Need mobile home electrical repair in Tampa Bay? Keywest Lights & Electric repairs electrical systems in mobile and manufactured homes across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we know how these homes are wired, grounded and supported.
Request mobile home electrical repair in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Mobile home electrical repair in Tampa Bay: wiring that fits a manufactured home
Mobile and manufactured homes are built in a factory and wired to a federal standard. They also move, settle and flex with weather. Their wiring uses thin walls, short runs and often aluminum feeders. Repairs must respect that design. A general fix that works in a block house can fail here, so we use methods made for these homes.
Common problems in manufactured homes
- Aluminum branch wiring: loose connections that run hot.
- Undersized service: old homes with low amp ratings.
- Poor grounding: missing or corroded ground rods.
- Tripping breakers: overloaded circuits and old panels.
- Damaged underbelly wiring: rodents, water and sagging cables.
- Dead outlets: broken wires inside thin walls.
- Weatherhead and pole issues: worn masts and meter pedestals.
Feeder and service differences
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Many mobile homes are fed by a service pole or a pedestal outside, with a feeder cable that runs to the home. Some older homes use four-wire feeders, and others use three-wire feeders that no longer meet current rules. We check the type and bring the feed up to current standards when needed.
Grounding and bonding
Metal frames, skirting and ducts must be bonded so a fault has a path back to the panel. We test the grounding electrode, replace corroded clamps and fix broken bonds. Good grounding is one of the most important safety steps in a manufactured home.
Panels and breakers
Older mobile home panels may have problems such as worn breakers and loose bus connections. We test them, replace worn parts or install a new panel with the right rating. We also add surge protection where it helps.
Underfloor and ceiling wiring
Wires beneath the floor face moisture, pests and sagging. In the ceiling, cable passes through thin cavities, near insulation and fixtures. We trace faults, repair splices in proper boxes and protect cable with conduit or supports. Any damaged jacket is replaced instead of taped.
Air conditioning and water heater circuits
Cooling and hot water are big loads. We check the wire size, the breaker and the disconnect for each. Where loose lugs or heat marks appear, we repair them. A tune-up of these circuits helps prevent summer outages.
Smoke alarms and safety devices
Manufactured homes should have working smoke and carbon monoxide alarms. We install and test them, and add ground-fault and arc-fault protection where required. These devices catch problems early in a lightweight structure.
Storm and wind issues
High winds can shift a home on its piers, stress the feeder and tear service masts. After a storm, we inspect for stretched cable, loose connections and water in boxes. We repair or replace damaged parts and report what we find.
Working with park managers
Many manufactured homes sit in communities with rules about work hours and meter changes. We coordinate with the manager and the power company, schedule outages and keep neighbors informed. A clear plan avoids surprises.
Permits and inspections
Panel changes, feeder repairs and new circuits require a permit. We pull it and meet the inspector. All work is done to current code for manufactured homes, and records are left with you.
Why choose Keywest Lights & Electric
We are licensed, insured and woman-owned. We explain problems in plain language and fix them neatly. Our work carries a 2-year warranty, or 5 years with the Member Care Plan. Call or text (727) 476-7079.
What to tell us before we arrive
Tell us the year of the home, the size of the panel and where the problem shows up. If you have a manual or a data plate, keep it handy. Photos of the panel and meter help us bring the right parts. Note any recent roof work, remodeling or pest control, since those can affect wiring.
Replacing aging components
Plastic outlets crack and old light fixtures yellow. Switches wear and wire nuts loosen. We replace aging devices with new ones rated for the load and use proper connectors for aluminum and copper. A full tune-up often takes a morning and improves reliability.
Piers, tie-downs and cable slack
A home that shifts on its piers pulls on the feeder and on conduit at the wall. We leave service loops at the entry, support the cable at proper spacing and check that nothing rubs on a steel frame. A stretched cable gets replaced, not stretched again.
Wet wall plates and bathroom circuits
Bath fans, vanity lights and outlets near tubs see steam all day. We replace brittle plates, test ground-fault outlets and look for rust at metal boxes. Water that drips from a plumbing leak can find a wire in minutes, so we check pipes above ceilings too.
Heat tape, water lines and skirting lights
Cold snaps are rare but real. Heat tape on water lines, a pump house or a shed light each need a safe supply. We check their plugs, thermostats and cords, and replace worn ones before they cause a spark.
Common questions
Can any electrician work on a mobile home? The work should be done by a licensed electrician who knows manufactured home methods.
Is aluminum wiring dangerous? It can be if connections are loose or the wrong parts are used. We inspect and repair it properly.
Do I need a permit for a panel change? Yes. We pull the permit and schedule the inspection.
Can you upgrade my service amps? Yes, when the feeder, panel and meter base can handle it.
Why do my breakers keep tripping? Overloads, loose wires or worn breakers are common causes. We find the cause and repair it.
Can you fix wiring under the floor? Yes. We trace faults, repair cable and protect it from moisture and pests.
Do you work in parks? Yes. We coordinate with managers and the power company.
Do you serve my area? We serve Pinellas, Hillsborough and Pasco counties. Call or text (727) 476-7079 to confirm.
Local pages: mobile home electrical repair in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services. Related: mobile home electrical repair.
Call or text (727) 476-7079 for mobile home electrical repair in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
