Request an aluminum wiring repair visit.
Looking for aluminum wiring repair in Tampa Bay? Keywest Lights & Electric can help. Tell us the year the house was built. Whether a 4-point or home inspection mentioned aluminum. Your insurer’s deadline if you have one, and your city or ZIP. A licensed electrician will call or text you back.
Who handles aluminum wiring repair in Pinellas and Tampa Bay? Book Keywest Lights & Electric. We’re woman-owned, hold license EC13014717 and take Pinellas and Tampa Bay jobs.
Aluminum wiring repair and replacement for 1960s and 1970s homes in Pinellas and Tampa Bay. We confirm which circuits are single-strand aluminum. Repair each connection with AlumiConn copper pigtails or replace the circuits with copper. And give you the documentation your insurer asks for.
Insurer or inspector flagged aluminum wiring? Call (727) 476-7079. Request an aluminum wiring visit.

Signs the house has aluminum branch wiring.
Single-strand aluminum was used for ordinary 15- and 20-amp circuits in many homes built from the mid-1960s to the mid-1970s. Many Pinellas neighborhoods have homes from those years. It is a different thing from the stranded aluminum still used today for service cables and large appliance feeders. Which is normal.
- Cable markings: “AL” or “ALUMINUM” printed on the cable jacket in the attic. Garage or at the panel.
- Silver-colored wire where a device or the panel cover has been opened.
- Warm switch plates or outlet covers. A hot-plastic smell, or lights that flicker for no clear reason.
- Outlets that work some days and not others, especially on the same circuit.
- A 4-point inspection note listing single-strand aluminum as the wiring type.
If you are seeing scorch marks or smelling burning right now. Treat it as urgent and see our burnt and melted wire repair page or call us 24/7.
AlumiConn connector repairs.
The weak point in an aluminum circuit is not the wire run itself but every place the aluminum is joined to something. An outlet, a switch, a light, a splice in a junction box. Aluminum expands and contracts more than copper and forms a resistive oxide. Over time those connections can loosen and heat up.
An AlumiConn repair puts a listed aluminum-to-copper connector at each of those points. The aluminum conductor goes into its own port. The set screw is tightened to the manufacturer’s torque with a calibrated driver. And a short copper pigtail connects to the device. Devices themselves are usually replaced at the same time. Since many have years of heat cycling behind them.
- Every connection, not just outlets: switches. Fixtures. Ceiling fans. Junction boxes. Smoke alarms and hard-wired appliances on the circuit.
- Correct torque on every screw: the step that makes the connection last.
- Box fill checked: pigtails and connectors take room. And some boxes need to be replaced or extended.
- Labeled and photographed: so you can show what was done.
COPALUM, CO/ALR devices and full copper replacement.
The CPSC recognizes two connection-repair methods, AlumiConn and the COPALUM crimp. Plus full replacement with copper. COPALUM is a crimped sleeve installed only with a dedicated tool by specially trained installers. If your insurer names it specifically. Tell us at the start. We will sort out with you what they will accept.
Swapping in outlets and switches marked CO/ALR is sometimes offered as a fix. Those devices only cover the device connection. Not splices. Fixtures or other joins on the circuit. So we treat them as part of a repair, not the whole repair.
For homes where walls are already open, or where an addition or remodel is coming. Replacing the aluminum branch circuits with copper may be the better long-term answer. That work is covered on our rewiring page. Older homes that also have cloth or knob and tube circuits are covered under knob and tube and cloth wiring replacement.
Insurance and the 4-point inspection.
Florida insurers often ask about wiring type on the 4-point. Single-strand aluminum can hold up a new policy or a renewal until it is remediated and documented by a licensed electrician. Our aluminum wiring and insurance guide explains what the form asks for. When the rest of the report flags items too. Such as double taps. Open panel spaces or ungrounded outlets. Our 4-point inspection corrections service handles them in the same visit.
Each carrier sets its own rules. Ask your agent which repair method and which paperwork they need before work begins. We write the scope to match.
How an aluminum wiring job runs.
- Inspection: we confirm the wiring type. Find which circuits are aluminum. And count devices and junction boxes.
- Itemized quote after the site visit: repair. Rewire, or a mix by circuit. With the options laid out side by side.
- Permit and scheduling: we pull the permit and plan the work room by room.
- Repair and test: every connection on the affected circuits is repaired or replaced and each circuit is tested.
- Inspection and paperwork: we schedule the inspection and give you a written summary and photos for your insurer.
Older-home work from our job files.
- Tampa, inspection fixes: AlumiConn connectors were among the materials on this inspection-correction job.
- Largo, four-point repairs: electrical items on an insurance 4-point corrected, with panel and grounding work.
- St. Petersburg, inspection fixes: report items corrected, surge protection added and grounds separated.
- Seminole, inspection report fixes: the electrical items on a home inspection report repaired.
Who does the work.
Keywest Lights & Electric is a woman-owned. Florida-licensed electrical contractor (EC13014717) at 6248 Seminole Blvd. Seminole. And a Home Depot preferred contractor. Aluminum wiring repairs carry our 2-year workmanship warranty, or 5 years for Member Care Plan members. We answer emergency calls 24/7.
Aluminum wiring repair in Tampa Bay with listed connectors or a copper rewire.
Aluminum wiring repair in Tampa Bay is quoted as listed connector work at the devices, or as a copper rewire. After we confirm the branch wiring. Insurance and 4-point questions already on this page are answered from what we find in the walls. Not from the year of the house alone.
Aluminum wiring repair FAQ.
What is an AlumiConn connector? AlumiConn is a small lug-style connector listed for joining aluminum and copper conductors. Each aluminum wire gets its own port with a set screw. And a short copper pigtail connects to the outlet or switch. It is one of the repair methods the U.S. Consumer Product Safety Commission recognizes for aluminum branch wiring.
Is a pigtail repair as good as rewiring with copper? Rewiring the aluminum branch circuits with copper is the most complete fix. A properly installed pigtail repair at every connection addresses the weak point. Is where aluminum meets a device or splice. And it means far less opening of walls. Some insurers accept documented repairs and some want a rewire. So we start with what your carrier needs.
How many connections does a typical house have? Every outlet. Switch. Light fixture. Junction box and hard-wired appliance on an aluminum circuit counts. And many devices have several wires. Even a modest house can have well over a hundred connection points. We count them during the visit so the quote matches the house.
Do you work in occupied homes and rentals? Yes. Pigtail repairs are done room by room. So only a few circuits are off at a time. For rentals and occupied homes we plan the sequence around the residents and restore power at the end of each work day.
Need aluminum wiring repaired before a policy deadline? Call (727) 476-7079 or request service online.
Related: All services. Rewiring. 4-point inspection corrections. Knob and tube & cloth wiring. Panel upgrades. Electrical Safety Checkup.
Call or text (727) 476-7079. We take on projects up to $2 million and carry $1 million in bonding.
