Need restaurant and commercial kitchen electrical in Tampa Bay? Book Keywest Lights & Electric. We’re woman-owned, hold license EC13014717 and take jobs across Tampa Bay.
Request a restaurant electrical quote
Tell us the type of business, the equipment list if you have one, the address and your target opening date. Plans or a photo of the panel help. A licensed electrician will reply.
We wire restaurants and commercial kitchens in Pinellas and Tampa Bay. That means equipment circuits, GFCI and wet-area wiring, panel capacity, lights and exit signs. A licensed commercial electrician installs and corrects it.
For restaurant build-outs that go to bid, email the plans and specs to proposals@keywestlights.com. We take projects up to $2 million, and bonding is available up to $1 million.
Opening, expanding or fixing a kitchen? Call (727) 476-7079 · Describe the space


A kitchen asks more of its wiring
A commercial kitchen is one of the hardest places for electrical equipment. Heat, grease, steam, water from wash-downs and constant bumping from carts and crates all work against receptacles, cords and enclosures. Add a long list of heavy equipment that often runs at the same moment, and the margin for error in the wiring is small.
Good kitchen electrical is mostly about matching. Each circuit fits its appliance. Each device fits its spot. And the whole panel fits the load of your busiest day.
What we handle
- Equipment circuits: ranges, fryers, ovens, dishwashers, ice machines, walk-in coolers and freezers, each on a circuit sized from the nameplate.
- Prep and service areas: GFCI outlets, counter-height outlets, and power for warmers, mixers and registers.
- Wet and wash-down areas: conduit, fittings and covers suited to moisture and cleaning.
- Hoods and ventilation: power and controls for exhaust and make-up air, wired to the equipment instructions.
- Lighting: bright, even, easy-to-clean fixtures in the kitchen and a warm layout in the dining room, with exit and emergency lights as required.
- Panels and service: new subpanels, load checks and, when the building needs more capacity, a service upgrade.
For a full tenant space, see commercial build-outs and tenant improvements. For a larger service, see commercial electrical service upgrades.

Keeping the kitchen running
When a fryer circuit or a walk-in cooler loses power, the cost is lost food and lost service. Repairs in a working kitchen are planned around that: we find the fault, make the circuit safe and restore refrigeration first.
- Tripping breakers: we test the load and the breaker, and tighten or replace failing connections.
- Damaged receptacles and covers: broken or corroded devices are replaced with ones suited to the area.
- Warm panels and burnt smells: treated as urgent. We open the panel, find the loose or overloaded connection and correct it.
- Added equipment: a new unit gets its own circuit instead of sharing one that is already full.
Opening on schedule
New restaurants live and die by their opening date. Electrical work sits in the middle of that schedule. Rough-in comes before walls close. Panels and hookups come before inspections. Final connections happen once the equipment arrives. We work with owners, general contractors and kitchen equipment suppliers so the electrical does not become the delay.
- Walk the space and the plans: we confirm the equipment list, the panel capacity and the circuit schedule.
- Rough-in: conduit, cable and boxes go in before walls and ceilings are closed.
- Trim-out and hookups: devices, fixtures and equipment connections are completed and labeled.
- Inspection and turnover: we meet the inspector, correct any items and leave a labeled panel.

Who does the work
Keywest Lights & Electric is a woman-owned Florida electrical contractor. We are licensed (EC13014717) and insured, and based at 6248 Seminole Blvd in Seminole. Home Depot lists us as a preferred contractor, our installs are backed for two years, and we answer emergency calls around the clock.
Kitchen types and the loads they bring
- Pizza shops: deck or conveyor ovens, dough mixers and walk-in coolers.
- Bakeries and cafes: espresso machines, proofers and display cases.
- Bars and breweries: glycol chillers, keg coolers and ice machines.
- Fast-casual and franchise kitchens: fryers, grills, warmers and drive-thru equipment.
- Banquet halls and caterers: warming cabinets, kettles and portable equipment circuits.
Every menu changes the electrical plan. A pizza shop and a sushi bar of the same size can need very different circuits. So we start from the equipment list and nameplate data, not a stock layout. That keeps breakers from tripping at the lunch rush and avoids paying for capacity you do not need.
Generators for restaurants: a standby generator keeps walk-in coolers, freezers and registers running in an outage. A storm does not cost you your stock. We install units of any size with the transfer switch and a separate panel for the loads that must stay on. See commercial generator installation and our commercial maintenance contracts.
A restaurant in a shopping center often shares a landlord and a lot with other tenants. The center itself is covered on retail and shopping center electrical.
We also do apartment electrical and church electrical work.
Restaurant and commercial kitchen electrical in Tampa Bay for openings and repairs
We size the work to the line equipment, hoods and outlets your kitchen actually runs. Openings are scheduled around the builder. A repair during service is planned so the line comes back without guessing at the load.
Restaurant and commercial kitchen electrical FAQ
Do you need our equipment list before quoting? Yes. The equipment schedule with voltage, phase and amperage lets us size circuits and the panel accurately.
Can you wire equipment for a restaurant build-out or a new tenant? Yes. We run the circuits for ranges, fryers, ovens, dishwashers, walk-in coolers, ice machines, hood controls and prep outlets. We work with the equipment supplier, so every circuit matches the nameplate on the unit.
Why are the outlets in a commercial kitchen different from a house? Kitchens are wet, greasy and hard-used. Outlets near sinks and prep areas need GFCI protection. Wiring in wet and wash-down zones needs the right conduit and boxes. And covers must stand up to cleaning. We choose devices and fittings for the way the room is actually used.
Our breaker keeps tripping when everything is running at lunch. What is wrong? Usually the load is more than the circuit or panel was planned for, or a piece of equipment is failing and drawing extra current. We measure the load, check the breaker and connections, and tell you whether the fix is a repair, a dedicated circuit or a panel upgrade.
Can you work around our business hours? Yes. We schedule rough-in and shutdown work for slow hours, evenings or closed days when we can. We plan power-off times with you ahead, so a kitchen is not left without cold storage.
Do you handle hood, lighting and exit signs too? We wire the hood and make-up air controls to the equipment instructions, light the kitchen and dining area, and install exit and emergency lighting. Fire suppression systems are installed and tested by their own licensed specialists, and we tie in the electrical side.
Can you take over a job or fix work another contractor left unfinished? Yes. We look over what is there, correct anything unsafe or out of code, and finish the circuits and panel work so the space is ready for its final inspection.
Planning a kitchen or fighting a power problem? Call (727) 476-7079 or use the form above.
See also:
