Commercial Electrical Service Upgrades in Tampa Bay

Who upgrades commercial electrical services in Tampa Bay? Keywest Lights & Electric, a licensed (EC13014717), woman-owned electrical contractor at 6248 Seminole Blvd. We take commercial projects up to $2 million with bonding up to $1 million, and bids go to proposals@keywestlights.com.

Request a commercial service upgrade review

Tell us the building address and type, the size of the current service if you know it (amps and voltage), what you are adding (equipment, HVAC, EV chargers, a new tenant), and your timeline. A licensed electrician will call or text you back.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Commercial electrical service upgrades in Pinellas, Hillsborough and Pasco: more amps for growing tenants, single-phase to three-phase conversions, 208V and 480V services, new switchboards and meter centers, and feeder and panel replacements, from the load study through utility coordination and cutover.

Adding equipment, a tenant or a kitchen the building cannot power? Call (727) 476-7079 · Request a service upgrade review · Plans: proposals@keywestlights.com

KWLE electricians bending conduit in a commercial electrical room
KWLE electricians bending conduit in a commercial electrical room.

When a commercial building outgrows its service

Many commercial buildings in Pinellas were wired decades ago for tenants with far smaller loads. A strip center built for offices now holds a restaurant, a salon and a gym. A warehouse that once stored boxes now runs compressors and packaging lines. Typical triggers for an upgrade:

  • A new tenant with a kitchen, salon equipment, medical imaging or machinery
  • Rooftop HVAC replacements with larger units, or added cooling for server rooms
  • Fleet or customer EV charging
  • Main breakers or feeders that trip or run hot during the busiest hours
  • Obsolete gear that cannot get replacement breakers, or equipment damaged by water or storms

Load study first, then design

Before anyone sizes new equipment, we find out how much capacity the building actually uses. Where a year of demand data is available from the utility, the electrical code allows that record to be used to calculate existing load; otherwise we calculate it from the connected equipment. Adding the new loads to that number shows whether the existing service can carry them, whether a feeder or panel change is enough, or whether the service itself has to grow.

Sometimes the answer is smaller than expected: re-balancing panels, replacing one undersized feeder, or adding a panel. When it is a full upgrade, we lay out the options, from a larger single-phase service to new three-phase gear, and the trade-offs of each. Residential and small-building upgrades are on our electrical service upgrade page.

Three-phase, 208V and 480V services

Three-phase power is the backbone of most commercial buildings. We install 208Y/120V services for small and mid-size buildings and 480Y/277V services for larger buildings, warehouses and industrial users, including transformers to step down for receptacle loads. Our commercial work runs from 400-amp services up to switchboards of 4000 amps, with CT metering, multi-tenant meter centers and distribution panels as needed.

EMT conduit runs and LED high-bay fixtures along the roof trusses of a new warehouse
EMT conduit runs and LED high-bay fixtures along the roof trusses of a new warehouse.

Utility coordination and the cutover

A service upgrade involves the power company as much as the electrician. We submit the load information, coordinate the transformer and service drop or lateral, schedule the disconnect and reconnect, and arrange inspections so the utility can energize the new service. The new gear is set and wired before the cutover, so the actual outage is as short as possible. If a business must stay open, a temporary generator can carry the critical loads during the switch.

For tenants downstream of the new service, we re-feed or replace their panels and label everything. Build-out work that follows an upgrade is covered under build-outs and tenant improvements, and large-scale work under commercial electrical construction.

Who does the work

Keywest Lights & Electric is a woman-owned, Florida-licensed electrical contractor (EC13014717) at 6248 Seminole Blvd, Seminole FL 33772, working since 2010 for owners, property managers, general contractors and government agencies. We take on projects up to $2 million and carry bonding capacity up to $1 million. Our workmanship warranty is 2 years, or 5 years for Member Care Plan members. Engineers and GCs can send drawings and bid invitations to proposals@keywestlights.com.

Adding a generator with a service upgrade: a large standby generator often goes in alongside new service equipment or switchgear, and planning both together avoids rework. We install generators of any size, including 150 kW, 250 kW and up, with service-entrance rated transfer switches where the design calls for them. See commercial generator installation and our commercial maintenance contracts.

Apartment and multifamily service upgrades, including house panels and meter stacks, are also described on apartment and multifamily electrical.

Start with all of our electrical services for the basics. Other commercial services: our church electrical work overview.

Commercial electrical service upgrade in Tampa Bay when a building outgrows its service

A commercial electrical service upgrade in Tampa Bay starts with a load study, then a design for the three-phase service the building actually needs. The cutover is planned around the tenant, and the path from the gear to the utility point already described here is walked before a size is promised.

Commercial service upgrade FAQ

How do I know if my building needs a service upgrade? Common signs are a main breaker that trips under load, panels with no spaces left, equipment the utility or engineer says the service cannot carry, or a new tenant whose equipment list is bigger than the old one. We start with a load study, using the building’s demand records or a calculation, to see how much capacity is really left.

Can we go from single-phase to three-phase power? Often, yes, but it depends on what the utility has available at your site. Three-phase service is needed for many commercial kitchens, large HVAC units, motors and machinery. We request the available service from the utility, then design the change, including the new service equipment and any panels that have to be replaced or re-fed.

What is the difference between 208V and 480V service? Both are three-phase. 208Y/120V is common in small commercial buildings because it serves standard 120V receptacles directly. 480Y/277V is used in larger buildings and warehouses because it carries big loads with smaller conductors and runs 277V lighting; transformers step it down for 120V receptacles. The right choice depends on the building, the equipment and what the utility offers.

How long will the power be off during the cutover? We keep the outage as short as possible by building the new equipment ahead of time and scheduling the cutover with the utility, usually at night or on a weekend. Where the business cannot be without power, we can plan a temporary generator to carry key loads during the switch.

Do commercial service upgrades need engineered drawings? Larger services and new switchgear usually do, and we handle the permit and power company review whenever new wiring is involved. For smaller upgrades the requirements vary by location. We tell you early what your project will need and can coordinate with an engineer.

Need more power for your building? Call (727) 476-7079, request service online, or send plans to proposals@keywestlights.com.

Related: Commercial electrician · Electrical service upgrade · Warehouse and industrial electrical · EV charger installation · commercial EV charging · Generator installation · Commercial generators · Commercial maintenance