Thinking about solar for a Carrollwood house that still has its first electrical panel? Solar installation in Carrollwood starts from this: house that still has its first electrical panel. Start with the panel, not the modules. Keywest Lights & Electric (EC13014717) checks the service, plans a SPAN smart panel and wires the inverter. A licensed partner crew mounts the racking and sets the modules on your house.
Request a solar quote in Carrollwood
Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.
On the same streets, we also handle ev charger installation, jellyfish lighting, panel upgrade replacement, and battery backup installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Solar installation in Carrollwood: The panel came first in 1984, too
The median Carrollwood home was built in 1984. About 42 percent of the homes here went up during the 1980s. That tells us a lot before we even park the truck. Many of these houses still run on the service size that made sense forty years ago. Back then, nobody planned for an inverter, an EV charger and a pool pump on the same board.
So the first visit is about the load center. We open the cover. We look at the bus, the breakers, the grounding and the space left over. We also ask what you added since you moved in. A new heat pump or a hot tub can change the answer.
If the panel is tired, solar is not a reason to hide that. It is a reason to fix it once and do it right.
Old neighborhood, new loads
Hillsborough County’s plan says the first Carrollwood was built around 1957, with 983 homes around 200-acre Lake Carroll. The area grew outward from there for decades. Today about 59 percent of homes are single-family detached houses. The rest are townhomes, duplexes, small apartment buildings and mobile homes.
That mix matters. A detached house usually gives us a clear wall for the inverter and a short run to the meter. An attached home may share walls, and it may need written approval from the owners’ group before anything goes on the outside. Tell us early if that applies to you. It keeps the schedule honest.
How the work is split
We keep this line clear on purpose. We are electricians. We do not set modules, and we do not pretend to. The partner crew does that part, and we handle every wire that ties the array to your home.
| Task | Done by | What you can expect |
|---|---|---|
| Load study and panel review. | Our electricians | A written note on whether the service can take solar as it is. |
| SPAN smart panel, if you want one. | Our electricians | Circuit-by-circuit control from a phone app. |
| Racking and modules on the house. | A licensed solar partner. | Mounting that matches the covering and the layout. |
| Inverter, disconnects, conduit and labels. | Our electricians | A clean, labeled wall that an inspector can read. |
| Final tests and sign-off. | Both crews | A walk-through before anyone leaves. |
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
Why SPAN fits a solar job here
A SPAN panel replaces the old breaker panel with one you can watch and control. Each circuit shows up in the app. You can see what the array is making and what the house is using, room by room.
That is useful on a sunny day. It is more useful when the grid goes down and you add a battery later. SPAN lets you choose which circuits stay on. A plain panel cannot do that. If a battery is in your future, it costs less effort to plan for it now than to rework the wall later.
You do not have to buy SPAN to get solar from us. We will tell you plainly when a standard panel upgrade is the better fit for your house.
What a first visit looks like
- We talk about why you want solar. Lower bills, storm backup and a smaller footprint lead to different designs.
- We open the panel and measure. We note the main breaker, the bus rating and free spaces.
- We look at the outside wall where the inverter and disconnects would go.
- The partner looks at the covering and the layout for the modules.
- You get one plan that shows both halves of the job.
- Nothing gets ordered until you say yes.
Shade, trees and the direction of the house
Older neighborhoods often have tall shade trees that were planted when the houses were new. Big trees are lovely in July. They are not kind to an array. The partner crew checks which faces of the house get clean sun from late morning through the afternoon. They also look for vents, skylights and old patches that would get in the way.
Sometimes the answer is a smaller array on the best face. Sometimes it is waiting until a worn covering is replaced. We would rather tell you that now than wire a system that sits in shade half the day.
After the switch is flipped
Once the system passes its final inspection, the inverter and the SPAN app start keeping a running record. You can see daily output, the busiest hours of use and any circuit that suddenly draws more than it should. A spike on one breaker can point to a failing motor or a loose connection long before it becomes a bigger problem.
If something in the numbers looks odd, send us a screenshot. One of our electricians will read it with you and tell you whether a visit makes sense.
What helps before we arrive
- A clear photo of the panel door label and the main breaker.
- A recent electric bill, so we can see your monthly use.
- A list of big appliances, such as a pool pump, well pump, spa or EV charger.
- Notes on any past storm damage, leaks or surge events.
- The name of anyone who must approve outside work, if you share walls.
Tax rules for a 2026 system
The federal homeowner credit for clean energy ended after 2025, so a system finished in 2026 does not get it. Florida still exempts solar equipment from state sales tax. The state also keeps the added value of a home solar system out of your property assessment. If your power company offers net metering, extra daytime output can earn a credit on your bill. Ask your tax advisor how this applies to you. Consult a tax professional; incentives can change.
Built tighter than the minimum
The electrical code sets the floor. We treat it as a floor. On Carrollwood jobs we torque every lug to the listed value and write it down. We strap long conduit runs closer than the rules ask. We keep the working space in front of the inverter clear and wide. We label every disconnect in plain words, so the next person who opens the wall knows what they are looking at.
Labor coverage that lasts longer
Most electrical shops stand behind their labor for one year. We stand behind ours for two years. Join our Member Care Plan and it runs five years, with a yearly check of the connections and the inverter wall.
Getting here from the shop
Our shop is at 6248 Seminole Blvd. Carrollwood is about 23 miles away, so it is well inside the area we serve every week.
Tell us about the house
Call or text (727) 476-7079. A photo of your panel label helps a lot. So does a rough list of the big loads in the house. You can also use the form at the top of this page.
Questions from Carrollwood homeowners
My Carrollwood house still has its original panel. Can it take solar? Sometimes. We have to open it and measure first. If the bus or main breaker is too small, we will say so and show you the fix before any modules are ordered.
Who puts the modules on my house? A licensed solar partner does. Our electricians do the panel, the inverter wiring, the disconnects and the tests.
Do I need SPAN to go solar? No. SPAN is a choice, not a rule. It helps most if you want to add a battery later and pick which circuits stay on.
Is there still a federal credit if we finish in 2026? No. The federal homeowner credit ended after 2025. Florida’s sales-tax exemption and property assessment rule for solar still apply. Consult a tax professional; incentives can change.
I live in a townhome. Is that a problem? Not always, but shared walls and owners’ group rules can change the plan. Tell us at the start so we can ask the right questions.
Will solar alone keep my lights on during a blackout? No. A grid-tied inverter must shut off when utility power drops, so line workers stay safe. To keep circuits running, you need a battery or a generator with the right transfer gear. Our home battery backup and Carrollwood generator pages explain both options.
How far is Carrollwood from your shop? About 23 miles from our shop at 6248 Seminole Blvd.
Related: solar installation across Tampa Bay · SPAN smart panels in Carrollwood · generators in Carrollwood · battery backup in Carrollwood · electrician in Carrollwood · Hillsborough County service area. Nearby: solar in Citrus Park · solar in Egypt Lake-Leto · solar in Town ‘n’ Country · solar installation in Holmes Beach · solar installation in Keystone · solar installation in Tarpon Springs · solar installation in Ruskin.
