Need new home construction electrical in Tierra Verde? Keywest Lights & Electric builds new home construction electrical for a brand-new dwelling on Tierra Verde, from the first temporary service through rough-in, inspections, and trim. We are a licensed, woman-owned contractor working out of Seminole, about 12 miles from the Bayway. This page is a full new house, not a room added onto an older one, and not a commercial shell.
Request new home construction electrical in Tierra Verde
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Homeowners in Tierra Verde also book commercial electrician, commercial generator installation, EV charger installation, generator interlock transfer switch, JellyFish eave lighting, a new breaker panel, battery backup installation, solar installation, emergency electrician visits, 240v outlet installation, aluminum wiring repair, apartment multifamily electrical and appliance wiring hookup.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

New home construction electrical in Tierra Verde follows the carpenter, the roofer, and the inspection calendar
A new house has a sequence. Temporary service keeps the site in power. Rough-in happens when the walls can take cable and boxes. Inspections sit between trades. Trim waits until the painter and the cabinet shop are ready. We work on that calendar, and we do not treat a new house like a weekend service call.
What the package usually includes
- Temporary service at the start, planned so the site is not waiting on a second visit for a common part.
- A full rough-in: panels, cable, boxes, and listed supports, coordinated with the insulator.
- Smoke and carbon devices, and the switching the drawings call for.
- Trim-out of devices, fixtures, and the directory once the finishes can take them.
- A walk at the end with the builder or the owner, plus the copies of the paperwork we filed.
Lots, mail labels and an unincorporated parcel
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A new address on this island may still receive mail labeled St. Petersburg. We use the legal location when we write forms, not the mail city. The lot may sit near a canal or a low yard; we plan burial, a riser, and wet-rated gear where the exposure calls for it, and we do not invent a street name that is not on the drawings.
How this differs from an addition or a remodel
An addition keeps an existing meter and an existing house in use. A remodel opens finished rooms. A new dwelling starts empty, with its own service and its own inspection path. If your project is a guest house on a lot that already has a main house, we will say whether that is a new dwelling or an accessory building and write the scope to match.
Builders, owners and a single point of contact
We want one person who can answer a layout question the same day. A moved island, a changed panel wall, or a late fixture schedule is easier when that call has a name. We stage gear in Seminole, and we plan Bayway trips around the framing and drywall dates rather than arriving to a locked site.
Paperwork
New dwellings need official forms at more than one step. We complete them, we meet the inspections, and we leave the builder the copies. We also will not claim a house count or a model we are not building.
After trim
We walk the panels, the rooms, and the exterior devices. If a circuit, a fixture, or a device we trimmed acts up before the owner has spent a week in the house, call or text (727) 476-7079 and we will keep it on the punch list until it is closed.
Site details a new house on this island actually needs
A temporary pedestal or a temporary pole keeps the site in power. Nail plates protect cable where a plumber might bore a stud. A concrete-encased electrode, a service mast or an underground lateral, and wet-location covers on a canal lot are planned at rough-in, not after the drywall is hung. We cut consistent bore heights, we leave the insulator a clear map of boxes, and we do not bury a junction in a truss bay.
Salt, service gear and a low lot
Service equipment, a riser, and any exterior device on a canal lot need ratings and covers that can take salt and splash. We treat that at rough-in, not as a punch-list surprise after the owner has keys.
Drawings, changes and a fixture schedule that arrives late
If the lighting schedule is still open at rough-in, we can set listed boxes from the architectural set and adjust at trim when the SKU lands, as long as the box type still matches. A late change that moves a wall or a panel is a written change, not a quiet field decision.
What we need from you to bid and to start
A site address, the drawings, the panel location, and the builder’s calendar. If the lot is not yet cleared, we can still review the set. We do not start rough-in until the walls can take the work.
Trusses, insulators and a box that has to stay listed
Once the truss package is set, some fixture boxes hang from a listed support, not from a handy nail. We coordinate with the insulator so a can or a box is not buried or moved after we leave. A late insulation change that covers a junction is a problem we would rather catch on the same visit.
Nearby work we also handle, and what this page is not
Solar, a charger, or a standby generator can be planned into a new house when the drawings call for them, and each of those has its own page. This page stays on the house electrical package. We will not stretch it into a commercial building or a multi-unit stack; those are separate scopes.
Rough-in habits that save a trim fight
We set consistent box heights, we use nail plates at every bored stud a plumber might still cross, and we leave a panel schedule that a trim electrician can read without guessing. A guest-bath fan, a laundry dryer receptacle, a range hood rough, and the weatherproof covers on a canal-facing wall are on the drawing set, not added as a surprise after paint. If a skylight well or a coffered ceiling changes a fixture box, that change is written before drywall, not discovered with a paint sprayer in the room.
Common questions
Is this the same as a home addition or a remodel? No. This page is a brand-new dwelling with its own service. An addition or a remodel keeps an existing house in the picture.
Do you provide temporary service for the site? Yes, as part of the construction sequence, planned so the site has power while the house is being built.
Will you file the electrical paperwork and meet inspections? Yes. We complete the required forms, we meet the inspections, and we leave you the copies.
Can you include a charger, a generator, or solar in the same house? Yes, when the drawings call for them. Those have their own pages, and we will keep the scopes clear so nothing is missed at rough-in.
What do you need to start? The address, the drawings, the panel location, and the builder’s calendar. Call or text (727) 476-7079, or send the form.
Do you work for a custom owner as well as a builder? Yes. We still want one point of contact and a set of drawings, whether the name on the job is a builder or the owner.
The drive from our shop at 6248 Seminole Blvd is about 12 miles. In Tierra Verde we work along the canal lots, the open bay front and the Pinellas Bayway. From here we also reach South Pasadena, Gulfport, St. Pete Beach, St. Petersburg and Treasure Island.
Up: New Home Construction Electrical across Tampa Bay · For everything we do locally, see Tierra Verde electrical service.
Call or text (727) 476-7079 for new home construction electrical in Tierra Verde, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
