Indian Shores is a narrow strip of Gulf Boulevard, home to the Seaside Seabird Sanctuary and a long row of mid-rise condos, with single-family homes along the Intracoastal. Most panel jobs here start with one of three things: a condo renovation that needs circuits the unit panel can’t give, a 4-point inspection that flagged an early-1980s panel, or equipment that sat in Helene’s or Milton’s saltwater in 2024. We’re about 3 miles away in Seminole. We pull the Town of Indian Shores permit and coordinate with your association.
Call (727) 476-7079 or request a panel visit. Office 7 AM–5 PM, weekend service, 24/7 emergency calls.
Condo unit panels on Gulf Boulevard
Most of the town’s roughly 1,200 residents (Census ACS 2020–2024) live in condo buildings. Inside a typical unit, the panel and branch wiring belong to the owner, while the meter bank, feeders and electrical rooms belong to the association. Here’s how a unit panel job usually goes:
- We read your building’s rules first, including contractor insurance, working hours, elevator use and who has to sign off.
- We size the new panel for your renovation, whether that’s an induction range, a second bath, a tankless heater or new kitchen circuits, and confirm the feeder can support it.
- We coordinate the feeder shutoff with your property manager so neighbors aren’t surprised.
- We submit the specs a board asks for, then pull the town permit.
If you rent the unit short-term, we can work around your booking calendar.
Bay-side homes
The median home in town was built in 1981. Along the Intracoastal streets, we usually find:
- Original Federal Pacific Stab-Lok or Zinsco panels, which insurers and 4-point inspectors rarely accept. More on FPE & Zinsco →
- Meter cans and exterior panels rusting from the inside out after decades of Gulf Boulevard air
- Low-mounted equipment in homes built at grade, where storm surge can reach it
- Outdoor, balcony and pool circuits added over the years that now overload the panel
After the 2024 storms
If your panel or breakers sat in saltwater during Helene or Milton, plan to replace them, even if everything “still works.” Salt keeps corroding bus bars and breaker mechanisms after the water’s gone, and a breaker that won’t trip is a fire risk you can’t see.
When a panel replacement is part of a storm repair or a major remodel, the town may review it as a substantial improvement or substantial damage project. That can mean raising the meter, main or outdoor equipment above the required flood elevation. We check your flood zone and how the home is built (on a slab, elevated, or with parking under a raised floor) before quoting, and we’ll tell you up front whether it’s a simple swap or a raise-and-rebuild.
Is it time?
- The panel is a Federal Pacific, Zinsco or a fuse box, or the label can’t be read
- There’s rust along the bottom of the panel or around the breakers
- The cover or a breaker feels warm, or the panel buzzes
- Breakers trip when the AC, dryer and kitchen run together
- An insurer, inspector or condo board has written it up
A burning smell or scorched breaker can’t wait for a renovation. Shut off the main if it’s safe and call our emergency line, answered 24/7.
Permit and utility
Inside town limits, electrical permits come from the Town of Indian Shores Building Department, 19305 Gulf Blvd. We pull the permit, meet the inspector and schedule the disconnect and reconnect with Duke Energy Florida when the meter has to come out. Unpermitted panel work can cause trouble with insurance claims and when you sell.
The job, start to finish
- Site visit to open the panel, check grounding and bonding, review flood history and building rules, and talk through what’s coming
- Itemized quote with each part of the job on its own line, never a phone price
- Install, usually one day for a straight swap and longer for relocations or raised equipment, with every circuit labeled on a printed directory
- Surge protection: Florida’s adopted electrical code requires a surge protective device when service equipment is replaced. See whole-house surge protection.
- Town inspection, which we schedule and attend
Compare our Good and Best panel options. For circuit-level control or battery-backup planning, a SPAN smart panel can replace a standard panel. We’re a SPAN Authorized Installer with 20 SPAN installs. The closest SPAN page for this stretch of beach is SPAN in St. Pete Beach & Treasure Island.
Warranty and financing
3-year workmanship warranty, or 5 years for Member Care Plan members. Financing available through Acorn Finance, subject to credit approval. Check your options without affecting your credit score.
About us
- Licensed electrical contractor, EC#13014717, since 2010
- 6248 Seminole Blvd, Seminole, FL 33772, about 3 miles away
- Condo, residential and commercial work; bondable to $1M, with projects up to $2M
- Woman-owned, family-run business and Home Depot preferred contractor
Indian Shores panel upgrade FAQ
Can you replace my condo unit’s panel without affecting the whole building? Usually, yes. Only your unit’s feeder has to be shut off, and we arrange that with the property manager.
My building’s board wants specs before approving the work. Can you provide them? Yes. We provide the panel model, the load calculation and our insurance certificate.
My panel was in saltwater but still works. Do I need a new one? We recommend replacing it. The corrosion continues even after it dries.
Who issues the permit? The Town of Indian Shores Building Department at 19305 Gulf Blvd. We pull it.
How much does it cost? It depends on the panel, the building’s rules, any flood-elevation work and any code corrections. You get an itemized quote after a site visit.
Will my new panel need to be raised? Only if the project triggers a substantial-improvement or substantial-damage review, or the equipment sits below the required elevation. We check before quoting.
Planning a panel upgrade in Indian Shores? Call (727) 476-7079 or request a visit.
Related: Panel Upgrades & Replacement · EV chargers in Indian Shores · Emergency electrician in Indian Shores · SPAN in St. Pete Beach & Treasure Island · Panel upgrades in Redington Shores · Panel upgrades in Indian Rocks Beach · Panel upgrades in Seminole · FPE & Zinsco Replacement · SPAN in Belleair · Generator installation · Whole-house surge protection