Panel Upgrade in Pinellas Park, FL

Panel and breaker box replacement for Pinellas Park homes and businesses, from a licensed electrician about 5½ miles away at 6248 Seminole Blvd. We pull the City of Pinellas Park or Pinellas County permit, coordinate with Duke Energy, and give you an itemized quote after a site visit. EC#13014717, local since 2010.

Call (727) 476-7079 or request a panel visit. Office 7 AM–5 PM, weekend service, 24/7 emergency calls.

Panel replacement by Keywest Lights & Electric: new load center with main breaker wired and ready for its cover — A new load center, wired and ready for its cover.

Pinellas Park homes: solid block houses, aging panels

Pinellas Park has about 53,600 residents, and its median home was built in 1978 (Census ACS 2020–2024). Most of the neighborhoods off 66th Street, 70th Avenue, Park Boulevard and Belcher Road are concrete-block homes from the 1960s through the ’80s. The walls will outlast all of us, but the electrical panels inside them weren’t built to last that long. Here’s what we find most often:

Original panels at 40 to 60 years old, with worn breakers that trip under normal load or don’t trip when they should.
Federal Pacific (Stab-Lok) and Zinsco panels. Both have well-documented breaker reliability concerns, and Florida insurers commonly flag them on a 4-point inspection. More on FPE & Zinsco →
Small services, often 100 to 150 amps, that were sized before central AC, pool equipment and EV charging.
Exterior panels with rust and corrosion from years of Florida humidity and wind-driven rain.
Full panels with doubled-up breakers after years of add-ons like a converted garage, a second AC or a workshop.
No surge protection, in a county that sees heavy summer lightning.

Signs your Pinellas Park panel needs attention

Breakers that trip often, or feel warm or buzz
Lights that dim when the AC or another big appliance starts
A burning or hot-plastic smell near the panel (turn off the main if it’s safe and call us right away; we take emergency calls 24/7)
Rust, water stains or a cover that won’t close
A home inspector or insurance agent has flagged it
You’re planning an EV charger, addition, pool or kitchen remodel

Breaker replacement or a full panel upgrade?

If one breaker is worn out and the panel itself is a sound, current brand with clean bus bars and room to spare, we can often replace just the breaker or add the AFCI/GFCI protection the home needs. We recommend a full panel upgrade when:

The panel is Federal Pacific, Zinsco or another brand where replacement breakers don’t fix the underlying risk
The bus bars are burned, pitted or corroded
Replacement breakers are obsolete or hard to find
There’s no room for the circuits you need

We’ll show you what we see, with photos, and let you decide. If a breaker trips because something on the circuit is faulty, we’ll find that too. See outlet repair & installation.

Panels for Pinellas Park shops, warehouses and flex spaces

Pinellas Park is one of the county’s busiest commercial and light-industrial areas, along US-19, Park Boulevard, 49th Street and the Gateway area to the north. Business owners call us when:

New equipment needs more circuits than the existing panel has, like a compressor, a lift, a welder or a commercial kitchen line
A panel or subpanel is overheating or tripping and taking down production
A new tenant is moving in and the space needs a panel, a subpanel or a service upgrade
An insurance or fire inspection calls out the electrical equipment

We assess the existing service and panel capacity, add subpanels or replace panels as needed, and handle the permit and any Duke Energy coordination. To keep you open, we can schedule shutdowns for nights or weekends. See commercial electrical service and build-outs & tenant improvements.

Panel upgrade or service upgrade?

A new panel replaces the box and breakers but doesn’t add capacity by itself. If you’re adding major loads, we run a load calculation first. Sometimes a new panel on the existing service is all you need. Sometimes you also need a service upgrade, with a larger meter base and service conductors coordinated with Duke Energy. We’ll show you the numbers and tell you which it is.

Planning an EV? See EV charger installation. Want to monitor and control every circuit from your phone? A SPAN smart panel in Pinellas Park replaces your panel entirely. We’re a SPAN Authorized Installer with 20 SPAN installs. Solar and batteries are installed by our licensed partner installers; we handle the electrical work and manage the project.

Permits: Pinellas Park, Kenneth City or Pinellas County?

A Pinellas Park mailing address doesn’t always mean you’re inside city limits.

Inside the City of Pinellas Park: City of Pinellas Park Building Development division, 6051 78th Ave N.
Kenneth City, Lealman, parts of the Gateway area and other unincorporated pockets with Pinellas Park or St. Petersburg mailing addresses: Pinellas County.
Utility: Duke Energy Florida. We schedule the disconnect and reconnect when the meter has to be pulled.

Give us the address and we’ll confirm the right office. A panel replacement always needs a permit. Unpermitted panel work can cause trouble with insurance claims and when you sell.

What a Pinellas Park panel upgrade includes

Site visit. Panel, meter, grounding and bonding, wiring at the panel, and what you plan to add.
Itemized quote after the site visit. Every part of the job on its own line. No panel prices over the phone.
Permit and Duke Energy coordination.
Installation, usually in one day for a home. Power is off for part of the day. Every circuit is tested and labeled on a printed directory.
Whole-house surge protection at the panel for homes. The electrical code adopted in Florida requires it when a home’s service equipment is replaced.
Inspection. We schedule it and meet the inspector.

See our Good and Best panel options.

Hurricane season notes for this area

October is still hurricane season on the Gulf coast. For planned electrical work we keep the advice practical:

Standby generators need a listed transfer switch ahead of the panel. Portable-generator interlocks are a different product and are not installed in a SPAN Panel. See generator installation and hookups.
Whole-house surge protection is required by Florida’s adopted electrical code whenever a home’s service equipment is replaced, and it’s a smart add-on before storm season even when you’re not upgrading. See whole-house surge protection.
After a storm: do a visual check before restoring power if the house took on water, if you smell burning, or if the meter can or panel was submerged or damaged. Call us for a post-storm inspection rather than flipping the main back on and hoping. Emergency calls are answered 24/7; we do not promise a response time.
Permits: generator hookups, panel and service work still need the correct city or county permit. We pull those when we do the work.

Warranty, financing and scheduling

3-year workmanship warranty, extended to 5 years for Member Care Plan members.
Financing available through Acorn Finance, subject to credit approval. Check your options without affecting your credit score. Ask us and we’ll include the financing link with your itemized quote.
Hours: office 7 AM–5 PM, weekend service, and 24/7 emergency calls.

Why Pinellas Park calls Keywest Lights & Electric

Close by, at 6248 Seminole Blvd, Seminole, FL 33772
Licensed electrical contractor, EC#13014717, in business since 2010
Residential and commercial, bondable to $1M, with projects up to $2M
Woman-owned, family-run business and Home Depot preferred contractor

Pinellas Park panel upgrade FAQ

How much does a panel upgrade cost in Pinellas Park? It depends on the panel, your service size, the condition of the meter base and grounding, any code corrections, and whether it’s a City of Pinellas Park or Pinellas County permit. We give you an itemized quote after a site visit.

How long will my power be off? Most home panel replacements are done in one day, with the power off for part of it. For businesses, we can schedule the shutdown for a night or weekend.

Do I need a permit to replace a panel in Pinellas Park? Yes. Inside city limits it’s the City of Pinellas Park Building Development division. Kenneth City and unincorporated addresses go through Pinellas County. We pull it either way.

My insurer flagged my Federal Pacific panel. What now? Send us the inspection report. We’ll schedule a site visit, give you an itemized quote, and pull the permit once you approve it. After the final inspection we can give you the documents your insurer asks for.

Can you add a subpanel for my shop equipment? Yes. We check your service capacity first, then add a subpanel or upgrade the panel or service as needed, with the permit included.

Will a new panel let me add an EV charger? Often, yes. We run a load calculation to see whether your service can carry it, and explain the options if it can’t.

Pinellas Park homes and businesses: call (727) 476-7079 or request a site visit.

ALWAYS OPEN! We work 24/7

Electrical Panel Upgrades in Pinellas Park, FL