Do you install commercial generators in Tampa Bay? Quick answer: Yes. Keywest Lights & Electric installs commercial standby generators of any size, including 150 kW, 250 kW and larger units, with the transfer switches, feeders and switchgear work to go with them, for businesses in Pinellas, Hillsborough and Pasco counties from our shop at 6248 Seminole Blvd in Seminole.
Request a commercial generator walk-through
Tell us the building type and size, what has to stay running in an outage, whether you have natural gas on site, and your city or ZIP. A licensed electrician will call or text you back.
Need backup power for your building? Call (727) 476-7079 · Request a generator walk-through · Plans and bids: proposals@keywestlights.com

Generators of any size, from small offices to 250 kW and up
Commercial backup power is not one product. A dental office may need a modest unit to keep its records, refrigeration and a few circuits alive. A hotel, cold-storage warehouse or multi-tenant building may need 150 kW, 250 kW or a larger generator, sometimes more than one. We install the full range and size each system from the building’s actual loads, not a guess.
- Standby generators on natural gas, propane or diesel, set on a pad with the clearances the manufacturer and code require
- Automatic transfer switches sized to the generator, with service-entrance rated switches where the design calls for them
- Feeders and conduit between the generator, transfer equipment and distribution panels
- Load panels that separate emergency, legally required and optional loads when the design calls for it
- Startup and transfer testing before we hand the system over, with the owner or facility staff on site
Planning a commercial generator: load, fuel and placement
Three questions drive every project. What has to run? We list the loads you need during an outage, such as lighting, refrigeration, IT, elevators, pumps and HVAC, and size the generator to start and carry them. What fuel? Natural gas avoids refueling during long outages where service is available; diesel stores fuel on site and suits larger units. Where does it go? We look at setbacks from doors, windows and air intakes, crane or truck access for setting the unit, flood exposure, and noise toward neighbors.
On engineered projects we work from the drawings and coordinate with the engineer of record. On smaller buildings we help you work out the scope and bring in an engineer when the job needs one.
Hotels, offices, restaurants and warehouses
Hotels: life safety lighting, elevators, guest corridors and front-desk systems. See hotel and hospitality electrical. Offices: server rooms, security and the circuits people need to keep working; see office building electrical. Restaurants: walk-in coolers, freezers and point-of-sale, so a storm does not cost a week of inventory; see restaurant and commercial kitchen electrical. Warehouses: refrigeration, dock equipment and controls; see warehouse and industrial electrical.
Some Florida facilities, such as nursing homes and assisted living facilities, have state emergency power requirements. We build to the design your engineer and the authority having jurisdiction approve.
Service, switchgear and maintenance after the install
A large generator often means changes to the electrical service or switchgear. We handle those on the same project; see commercial electrical service upgrades. After startup, regular transfer tests and checks before hurricane season keep the system ready. Businesses can buy our Member Care Plan as a maintenance contract; see commercial electrical maintenance. Thinking about backup power? See battery backup hookup for Pinellas homes.
Who installs your generator
Keywest Lights & Electric is a woman-owned business licensed in Florida as EC13014717, at 6248 Seminole Blvd, Seminole FL 33772, in business since 2010. We take on commercial projects up to $2 million, with bonding up to $1 million. Our workmanship carries a 2-year warranty, or 5 years for Member Care Plan members. Generator bid packages go to proposals@keywestlights.com. For home standby and portable generator hookups, see residential generator installation.
Start with all of our electrical services for the basics. Other commercial services: apartment and multifamily electrical with KWLE, the main church electrical work page, the main commercial build-outs page and the main commercial electrical construction page.
Testing, records and the cutover
A standby system only earns its keep if it starts when it is needed. Emergency and legally required systems built under NFPA 110 carry scheduled exercise and load testing, and many owners keep a simple log that inspectors or insurers can review. At handover we walk facility staff through the transfer switch display, alarms and manual controls, and we can set up a maintenance routine so batteries, block heaters and transfer timing are checked on a regular cycle.
Tying a new generator into a working building means a planned shutdown. We set the window with you, often outside business hours, coordinate any service changes with your power company and the fuel work with your gas supplier or fuel vendor, and keep the outage as short as the work allows.
Commercial generator installation in Tampa Bay, sized to the building
Commercial generator installation in Tampa Bay starts with a load list, not a catalog size. We can install commercial generators of any size, from a small unit that covers a server room and emergency lighting to a whole-building standby system with an automatic transfer switch. A walk of the electrical room, the proposed pad and the fuel source (natural gas where it is available, or propane) tells us what will fit the site and the manufacturer’s clearances.
Code requires a safe installation, transfer equipment and proper exhaust clearance; that is the minimum. We also plan exercise schedules, service access and how the generator will work with any existing fire pump, elevator or refrigeration load so a test run does not surprise the building. Businesses can add a Member Care Plan as a maintenance contract after the install. Bids and specifications go to proposals@keywestlights.com.
Commercial generator installation FAQ
Can you install any size unit for commercial generator installation in Tampa Bay? Yes. We install commercial generators of any size, chosen from a load calculation and a site review. The right unit depends on what you need to keep running, the available fuel and the space for the pad and the exhaust path.
How do you keep our business running while the generator is tied in? We plan the shutdown window with you, often after hours, prepare everything we can beforehand, and keep the outage as short as the tie-in allows.
What size commercial generators do you install? Any size the building needs. We install standby generators for small offices and restaurants, and large units such as 150 kW, 250 kW and bigger for hotels, warehouses and multi-tenant buildings. The right size comes from a load study of what must stay on during an outage.
Do you install automatic transfer switches? Yes. Every standby system needs a way to move the building from utility power to the generator and back. We install automatic transfer switches sized to the generator and to the loads they carry, and we test the transfer before we turn the system over.
Can a generator back up only part of the building? Yes. Many owners back up life safety, refrigeration, IT rooms, elevators or key HVAC instead of the whole building. We separate those loads onto their own panel so a smaller generator can carry them.
Do you handle permits and inspections? Yes. We pull the electrical permit, coordinate inspections, and work with your general contractor, engineer and gas or fuel supplier on the pad, fuel and setback requirements.
How long does a commercial generator project take? It depends on the generator size, equipment lead times, engineering and permitting, and how much switchgear work is involved. We give you a schedule with the proposal once the equipment and scope are set.
Who do we send bid documents to? Send plans, specs and bid invitations to proposals@keywestlights.com. We take on projects up to $2 million, with bonding up to $1 million.
Ready to plan backup power? Call (727) 476-7079, request service online, or send plans to proposals@keywestlights.com.
Related: Commercial electrician · Commercial service upgrades · Commercial maintenance · Hotel electrical · Warehouse electrical · 24/7 emergency electrician · rooftop solar electrical work in Tampa Bay
