Need a commercial electrical service upgrade in Bay Pines? Keywest Lights & Electric designs and installs a commercial electrical service upgrade in Bay Pines for tenants and owners who have outgrown their power. We are licensed and woman-owned, and we manage the work with the power company and the inspector.
Request commercial electrical service upgrade in Bay Pines
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Related jobs near Bay Pines: a standby generator, JellyFish holiday and event lighting, a car charger circuit and panel upgrades. Nearby neighbors can also see commercial electrical service upgrade in Seminole. We also handle commercial electrician and commercial generator installation. Nearby neighbors can also see commercial electrical service upgrade in Indian Shores, commercial electrical service upgrade in Bear Creek and commercial electrical service upgrade in South Highpoint.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial electrical service upgrade in Bay Pines: when the building needs more power
New ovens, a second HVAC unit, charging stations or a medical device can push a small service past its limit. Warning signs include breakers that trip under normal use, lights that dim when a compressor starts and panels with no free spaces. An upgrade replaces the meter base, the main disconnect and the panel with a service sized for the load you have now and the load you expect.
What an upgrade includes
- Load study: list of the loads and the demand factors.
- New service gear: meter base, main disconnect, panel.
- Feeders: conduit and wire from meter to panels.
- Grounding: new electrode and bonding.
- Coordination: power company disconnect and reconnect.
- Inspection: permit, inspections and final approval.
Sizing the new service
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We total the lighting, receptacles, motors and special loads, then apply the demand rules the code allows. The answer tells us whether a 200 amp, 400 amp or larger service is the right fit. Leaving room for growth costs little compared with a second upgrade five years later.
Single-phase and three-phase service
Many small suites have single-phase power, while shops with large motors may want three-phase. We check which the street offers and what your equipment needs. If the building cannot get three-phase, we look at converters or alternate equipment.
Working with the power company
The power company must cut power and reconnect after inspection. We schedule the visit, confirm the meter work and stay on site. For a business, we plan the outage for a time when it hurts least.
Old gear from the 1970s
With a median build year of 1970 in Bay Pines, many commercial services are older than the people who run the business. Panels may carry brands that are hard to service. Bus bars may show heat damage. Old fuse boxes may still serve small offices. We note which pieces to replace and which can stay.
Coastal considerations
Salt air attacks meter bases and disconnects. We specify stainless or aluminum enclosures where appropriate, add gasketed covers and mount equipment above likely water lines when the site allows. A large share of this community is water, and storm surge is a real risk.
Condos and multi-tenant buildings
Shared meter rooms and risers need coordination with the owner or the association. We map the existing feeders, label every position and plan phases so tenants lose power only briefly.
Phased installation
Some businesses cannot close. We stage the work: set the new gear, pull the feeders, then cut over during a short window. We bring generators for critical equipment when the plan calls for it.
Documents you receive
You get the permit record, a panel schedule, a load summary and test readings. Keep them with the lease or the deed.
Budget and phases
We send a written scope with each part priced separately: gear, labor, permit and utility coordination. If cash is tight, we propose phases that keep the building safe and safe to occupy.
Warranty
Workmanship carries a 2-year warranty, or 5 years with a Member Care Plan. Call or text (727) 476-7079.
Metering, CT cabinets and instrument gear
Larger services may need current transformer cabinets and a meter set by the power company. We confirm the required rating early, so the gear is ordered correctly. A wrong cabinet can delay the project by weeks, and nobody wants to pay for a re-order.
Selective coordination and breaker sizing
In a bigger panel, the main and the branch breakers must work together so that a fault clears at the nearest device. We check ratings, interrupting capacity and sizes, then label the panel with the settings. This keeps one tripped breaker from turning off the whole building.
Conduit routes and wire sizing
A larger feeder takes larger conduit and sometimes parallel runs. We plan bends, pull points and fill so the wire pulls cleanly. Long runs need extra size to limit voltage drop at the far end, which matters for motors and sensitive equipment.
Temporary power during cutover
For clinics, restaurants and shops that cannot close, we can bring a rental generator for the critical loads during the cutover. We run a short test of the temporary hookup before the old service is shut off.
After the new service is live
We test voltage, check phase balance and record the loads. We show your staff the new panel and how to read the labels, then leave the schedule in a sleeve inside the door.
Common questions
How do I know I need a bigger service? Trips, dimming lights and full panels are common signs. A load study confirms it.
Will my business lose power? Briefly, on cutover day. We plan the time with you.
Do you handle the power company? We schedule and coordinate the disconnect and reconnect.
Can you add three-phase? If the street has it, we can plan the service.
How long does an upgrade take? Often one to three days on site, plus lead time for the permit and gear.
How do I start? Call or text (727) 476-7079, or use the form above.
Our trucks leave the shop on Seminole Blvd, about a mile away, and work near Boca Ciega Bay, Bay Pines Boulevard, Seminole Boulevard and Long Bayou. We also serve Bardmoor, Kenneth City, Madeira Beach, Indian Shores and Redington Shores.
Up: Commercial Electrical Service Upgrade across Tampa Bay · For everything we do locally, see Bay Pines electrical service.
Nearby: Madeira Beach · Redington Beach · North Redington Beach · Bardmoor
Call or text (727) 476-7079 for commercial electrical service upgrade in Bay Pines, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
