Solar installation in Lutz often begins with a question city lots rarely raise: house or ground? Plenty of properties here have room in the yard, and roughly eight in ten homes are detached, so both mounting styles are on the table. Keywest Lights & Electric (EC13014717) handles the wiring: service and panel review, trenching coordination for conduit, inverter and rapid shutdown circuits, disconnects and the grid connection. A licensed partner engineers and installs the modules and racking. Add a SPAN smart panel to see what each circuit uses as the sun moves across the day.
Request a solar quote in Lutz
Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.
If you need a related service, we also offer battery backup installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Lutz housing at a glance
Lutz is a census-designated place in northern Hillsborough County with about 27,100 residents and a median age near 41. Census Bureau estimates for 2020-2024 show a median build year of 1990, later than most of the county’s older suburbs. Around a quarter of homes date from the 1980s, about one in six from the 1990s, and close to one in six from the 2010s, with a few added since 2020. Detached houses dominate, and close to eight in ten households own their home.
Ground mount or house mount
Each has strengths:
Our partner weighs shade, setbacks and your plans for the yard. We then design the electrical route either way.
- Ground mount: easy to clean and service, can face due south, and keeps the house envelope untouched. It needs open space and a longer conduit run.
- House mount: shorter wiring path and no yard space used, but it depends on shingle age, framing and how the slopes face.
What solar installation in Lutz means for your panel
Homes from the 1980s and 1990s usually have 150 or 200 amp services. That can be enough, but bus ratings, open breaker slots and the condition of each breaker all matter. We check each one and tell you whether the panel stays, gets a new main breaker, or should be replaced. Newer homes from the 2010s often need only a clean point of connection and proper labeling.
If your house has heavy loads
Pool pumps, well pumps, electric ranges, spa heaters and workshop tools change the math. A variable-speed pump or a timer can shift demand toward midday, when production is strongest. We review those big appliances with you, label their circuits clearly, and suggest wiring changes that let them line up better with sunshine.
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
What happens at the first visit
Plan on roughly an hour, though larger properties can take longer. We photograph the meter base, open the panel, test grounding, measure distances for conduit, and ask about plans such as an addition, an electric vehicle or a future pool. You leave the visit knowing what electrical prep is needed, and our partner leaves with the facts required to design the array.
Long conduit runs, done right
A ground array set well back from the house means conductors travel underground. We size wire for voltage drop, bury conduit at proper depth, add pull boxes where bends stack up, and mark the route so future digging does not hit it. Small details like expansion fittings and sealed entries keep moisture out for years. Where a mower or tractor crosses the route, we add extra depth or protective sleeves.
Storm notes for inland Hillsborough
Hurricane Milton in 2024 brought record-high crests on the Hillsborough River and extreme rain across the bay area, with the National Hurricane Center noting more than 20 inches near St. Petersburg. Inland homes can still take on water from heavy rain. We set inverters and disconnects above likely splash and pooling levels and choose racking hardware rated for high winds.
Our standard runs past code
Inspectors confirm the minimum. We aim higher with torque logs, surge protection at the service, tidy wire management and a posted one-line diagram so anyone opening the panel later understands the system.
Incentive basics
Florida does not charge sales tax on qualifying solar equipment, and the value solar adds to a home is excluded from property tax assessments. Net metering lets excess output earn credit under your provider’s terms. Consult a tax professional; incentives can change.
Warranty
Most electrical contractors back their labor for one year. We back ours for two years, or five with our Member Care Plan. Modules and racking carry the partner’s own warranty.
Start a plan
Our shop is at 6248 Seminole Blvd, about 30 miles from Lutz. Call or text (727) 476-7079, or describe your lot and panel in the form near the top. We also install permanent JellyFish lighting in Lutz and whole-home generators in Lutz.
Lutz solar FAQs
Is a ground mount allowed on my lot? Often, depending on setbacks and any deed rules. Our partner checks both before drawing a layout.
My house is from 1988. Will the panel work? Possibly. We check bus rating, breaker space and branch wiring on the first visit.
Who installs the modules? A licensed partner installs modules and racking. We do the electrical work.
Does solar keep my lights on in an outage? Not by itself. Grid-tied systems shut down for safety unless a battery or similar backup is added.
How far are you from Lutz? About 30 miles, from our Seminole shop.
Related: solar installation across Tampa Bay · SPAN smart panels in Lutz · generators in Lutz · electrician in Lutz · Hillsborough County service area. Nearby: solar in Riverview · solar in Temple Terrace · solar in Brandon · solar in Samoset · solar installation in Bayshore Gardens · solar installation in New Port Richey.
