar questions

My panel has no empty slots. Can I still get solar? Yes. We may use a supply-side tap or recommend a new panel.

Can you work around a tile covering on top of the house? Our partner handles tile attachments. We handle everything electrical.

Is SPAN required? No. It helps with monitoring and future batteries.

Will solar run my house in an outage? Not by itself. You need a battery or generator for that.

How far is Cheval from your shop? About 28 miles from 6248 Seminole Blvd.

Related: solar installation across Tampa Bay · SPAN smart panels in Cheval · generators in Cheval · battery backup in Cheval · Hillsborough County service area. Nearby: solar in Citrus Park · solar in Westchase · solar in Lake Magdalene · solar in Carrollwood · solar installation in Sun City Center · solar installation in University · solar installation in Elfers · solar installation in Bradenton.