Is your house due for rewiring in Seminole? Keywest Lights & Electric rewires homes in Seminole, from a few worn circuits to the whole house. We are licensed and woman-owned, with our shop on Seminole Blvd, and we explain each step, protect your rooms and leave the house inspected and labeled.
Request rewiring in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Neighbors also book us for permanent lights under the eaves, a commercial electrician, a home EV charger and a backup generator. We also handle commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Rewiring in Seminole: when a house needs it
Wiring wears out in ways you cannot see. Insulation dries and cracks. Connections loosen. Older cable may be aluminum, cloth-covered or ungrounded. Many houses carry the changes of several owners, with splices in attics and extra outlets on circuits that were never meant for them. A rewire replaces the weak parts with new cable, devices and protection that meet today’s code.
Signs you may need it
- Flickering lights: across a room or the whole house.
- Breakers that trip: more often than they used to.
- Warm outlets: or switches that feel hot to the touch.
- Two-prong outlets: with no ground in most rooms.
- Burning smells: or dark marks around outlets.
- Old cable: cloth, aluminum or brittle insulation in the attic.
- Insurance letters: asking for an inspection or an update.
A partial or full rewire
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Not every house needs everything replaced. After a survey, we may suggest replacing the worst circuits first, such as the kitchen, bath and attic runs. In other houses, the wiring is so mixed that a full rewire is the cleanest answer. We give you both options with a clear scope, so you can choose based on risk, budget and timing.
How we work in a lived-in home
We protect floors, cover furniture and keep dust under control. Cable is fished through attics, crawl spaces and wall cavities, using small openings in drywall only where we must. We shut off one area at a time, so power stays on in the rest of the house. Most families can stay home during the work, and we keep the schedule clear.
New panel and circuits
A rewire is the best time to upgrade the panel and service. We size the panel from a load calculation, add circuits for the kitchen, laundry, bathrooms and air conditioning, and install ground-fault and arc-fault protection where the code asks. We label every breaker and leave a printed directory. You also get room for later needs, such as an EV charger or a generator inlet.
Walls, ceilings and patching
Opening walls is the part owners worry about most. We plan routes through closets, attics and soffits to limit damage. Where we must cut, we make clean, small openings and leave them ready for a drywall crew. Some owners hire their own painter or patcher, and others ask us to coordinate. Either way, we tell you what to expect before work starts.
Seminole’s housing
The median Seminole home dates to 1979, and about 45% were built in the 1960s and 1970s. Those homes sit at the age where original wiring begins to show wear. Around 13% of housing is manufactured homes, which have their own wiring rules. We check the type of home first, then plan a rewire that fits the structure.
Permit, inspection and records
A rewire needs a permit and several inspections. We handle the paperwork, schedule each visit and meet the inspector. After the final, we give you a copy of the record and a letter for your insurer. Our work carries a 2-year warranty, or 5 years with a Member Care Plan. Call or text (727) 476-7079.
What the survey includes
Before we quote, we visit the house for a full survey. We open the panel, test outlets, peek into the attic and crawl space and trace the main runs. We look at the age of the cable, how it is supported, whether it is grounded and how many splices are hidden above the ceiling. The survey takes a few hours in a typical home and ends with a written scope. You can compare it with other quotes, and you can ask questions about any line.
Materials and methods
New work uses copper cable with a ground wire, boxes sized for the number of wires and devices rated for the load. We use metal or plastic conduit where cable needs protection, such as in garages and on exterior walls. Where a ceiling is exposed, we run cable neatly along joists. Every circuit gets a clear label, and every box gets a cover. This tidy finish makes later work easier for any electrician.
Safety devices built in
Modern code asks for protection that older houses never had. Arc-fault breakers detect dangerous sparking in cables and cords. Ground-fault devices guard kitchens, baths, garages and outdoor outlets. Smoke and carbon monoxide alarms are linked, so one alarm sounds all of them. Surge protection at the panel guards electronics. We install these as part of the rewire and test each one before we leave.
Timing and phases
The order of work matters. We rough in new cable in the attic and walls, then the inspector checks it before anything is closed. After patching and paint, we install devices and fixtures, and the final inspection follows. If you want to stage the project, we can start with the riskiest circuits and finish the rest later. A clear schedule lets you plan where to sleep, cook and work during each phase.
Common questions
How do I know if my house needs rewiring? Warning signs include frequent trips, warm outlets and old cable. A survey will tell you for sure.
How long does a rewire take? Many houses take several days to a couple of weeks, depending on size.
Can I stay in the house? Usually yes. We work in sections and restore power each day.
Will you damage my walls? We use attics and crawl spaces first and keep openings small.
Do you handle the permit? Yes. We pull it and schedule inspections.
Our trucks leave the shop on Seminole Blvd and work near Ulmerton Road, the Pinellas Trail, Tyrone Boulevard, 113th Street North, Boca Ciega Bay. We also serve Redington Beach, North Redington Beach, South Pasadena, Belleair Bluffs, Redington Shores, Kenneth City, Indian Rocks Beach and Treasure Island.
Up: Rewiring across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for rewiring in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
