Out of power capacity? We handle commercial electrical service upgrade in Redington Beach. Keywest Lights & Electric provides commercial electrical service upgrade in Redington Beach for shops, offices, inns and small buildings that have outgrown their service. We are licensed and woman-owned, we study the load, replace the panel and meter base and coordinate the power provider’s connection.
Request commercial electrical service upgrade in Redington Beach
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Related jobs near Redington Beach: a business standby generator, a car charger circuit, shop and office electrical work and generator installation. Related: jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial electrical service upgrade in Redington Beach: more capacity with less downtime
New equipment, extra tenants and added cooling all pull more power. When breakers trip or voltage sags, a service upgrade may be the cure. We measure first, then replace the right parts and plan outages for slow hours.
What a service upgrade involves
- Load study: what the building draws now and later.
- New main and panel: sized for the new load.
- Meter base and conduit: corrosion-resistant and code-compliant.
- Grounding upgrades: new rod, bonding and clamps.
- Feeder changes: larger wire to subpanels.
- Labeling and drawings: a clear record for the owner.
Load study
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We log the real draw during a busy day and add planned equipment. The result tells us the service size.
Single-phase or three-phase
Some buildings need three-phase for larger motors. We check what the power provider can supply.
The new main and distribution
A larger main breaker, a new panel and clean feeders raise capacity and safety together.
Meter bases and service masts
Rusted bases and leaning masts fail inspection. We replace them with parts rated for the coast.
Coordination with the power provider
We schedule the disconnect, the inspection and the reconnection, so downtime is short.
Planning the outage
We pick a time that hurts least, often a Sunday or early morning, and warn tenants ahead.
Temporary power
A generator or temporary feed can keep coolers and registers alive during the swap.
Grounding and bonding
New services need a fresh ground. We install rods, bond water and gas lines and test the result.
Feeders to tenant panels
Each tenant needs a properly sized feeder. We replace undersized wire and label every breaker.
Surge protection at the service
A surge device at the new panel shields equipment from storms.
Arc-flash labels and drawings
Larger gear needs labels and a one-line drawing. We provide both.
Equipment shopping list
We supply the panel, breakers and wire, and keep the order list so a tenant can add loads.
EV charging and new loads
If chargers or heat pumps are planned, we size the service to carry them. See our commercial EV charging installation page.
Backup power
A transfer switch at the new panel makes a future generator hookup simple.
Phased upgrades
Large buildings can upgrade in stages, one panel at a time, to keep tenants open.
Salt and wind
Gulf wind and salt spray shorten the life of ordinary service gear. We use stainless hardware and rated enclosures.
Flood-zone height
Services in flood zones may need to sit above a set height. We follow the plans and the rule.
Older buildings
Housing in town has a median build year near 1959, so a small commercial building may still run on its first service. We inspect and recommend.
Seasonal demand
Visitor traffic changes loads through the year. We size the service for peak season.
Permits and inspections
The permit file and inspector visits are our responsibility.
Reading your power bill for demand
A bill shows peak demand and usage. We use it to size the new service and spot waste.
Replacing a fused disconnect
Old fused switches wear out and are hard to source. We replace them with a modern breaker-based main.
Interrupting ratings
A new panel must handle the available fault current. We check ratings with the power provider’s data.
Splitting a service for tenants
A building with several tenants can have separate meters and mains. We plan the split and the wire paths.
Overhead to underground conversion
Where a mast is exposed to wind, an underground feed may be safer. We coordinate trenching and conduit.
Phase balancing
Loads spread unevenly can stress one phase. We rebalance circuits at the new panel.
Temporary meter and outage logistics
When a building cannot close, a temporary meter and a generator bridge the gap. We plan the sequence in writing.
Cost control with phased capacity
Some owners buy the larger main now and add feeders later. We design so each step stands alone.
Neutral sizing and harmonic loads
Computers and LED drivers load the neutral wire. We size neutrals generously for offices full of electronics.
Spare spaces and future breakers
We leave open slots and label them, so a tenant can add a circuit without touching the main.
Coastal corrosion on old service gear
Rust inside an old switch or meter can hide until it fails. We open, photograph and show what we find.
Letters for landlords and lenders
Owners often need a short letter stating the new service size and date. We provide one.
Warranty
You get 2 years of workmanship coverage, or 5 years with a Member Care Plan, on everything we install here.
Before we arrive
Tell us who holds the keys, when the space is quiet and where we may park.
Safety first
Leave panels and junction boxes closed, and ring us if a breaker keeps tripping or a plate feels warm.
After the work
Expect photos, a typed circuit list and the signed inspection paper.
Common questions
How long will the power be off? Often a few hours. We schedule it with you and the power provider.
Can you help with three-phase? We check what is available and plan a solution.
Do you handle the permit? Yes. We pull it and meet the inspector.
Our trucks leave the shop on Seminole Blvd, about 2 miles away, and work near Gulf Boulevard and the Intracoastal Waterway. We also serve Indian Shores, Bay Pines, North Redington Beach, Madeira Beach and Redington Shores.
Up: Commercial Electrical Service Upgrade across Tampa Bay · For everything we do locally, see Redington Beach electrical service.
Nearby: Bay Pines · Seminole · Indian Shores · Bear Creek
Call or text (727) 476-7079 for commercial electrical service upgrade in Redington Beach, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
