Need commercial electrical repair in Tampa Bay? Keywest Lights & Electric repairs electrical faults in shops, offices, restaurants and warehouses across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we diagnose the cause, fix it safely and keep downtime short.
Request commercial electrical repair in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial electrical repair in Tampa Bay: get the business running again
When power fails at a business, customers wait and staff stand idle. A tripped main, a dead register, a flickering sign or a warm panel each calls for a quick, correct fix. We find the cause, not just the symptom, so the problem does not return next week.
Faults we repair
- Dead circuits: outlets, lights or equipment without power.
- Tripping breakers: overloads, shorts and ground faults.
- Flickering lights: loose neutrals and failing ballasts.
- Burning smells: hot terminals, melted insulation.
- Panel noise: buzzing or humming from breakers.
- Lost phases: three-phase equipment running poorly.
- Exit and emergency lights: failed units and batteries.
Diagnosis first
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We ask what failed, when and what changed. We test voltage at the panel, at the load and at points between. A clamp meter shows real load. A thermal camera shows hot connections. Many faults trace to loose lugs, corroded splices or a failed device, and finding the exact spot saves labor.
Restaurants and kitchens
Kitchens run on heat and moisture. Walk-in coolers, fryers, hoods and dish machines have dedicated circuits. Faults often show up as a tripped breaker during a rush. We repair circuits, replace worn disconnects and test ground-fault protection, working around service hours when we can.
Offices and retail
Computers, registers and lighting depend on steady power. We trace dead outlets, repair lighting circuits and replace worn receptacles. We also find overloaded power strips and add outlets where they are missing.
Warehouses and light industrial
High-bay lights, dock doors, compressors and conveyors draw large loads. We check three-phase supply, motor starters and contactors. We repair feeders, replace damaged conduit and tighten connections.
Medical and professional offices
Exam rooms, imaging gear and computers need clean power. We work quietly and respect patient privacy, and we avoid interrupting care. Isolated grounding and dedicated circuits are repaired as drawings show.
After-hours and weekend response
Many failures happen at the worst times. We offer scheduled repairs after closing and urgent response when safety is at risk. Call us with the main symptoms, and we will tell you what to do while we travel.
Safe temporary measures
If an outlet or breaker is hot, shut off the circuit and keep people away. Do not reset a breaker that keeps tripping. We can set up temporary power for critical equipment while we complete a repair.
Preventive checks
A short yearly visit can find loose lugs, dirty panels and failing devices before they stop work. We write a plain report, rank the items and fix the urgent ones on the spot.
Permits and inspections
Repairs that replace a panel, a feeder or a disconnect may need a permit. We pull it and meet the inspector. Our workmanship carries a 2-year warranty, or 5 years with the Member Care Plan.
Why choose Keywest Lights & Electric
We are licensed, insured and woman-owned. We arrive on time, explain the cause and clean up. Call or text (727) 476-7079.
What to tell us when you call
Describe the symptoms, the affected area and any recent changes such as new equipment or a storm. Photos help. Tell us how critical the area is, so we can plan temporary power if needed.
Documentation for landlords and insurers
We provide a short written summary of the cause, the repair and the parts used. Property managers and insurers can keep it on file.
Voltage drop and undersized feeders
A long run to a back office or a rooftop unit can lose voltage under load. Motors run hot and lights dim. We measure voltage at the panel and at the far end, then compare with the wire size and length. If the feeder is too small, we recommend a larger conductor or a shorter route.
Neutral faults and shared neutrals
In older buildings, one neutral wire may serve several circuits. A loose or open neutral sends odd voltages to equipment and can damage computers. Flickering and warm outlets are warning signs. We trace the neutral to its source and separate circuits where needed.
Motor circuits, contactors and overloads
Compressors, pumps and fans rely on starters with overload relays. A burnt contactor, a pitted contact or a tripped overload can stop a unit. We test coil voltage, replace worn parts and verify the motor draws normal current.
Data closets, phone rooms and UPS gear
Server closets hold sensitive equipment on a UPS. When a circuit fails, batteries run down quickly. We check dedicated circuits, receptacles and grounding, and label power sources so IT staff know what to protect.
Signs, awnings and storefront power
Illuminated signs rely on transformers, ballasts or drivers on a timer. Water in a sign cabinet or a loose splice behind an awning can kill the sign or trip the circuit. We check the supply, the switch, the photocell and the box.
Common questions
How fast can you respond to a commercial outage? We try to respond within a day, and sooner when safety is at risk.
Can you repair after hours? Yes, by schedule.
Do you repair three-phase equipment? Yes.
Do you handle exit signs? Yes.
Can you do repairs in a restaurant? Yes, and we plan around service times.
Do you give a written report? Yes.
Do you handle permits? Yes, when required.
Do you serve my area? We serve Pinellas, Hillsborough and Pasco counties. Call or text (727) 476-7079 to confirm.
Local pages: commercial electrical repair in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services.
Call or text (727) 476-7079 for commercial electrical repair in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
Related business services: commercial electrician, woman-owned commercial electrician, apartment and multifamily electrical and church and worship electrical.
