Searching for mobile home electrical repair in Redington Beach? Keywest Lights & Electric provides mobile home electrical repair in Redington Beach for manufactured homes, with panel, feeder, outlet and grounding service. We are licensed and woman-owned, we know the differences in these systems and repair them to code.
Request mobile home electrical repair in Redington Beach
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Our Redington Beach pages cover commercial generator installation, commercial electrical service, backup generator hookups and home EV charging too. Crews here also do jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Mobile home electrical repair in Redington Beach: wiring built a little differently
Manufactured homes are wired in a factory and then moved to a lot. The panel, the feeder and the grounding are set up differently from a site-built house. We know those differences, so repairs are done the right way.
Common mobile home electrical problems
- Outlets that do not work: loose back-stab connections.
- Tripping breakers: overloaded or aging circuits.
- Flickering lights: loose neutrals or splices.
- Warm outlets or switches: failed connections.
- Rusted panels: moisture and age.
- Loose or damaged feeders: movement and weather.
How manufactured home wiring differs
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
The branch circuits are often run in thin cable with connections that were made quickly on the line. Many use push-in connections that loosen over time. Panel locations and grounding differ, too.
The feeder to the home
Power travels from the pole or pedestal to the home through a feeder. We check the feeder for damage, the connections at both ends and the protection at the first disconnect.
The main panel and subpanel
Some homes have a main on a pole and a subpanel inside. We check that the neutral and ground are separated where required and that each breaker is the right size.
Grounding and bonding
A manufactured home needs a proper ground and a bond to its frame. We test the grounding electrode and the equipment grounds, and we correct anything missing or loose.
Aluminum wire in older units
Some older manufactured homes used aluminum branch wire. We use compatible connectors and pigtails and look for signs of heat at each connection.
Outlet and switch replacement
Worn outlets and switches are a common cause of problems. We replace them with new devices, using screw terminals instead of push-in holes.
Ground-fault and arc-fault protection
Kitchens, baths, exteriors and laundry areas need ground-fault protection, and bedrooms may need arc-fault protection. We add the right breakers and outlets.
Water heaters and appliances
Electric water heaters and ranges draw heavy current. We check the wire size, the breaker and the connection, and replace anything undersized or hot.
Under-skirt and crawl space wiring
Wiring below the floor can be chewed by pests or damaged by moisture. We inspect accessible runs and replace damaged lengths with outdoor-rated cable.
Vents, stacks and openings
Holes for vents and cable can let in rain. We seal each opening we touch and tell you about other drips we notice along the way.
Salt air and humidity
Bay and Gulf air keep everything damp and salty, which eats bare metal fast. Under the floor and on the exterior, we use boxes and covers made to resist corrosion.
Older units and insurance
Insurers may ask for an inspection of an older manufactured home. We provide a written report of what we found and what we corrected.
Park rules and owner approvals
Some communities have rules on who may work on a home and where a meter sits. We follow the rules and coordinate with the manager.
Electric heat and large loads
Since electric heat is the norm here, a panel carries heavy current for months at a time. We read its rating and the wire at each large appliance.
Seasonal use
Winter owners often arrive to a home that has sat closed. We can repair circuits ahead of your trip so the place is ready when you walk in.
Aging in place
Many residents are retirees, and small changes help: extra outlets by the bed, lit switches in the hall and brighter lights where it is dark.
Smoke and carbon monoxide alarms
We can test and replace alarms where required. Working alarms are important in any home, and a small home with one exit needs them even more.
Adding circuits and outlets
A manufactured home may lack outlets in the places you need them. We add circuits where the panel has room, and tell you when it does not.
Permits and inspection
Panel, feeder and service work need a permit and an inspection. We handle the paperwork and the scheduling.
Surge protection
Manufactured homes often benefit from a whole-home surge protector at the panel. We can install one at the same visit.
Frames, skirts and pedestals
The frame, skirting and outdoor pedestal all affect the electrical system. We check clamps and bonds at each point and replace any that are corroded.
Peeling cable jackets
Light-gauge cable under a floor can dry out and crack. We replace damaged lengths with cable rated for the location.
Undersized breakers and wire
A breaker that is too large for its wire can let the wire overheat. We test every circuit and match each breaker to the wire it protects.
Tripping with a window unit
Window air conditioners can overload a thin circuit. We check the load and add a circuit if the panel allows.
Leaning poles and pedestals
A pedestal that leans stresses the feeder. We check the base and brace it, or refer the work to the park if it belongs to them.
Wet insulation and hidden damage
Water in a wall cavity can hide a bad splice. We trace the circuit and open the wall only where needed.
Warranty
We guarantee our labor for 2 years; add a Member Care Plan and that grows to 5 years.
Before we arrive
Clear access to the panel and note which outlets or lights act up. Tell us about any recent storm or flood.
Safety first
A circuit that trips often should not carry a heater. If an outlet is warm to the touch, use the breaker to turn it off when that is safe, and then phone us.
After the visit
We leave a note with what we tested, what we replaced and what we suggest for later.
Common questions
Are mobile homes wired differently? Yes. The panel, feeder and grounding are set up in a different way, and we repair them to match.
Why do my outlets stop working? Push-in connections can loosen over time. We replace them with firm screw connections.
Can you add outlets to a manufactured home? Often yes, as long as the panel has room. We check first.
Our trucks leave the shop on Seminole Blvd, about 2 miles away, and work near the Intracoastal Waterway and Gulf Boulevard. We also serve Madeira Beach, North Redington Beach, Indian Shores, Bay Pines and Redington Shores.
Up: Mobile Home Electrical Repair across Tampa Bay · For everything we do locally, see Redington Beach electrical service.
Call or text (727) 476-7079 for mobile home electrical repair in Redington Beach, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
