Need emergency exit lighting in Redington Beach? Keywest Lights & Electric provides emergency exit lighting in Redington Beach for businesses, associations and rental buildings. We are licensed and woman-owned, we install, test and replace exit signs and battery lights, and we keep a log of every test.
Request emergency exit lighting in Redington Beach
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Besides this, our Redington Beach crew handles commercial electrical service, home EV charging, commercial generator installation and backup generator hookups. Also available here: jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Emergency exit lighting in Redington Beach: clear exits in the dark
When power fails, the way out must still be clear. Exit signs and battery lights are small, but they are among the most important lights in a building. We install them, test them and keep records.
What the system includes
- Exit signs: lit signs over doors and stairs.
- Emergency lights: battery units that light a path.
- Combination units: sign and light in one.
- Remote heads: extra lamps for corners.
- Test switches: monthly and yearly tests.
- Records: a log for the building file.
Where signs and lights go
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Signs mark exits, and emergency lights cover halls, stairs and large rooms. We walk the building to mark each spot.
Battery types and life
Batteries wear out in a few years. We test, replace and date each one.
Monthly and yearly tests
A short monthly test and a longer yearly test check that units last the required time. We run both and record results.
LED exit signs
LED signs last years and use little power. We replace old signs with them.
Remote heads and corners
A single unit may leave dark corners. We add remote heads to fill gaps.
Stairs and corridors
Stairs and long halls need even light. We place units to avoid shadows.
Large rooms and assembly spaces
Meeting rooms, dining areas and sanctuaries need more light. We size units for the area.
Parking and exterior exits
Doors to the outside need weather-rated units. We use sealed, corrosion-resistant fixtures.
Connecting to the building circuit
Units must connect ahead of local switches so they stay lit. We tie them to the right circuit.
Self-test units
Some units test themselves and flash a light if they fail. We install them where upkeep is hard.
Photoluminescent signs
Some spaces use glow-in-the-dark signs as a backup. We place them where allowed.
Failed unit repair
A unit that chirps or dims needs a new battery or charger. We fix or replace it.
Inspections and fire marshal visits
Inspectors ask for working lights and records. We give you a log to show.
Written test logs
Every test is dated and signed. We email a copy and keep one for your file.
Coordination with fire alarm and sprinklers
We work with other contractors so lights and alarms do not conflict.
Hotels, inns and rentals
Guest buildings need clear exits for strangers. We check every stair and hall.
Condos and associations
Common halls and stairs need regular tests. We offer a yearly plan.
Churches and halls
Large rooms need bright exit paths. We size units to the room.
Salt air and humidity
Coastal air eats at metal. We use corrosion-resistant parts outside.
Storm outages
After a hurricane, battery units may be run flat. We test and replace after outages.
Older buildings
With a median housing age near 1959 in town, some older buildings have few or no exit lights. We sketch a phased upgrade.
Seasonal use
Buildings that fill for part of the year need ready exits. We test before the busy season.
Permits
New runs may need a permit. We handle the paperwork.
Unit placement near doors and stairs
Light placed at the top of a stair or beside a door shows people where to step. We mount units at the right height.
Duration requirements
Battery units must run for a set time after power fails. We test with a timer and record the duration.
Circuit labels and breaker locks
Emergency circuits should not be switched off by mistake. We label breakers and add locks where allowed.
Fixture lifetimes
LED fixtures last longer than lamp types. We stock replacement batteries and chargers for common units.
Retrofitting older buildings
Older buildings may have a few exit signs and no battery lights. We plan a phased upgrade that suits the budget.
Training staff and managers
We show staff how to run a push test and read the status light, and we leave a one-page guide.
Exterior egress paths
Paths from doors to the street need light too. We add weather-rated units and wall packs.
Annual inspection support
We prepare the test log before the fire inspector arrives and fix anything that fails the same day.
Reading the label on a unit
A label shows battery type, test date and voltage. We note it so the next visit can compare.
Replacing a failed ballast or driver
Some units use a small power module that wears out. We replace it and test the lamp.
Choosing between white and green signs
Local preferences vary on sign color. We follow the plan of the building and the authority that reviews it.
Wiring a unit to a switched circuit
A unit must sense loss of power on the normal lighting circuit. We tap the correct, unswitched feed ahead of local switches.
Smoke, dust and kitchen grease on units
Dust and grease dim signs. We wipe lenses and replace yellowed covers.
Training for night staff
Night staff may be alone. We leave a simple card on where the units are and what a flashing light means.
Elevator lobbies and refuge areas
Lobbies and stair landings where people may wait for help need steady light. We add units rated for those areas.
Pool decks and outdoor stairs
Pool gates and outdoor stairs get wet and dark. We install sealed, corrosion-resistant units with a long battery run.
Cost-friendly replacement cycles
Replacing batteries on a schedule costs less than replacing whole units after failure. We plan a rolling cycle.
Warranty
We guarantee our labor for 2 years; add a Member Care Plan and that grows to 5 years.
Before we arrive
Send the floor plan, the number of exits and the last test record.
Safety first
Never block an exit sign or cover a unit. If a unit flashes or chirps, call us.
After the work
A dated test log and photos go in your building file.
Common questions
How often should units be tested? Monthly for a short test, and yearly for a full test.
Can you replace the batteries? Yes. We test and replace them and log the date.
Do you handle inspection records? Yes. We keep a log for each visit.
Our trucks leave the shop on Seminole Blvd, about 2 miles away, and work near Gulf Boulevard and the Intracoastal Waterway. We also serve Madeira Beach, Redington Shores, North Redington Beach, Indian Shores and Bay Pines.
Up: Emergency Exit Lighting across Tampa Bay · For everything we do locally, see Redington Beach electrical service.
Nearby: Bay Pines · Seminole · Indian Shores · Bear Creek
Call or text (727) 476-7079 for emergency exit lighting in Redington Beach, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
