Planning a kitchen? Ask about kitchen remodel electrical in Seminole. Keywest Lights & Electric wires kitchen remodels in Seminole: new circuits, under-cabinet and recessed lights, island outlets and appliance connections. We are licensed and woman-owned, with our shop on Seminole Blvd, and we work from your cabinet plan so outlets and lights land where you need them.
Request kitchen remodel electrical in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Besides this, we do commercial electrical work, generator hookups, eave lighting and charger circuits around Seminole. Crews here also do commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Kitchen remodel electrical in Seminole: plan it before the cabinets
A kitchen is the hardest-working room for electricity. Refrigerators, ranges, dishwashers, disposals, microwaves and small appliances all draw power at the same time. Code asks for specific circuits and protection, and a good layout adds comfort. We review your plan, mark every circuit and make changes before walls are opened.
Circuits a kitchen needs
- Small-appliance circuits: two or more for counter outlets.
- Refrigerator: a dedicated circuit for steady power.
- Dishwasher and disposal: their own circuits as the plan requires.
- Microwave: a dedicated circuit when it is built in.
- Range or cooktop: a 240-volt circuit sized to the nameplate.
- Lighting: a separate circuit from outlets, with dimmers.
Counter and island outlets
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Outlets must be spaced so no point on a counter is far from one. Islands and peninsulas need outlets too, placed on the side or in a pop-up unit. We plan these with your cabinet maker so the box does not land behind a drawer. Counter outlets also need ground-fault protection, which we install and label.
Lighting layers
A kitchen needs several lighting layers: general light from the ceiling, task light under cabinets, accent light over the island and soft light in toe-kicks or glass cabinets. We install recessed lights, pendants, strip lights and dimmers, and we place switches where you reach for them. Good lighting makes a modest kitchen feel larger.
Moving appliances
Swapping a gas range for an induction one, or moving a refrigerator, changes the wiring. Induction ranges need a 240-volt circuit and a heavier cable. A new location may need a longer run through the attic or slab. We open the smallest area possible and patch to a state ready for the drywall crew.
Working with designers and contractors
We coordinate with kitchen designers, cabinet installers, plumbers and countertop crews. Our rough-in comes before drywall, and trim comes after paint and cabinets. We attend a short walk-through before closing walls to confirm every box. This avoids the cost of repairs after cabinets are in.
Older Seminole kitchens
The median home in Seminole dates to 1979, and many kitchens still have two small-appliance circuits at most, old outlets and a single overhead light. Some have aluminum branch wiring or no ground-fault protection. We check the panel and the wiring that remains, then recommend repairs that make the new kitchen safe.
Inspection and finish
A remodel with new circuits needs a permit and inspection. We schedule the rough-in and final. At the end, we test each outlet, appliance circuit and light, label the panel and show you how to reset ground-fault devices. Call or text (727) 476-7079.
Appliance details that trip up remodels
Appliance specs change from model to model. A built-in oven may need a different cable than a freestanding range. A microwave drawer may need a specific outlet position. A new refrigerator with an ice maker may need a nearby water line and a place for the plug. We ask for model numbers early and check installation sheets, so the wiring matches the appliance rather than the other way around.
Ventilation and range hoods
A good range hood moves air and grease outdoors. It needs its own circuit when it is large, a path for the duct and sometimes make-up air. We install the circuit, coordinate with the HVAC or carpentry crew and test that the hood runs on every speed. We also place the switch where you can reach it while cooking, not behind a pot.
Dimmers, smart switches and scenes
Kitchens benefit from dimmers on every light layer. A bright setting for cooking and a soft one for dinner make the room more useful. Smart switches can group lights into scenes and turn them on from a phone. We confirm that the bulbs, drivers and switches work together, and we leave a simple card that explains what each button does.
Protection for wet areas
Kitchens have sinks, dishwashers and water lines near electrical devices. Ground-fault protection reduces the risk of shock, and arc-fault protection reduces the risk of fire from damaged cords or loose connections. We install protection as required, label it at the panel and test it, so you know it works. We also keep outlets away from the sink where the layout allows.
Islands, peninsulas and breakfast bars
An island is a gathering spot, so it needs outlets that guests can reach, often one on each long side or in a pop-up that hides when not used. Pendant lights above need a switch and a box that carries their weight. We run cable under the slab or through a chase from the nearest wall, which should be planned before cabinets are set.
Cabinet lighting and glass doors
Glass-front cabinets, open shelves and toe-kick strips add depth to a kitchen. Low-voltage tape light needs a driver hidden near the cabinet and a clear path for wire. We place drivers where they stay cool and are easy to reach, and we run a switch or dimmer that suits the layout.
Final testing and walk-through
Before we leave, we test every outlet, ground-fault device, hood fan, disposal and appliance connection with the new appliances in place. We show you which breaker feeds what and how to reset protection devices. If the inspector finds an item, we correct it quickly.
Common questions
How many circuits does a kitchen need? It depends on the appliances, but a remodel often needs several, including counter outlets, a refrigerator and a range.
Can you add an outlet on an island? Yes. We plan it with the cabinet layout so it meets code and fits the design.
Do I need a permit? Yes, for new circuits and most changes. We pull it for you.
Can you install under-cabinet lights? Yes. We offer hardwired and plug-in options with dimmers.
When do you start? At rough-in, before drywall, and again at trim after cabinets and paint.
Our trucks leave the shop on Seminole Blvd and work near Lake Seminole, Walsingham Road, Ulmerton Road, Boca Ciega Bay, Largo Road. We also serve Madeira Beach, Indian Shores, Largo, Belleair Bluffs, West Lealman, South Pasadena, Bay Pines and North Redington Beach.
Up: Kitchen Remodel Electrical across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for kitchen remodel electrical in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
