Is it time for a commercial electrical service upgrade in Seminole? Keywest Lights & Electric upgrades the electrical service of Seminole businesses: new meters, main disconnects, panels and feeders. We are licensed, woman-owned and located on Seminole Blvd. We plan the outage, coordinate with the utility and aim to keep your doors open.
Request commercial electrical service upgrade in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Neighbors also book us for permanent lights under the eaves, a commercial electrician, a home EV charger and a backup generator. Crews here also do commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial electrical service upgrade in Seminole: when capacity runs out
Businesses outgrow their service. A new oven can push a panel to its limit. So can a second air conditioner, an EV charger, a server closet or a tenant with heavier equipment. Warning signs include tripping mains and dimming lights when equipment starts. A hot panel is another sign. So is an inspector or insurer asking for a load study. An upgrade solves the root problem rather than moving loads around.
What the upgrade can include
- Service entrance: new conductors, weatherhead or underground lateral, and meter socket.
- Main disconnect: a larger main breaker or a fusible switch.
- Distribution: new panelboards, subpanels and feeders.
- Grounding: updated grounding electrodes and bonding.
- Surge protection: a service-level protector on the new equipment.
- Labeling: a clear panel schedule and arc-flash labels where required.
Load calculation first
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We start by adding up what you have now and what you plan to add. The study follows the National Electrical Code, as Florida adopts it. It shows the minimum service size. We often recommend some room above the minimum, since adding capacity later costs more than planning for it now.
Single-phase and three-phase
Small offices and shops usually run on single-phase power. Larger HVAC, kitchen or shop equipment may need three-phase. We confirm what is available from the utility, what your equipment needs and what a conversion would involve. If the service type must change, we talk through lead times and costs before we commit.
Coordinating the outage
A service upgrade needs a planned outage. The utility disconnects at the pole or the transformer. We change the equipment. An inspector approves it. Then the utility reconnects. We schedule around your hours, often early in the morning or on a weekend, and tell you the expected downtime. Refrigeration and critical equipment may need a temporary plan, such as a portable generator.
Local conditions
Seminole’s strip centers and plazas often have equipment from the 1970s and 1980s. Humidity and salt air corrode meter sockets, conduits and enclosures. Many sites sit at modest elevation, so we consider flood exposure when we choose where to place new gear. Corrosion-resistant enclosures and sealed fittings are part of our standard approach.
Permits and inspections
Service upgrades get a permit and an inspection. The utility approves them before power returns. We prepare the application and meet the inspector. Delays are common when paperwork is incomplete, so we keep a checklist and tell you what we need from you.
After the upgrade
You get a labeled panel, a copy of the permit and inspection records, and a short walk-through. If you plan future additions, we note the spare capacity. Call or text (727) 476-7079 to schedule a site visit.
Equipment we replace in a service upgrade
- Outside: meter socket, service mast or underground lateral, weatherproof disconnect, ground rods.
- Inside: main distribution panel, branch panelboards, feeder conduit, transfer switch, subpanels.
- Protection: surge device, ground-fault breakers, arc-fault breakers, labeled main.
- Documents: load calculation, riser diagram, permit set, inspection sign-off, utility release.
Choosing equipment that lasts
Gear in coastal Florida should resist corrosion. We suggest stainless or fiberglass enclosures where spray reaches, sealed fittings, and a raised pad for ground-mounted equipment. Interior gear gets labeled breakers, spare spaces for growth and surge protection at the main. Good equipment choices reduce service calls for decades.
Temporary solutions during the outage
Some businesses cannot lose refrigeration or point-of-sale systems for a day. We can arrange a portable generator connection, stage the work in phases, or cut over a critical panel first. Tell us what must stay on, and we will plan around it.
Warning signs it is time
- Tripping: the main breaker trips when the air conditioner and the oven run together.
- Dimming: lights sag when a compressor or motor starts.
- Heat: a warm or discolored panel, hot lugs or a buzzing disconnect.
- Age: rusted gear, cracked meter sockets or fuses in a business that now runs computers.
- Growth: a new tenant, a new kitchen or a planned charger bank.
Who does what on upgrade day
- Utility: de-energizes the line, pulls or sets the meter, restores power after approval.
- Inspector: checks grounding, labeling, clearances, conduit supports and workmanship.
- Our crew: demolition, new equipment, terminations, torque checks, testing, cleanup.
- You: access to the electrical room, a point of contact and a plan for refrigeration.
Common questions
How do I know if my service is too small? Look for tripping mains, hot panels and dimming lights. A load calculation settles the question.
How long is the power off? Often a day or less, depending on the scope. We give you an estimate and plan around your hours.
Can you upgrade to three-phase? Sometimes. It depends on what the utility can provide at your location and what your equipment needs.
Who coordinates with the utility? We do. We handle scheduling, inspection and reconnection requests.
Will I need new equipment inside the building? Often panels and feeders need to be updated along with the service. We tell you what is required in the quote.
Our trucks leave the shop on Seminole Blvd and work near Long Bayou, 113th Street North, the Pinellas Trail, Starkey Road, Bay Pines Boulevard. We also serve Indian Rocks Beach, Ridgecrest, West Lealman, Largo, Redington Beach, Treasure Island, Indian Shores and South Pasadena.
Up: Commercial Electrical Service Upgrade across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for commercial electrical service upgrade in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
