Need high bay lighting installation in Seminole? Keywest Lights & Electric installs high bay lighting for Seminole warehouses, garages, gyms and workshops. We are licensed and woman-owned, with our shop on Seminole Blvd, and we plan layouts, circuits, sensors and lift access for a safe, bright floor.
Request high bay lighting installation in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Neighbors also book us for permanent lights under the eaves, a commercial electrician, a home EV charger and a backup generator.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

High bay lighting installation in Seminole: light for tall rooms
Light industrial buildings and large garages sit on the edges of Seminole, near Starkey Road and 113th Street. Their tall ceilings need fixtures that throw light a long way. We install high bay lights that make aisles bright, benches clear and exits visible.
Seminole high-bay settings
- Workshops: benches, saws and tool walls.
- Auto and boat repair: bright bays and low shadows.
- Storage warehouses: racks and dock doors.
- Gyms and studios: steady light and no glare.
- Church halls: tall sanctuaries and fellowship rooms.
- Equipment yards: covered sheds and canopies.
Metal buildings and block shells
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Many light industrial buildings around Seminole are pre-engineered metal or concrete block. In metal buildings, we clamp fixtures to purlins and run conduit along the frame. In block buildings, we anchor to the roof deck or beams. Each method needs the right hardware.
Humid air and coastal salt
Bay air carries moisture and salt, even a mile or two inland. We choose fixtures with sealed housings and coated parts, use stainless hardware and avoid dust traps. Wet or dirty areas get the proper ratings.
Boat and RV storage buildings
Boat and RV storage sheds are tall and long. Lights must show tall hulls and shelves without glare. We use wide optics, even spacing and photocells for entry lights. Outlets for chargers sit at safe heights.
Gyms, courts and studios
Gym lights should not flicker or glare. We choose fixtures with steady output, shield them from view and mount them clear of ball paths. Dimmers help for yoga or classes.
Auto and body shops
Mechanics need bright light at the vehicle and under the hood. We combine high bays with task lights and wall washers. Floors painted light colors reflect light, which helps.
Warehouses and dock areas
Racks cast shadows. We place lights over aisles, add sensors and install lights over dock doors. Emergency fixtures mark exits.
Retrofitting old fixtures
Many older buildings still use metal halide or fluorescent high bays. These take time to warm up and use plenty of power. We replace them with modern fixtures and reuse mounting points when safe.
Permits and inspections
We prepare permits when needed, meet the inspector and test controls. We also show your staff how to use sensors and switches.
Related services
High bay jobs often go with commercial lighting installation, commercial panel replacement and commercial electrical repair. We coordinate them with one crew.
Local reach and service
We are close by on Seminole Blvd. Call or text (727) 476-7079 to plan your high bay project.
Trial layout and light meter checks
Before we commit to every fixture, we can hang one or two, measure the light at the floor and adjust spacing. Real readings beat guesses.
Pole barns and farm-style sheds
Some larger lots near Seminole have pole barns used as workshops or storage. These have exposed rafters and open sides. We run surface conduit, use wet-rated fixtures and add outlets near workbenches.
Dust, sawdust and fiberglass
Woodworking shops fill with dust that clogs fixtures. We choose smooth lenses and fixtures with sealed driver compartments. A yearly wipe-down keeps the output steady.
Floor paint, epoxy and reflected light
A pale epoxy floor can reflect much of the light upward. Dark concrete swallows it. We take floor color into account when we set fixture counts, and we recheck the light after floors are painted.
Mezzanines, lofts and tall shelves
Mezzanines split a tall space. Lights above the mezzanine do not help beneath it. We add lower fixtures under the deck and use brackets that hold up the weight.
Hurricane-season readiness
Before storm season, we check hanger tightness, safety cables and cover seals. After a storm, we look for water in housings and loose supports. A quick inspection prevents falls.
Dim spots behind columns and ducts
Large ducts, columns and sprinkler mains block light. We add fixtures beside them, set brackets on the structure and test the floor for shadows. A walk with a light meter finds weak spots.
Safe cord drops and plug-in fixtures
Some high bays plug into a receptacle on a drop. We use twist-lock plugs, strain relief and cord reels that keep wire above forklift height. Hardwired fixtures avoid snags where traffic is heavy.
Daylight from skylights and roll-up doors
Skylights and open doors flood a space with daylight. A daylight sensor dims the lights nearby, saving energy. We aim sensors away from direct sun and test them at midday.
Controls in plain terms
Staff should not need a manual. We label switches by zone, set sensors to a sensible delay and give each supervisor a one-page card.
Common questions
Can you light a Seminole workshop? Yes.
Can you retrofit old metal halide fixtures? Yes.
Do you handle metal buildings? Yes.
Do you install sensors? Yes.
Can you work around our hours? Yes.
Do you install emergency lights? Yes.
Do you handle permits? Yes.
How soon can you start? Often within a week after the plan.
Our trucks leave the shop on Seminole Blvd and work near the Pinellas Trail, Ulmerton Road, Tyrone Boulevard, Park Boulevard, Lake Seminole Park. We also serve North Redington Beach, Largo, Bay Pines, Treasure Island, West Lealman, Madeira Beach, Indian Rocks Beach and Bardmoor.
Up: High Bay Lighting Installation across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for high bay lighting installation in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
