Looking for electrical code corrections in Tampa Bay? Keywest Lights & Electric can help. Keywest Lights & Electric sends licensed electricians to Pinellas and Tampa Bay. The company is woman-owned and holds EC13014717.
Request code correction work.
Tell us what the notice or report says (a photo of it helps). Whether there is an open permit. Who did the original work, and your city or ZIP. A licensed electrician will call you back to plan the fix.
Electrical code corrections in Pinellas and Tampa Bay: we fix the items on a failed permit inspection, a code enforcement notice or a home inspector’s report. We legalize unpermitted electrical work and close out open permits.
Got a correction notice or a red tag? Call (727) 476-7079. Send us the notice.

When you need an electrical code correction.
A code correction is any electrical repair that someone with authority has told you to make. That might be a building inspector who failed a rough-in or final inspection. It could also be a fire inspector at a business or a buyer’s home inspector whose report now sits in the middle of a sale.
The notice says what is wrong. It rarely says how to fix it. And it never says who should do it.
- Failed permit inspection: a rough-in, final or service inspection that did not pass, with a list of corrections and a re-inspection to schedule.
- Notice of violation: a code enforcement letter about electrical work done without a permit, often found during a sale, a complaint or a neighboring job.
- Open or expired permits: electrical permits that were never finaled, sometimes years old, that turn up in a title search.
- Home inspection repair lists: electrical items a buyer’s inspector flagged, which the contract says must be fixed by a licensed electrician.
- Commercial write-ups: items from an annual fire inspection or a tenant’s insurance walk-through at an office, shop or restaurant.
If an insurer asked for corrections after a 4-point inspection. That has its own page: 4-point inspection corrections.
What inspectors write up most often.
Every notice is different. But the same handful of items shows up again and again on the correction lists we get from customers:
- Splices left outside a box, or junction boxes buried in a wall or ceiling with no cover or access.
- Missing GFCI or AFCI protection on circuits that the code now requires it on.
- Cable not secured or protected where it runs through a garage, an attic or an exterior wall.
- Wrong wire size for the breaker, or a breaker type the panel is not listed for.
- Panels with blocked working space, missing filler plates or an incomplete circuit directory.
- Outdoor boxes and receptacles that are not weather-rated or are missing in-use covers.
- Missing bonding at a water heater, gas line or pool, covered in more depth on our grounding and bonding page.

Fixing someone else’s work.
A lot of correction calls start with a remodel that a handyman or a previous owner wired. Or with a contractor who stopped answering the phone after a failed inspection.
Before we touch anything, we read the notice or report, look at the permit history. Open the boxes and panel to see what is actually there. Some work only needs a few devices or connectors changed. Some has to be pulled out and rewired.
If a permit is open in another contractor’s name. A change of contractor usually has to be approved before we can call for the re-inspection. We handle that permit paperwork for you whenever new wiring is needed.
Nothing gets covered up until the inspector has seen it.
Legalizing unpermitted electrical work.
Unpermitted wiring tends to surface at the worst time. During a sale, an insurance claim or a new addition. The usual path is an after-the-fact permit.
We document what was installed. Open walls or ceilings only where the inspector needs to see the wiring. Correct whatever does not meet code. Call for inspection so the permit can be closed out.
When the work is too far from code to save, we tell you plainly and price the replacement instead.
How a correction job works with us.
- Read the paper: send us the notice, report or permit number and photos of the items, and we tell you what each one usually takes.
- Look in person: we confirm each item on site and check nearby work the inspector is likely to look at on the re-inspection.
- Written scope: you get the list of fixes and the price before we start, with any open-the-wall work spelled out.
- Fix and re-inspect: we make the corrections, pull or take over the permit, meet the inspector, and send you the passed result.
Not sure yet whether there is a problem? A home electrical safety checkup is a lower-key way to find out before anyone writes it up.
Who signs off on the fix.
The licensed electrician who signs for your corrections works for Keywest Lights & Electric, a woman-owned Florida contractor (EC13014717) based at 6248 Seminole Blvd in Seminole. Home Depot lists us as a preferred contractor.
Corrections we make are backed for two years, or five on a Member Care Plan. We answer emergency calls around the clock.
Electrical code corrections in Tampa Bay after a failed inspection or a 4-point.
Electrical code corrections in Tampa Bay often come with a list. Failed permit inspections, code-enforcement notices, buyer’s 4-point reports, or unpermitted work from past owners. We check each item, open what we need to see. Fix it so an inspector can approve the work—not just patch it up again later. Common issues include open splices, missing GFCI or AFCI protection, unlabeled panels, and old cables.
The inspection must meet code standards. We also fix other dangers we find on the same circuit. We handle permits and re-inspections so you don’t have an unfinished job. When repairing others’ work, we keep a record of changes for future inspections. You can also read about permanent Christmas lights for Pinellas homes.
Electrical code correction FAQ.
Can electrical code corrections in Tampa Bay close an old open permit? Often. Yes. If we can bring the work up to the standard the inspector requires and schedule the reinspection. We look at the open items first and tell you what it will take. Some very old or undocumented work needs a broader scope than the original permit listed.
What happens if my electrical work fails inspection? The inspector gives a list of needed fixes. The permit stays open until they pass again. We go over the notice with you, fix each item, and schedule re-inspection. If we didn’t do the original job. We may take over as the contractor on record first.
Can you fix electrical work another contractor or a handyman did? Yes. Much of our correction work starts with someone else’s wiring. We open the boxes and panel, check the work against the current electrical code. Tell you what can stay. What must be redone and what the inspector will want to see.
How do I make unpermitted electrical work legal? Usually by getting a permit after the fact. We check what’s there. Open walls or ceilings where needed for inspection, fix anything not up to code. Pull a new permit so the work can be approved and closed out.
Do I have to update my whole house to current code? Not usually. Existing wiring that was legal when it went in can generally stay unless it is unsafe or you are altering it. What you add or change has to meet the code in force now. We explain where that line falls on your job before any work starts.
Do you correct code violations at businesses and rentals? Yes. We handle issues from fire, building, and code inspections in offices, shops, restaurants, and rental homes. We can schedule repairs during business hours or when tenants are not there.
Have a correction notice on your desk? Call (727) 476-7079 or use the form above and attach a photo of it.
See also: All services. Residential electrician. Commercial electrician. 4-point inspection corrections. Grounding and bonding. Panel upgrades. Electrical safety checkup.
Call or text (727) 476-7079.
