Building new? Ask about commercial new construction in Seminole. Keywest Lights & Electric wires ground-up commercial buildings in Seminole, from the first underground conduit to the final inspection. We are a licensed, woman-owned contractor on Seminole Blvd, and we work with owners, designers and general contractors.
Request commercial new construction in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Neighbors also book us for permanent lights under the eaves, a commercial electrician, a home EV charger and a backup generator. Also available here: commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial new construction in Seminole: electrical from the ground up
New buildings need electrical work before the concrete is poured and after the paint dries. Underground conduits must be set in the slab. The service must be planned with the utility. Every wall needs boxes at the right height. Missing a step early means breaking concrete later. We map each phase and tell the builder what we need and when.
Phases of a new building
- Site: service route, transformer pad, trenches, pole lights and conduit stubs.
- Slab: underground conduit, floor boxes, grounding ring and sleeves.
- Shell: main gear, feeders, panels, exterior lights and rough-in.
- Interior: circuits, lighting, controls, equipment hookups and low-voltage paths.
- Finish: devices, fixtures, testing, labeling, inspections and closeout.
Underground comes first
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Before the slab is poured, we place conduit for feeders, branch circuits and communications, plus the grounding electrode. Errors here are costly. We verify sizes and locations against plans, photograph the layout, and have the inspector sign off before the pour. Floor boxes in offices, kitchens and sales floors are set and leveled so they sit flush in finished flooring.
Service planning with the utility
The utility decides where the transformer sits and what service types are offered. Early coordination avoids surprises. We submit load data, ask for the connection point and plan the trench. Lead times for gear and for the utility vary. We raise the issue at the start of the project, not at the end.
Lighting and controls
Modern codes ask for energy-efficient lighting with controls, such as occupancy sensors and daylight sensors. We coordinate with the designer on fixture types, mounting and switching. Exterior lights are set for safety and security without spilling into neighboring lots. Emergency egress lighting is planned early so it follows the exit path.
What matters on Seminole sites
Seminole lots are often small infill parcels near existing buildings, along busy roads like Seminole Blvd and Park Boulevard. Staging space is tight, and neighbors are close. We plan deliveries, protect nearby structures and keep noise within local limits. Soil is sandy and the water table is high, so conduit sealing and pad elevation are part of the plan.
Inspections to a certificate of occupancy
We schedule and attend underground, rough-in, service and final inspections. The final electrical sign-off is part of the certificate of occupancy, so punch items are cleared quickly. We then deliver panel schedules, test records and warranty documents.
Working with the team
We join the project schedule and attend coordination meetings. Bids are itemized, change orders are written and communication is direct. Call or text (727) 476-7079 to talk about your plans.
Documents we deliver
- Before the pour: conduit layout photos, sleeve locations, inspector approval and a marked-up plan.
- At rough-in: panel schedules, circuit lists, box counts and a lighting layout check.
- At final: test sheets, labels, permit card, warranty letter and a spare-fixture list.
- After turnover: as-built drawings, equipment manuals and a contact for service calls.
Special systems on new buildings
Drive-up windows, order boards and canopy lighting all arrive late in the schedule. So do refrigeration racks, elevators, car chargers, rooftop units and signs. Each demands its own circuit. We reserve breaker space and conduit paths for them in the early design. That spares you from patching the slab or crowding a panel later.
Quality control on site
Each run is checked against the plan before it is covered. Boxes are plumb and flush, conduits are supported and sealed, and wire is color-coded and labeled. We torque terminations and test insulation resistance on feeders. These steps take time, but they prevent callbacks after the owner moves in.
Energy code and daylight
New commercial buildings must meet the state energy code, which sets lighting power limits and calls for controls. Skylights, storefront glass and tall windows let in daylight, and sensors can dim or switch off nearby fixtures. We coordinate zones with the designer so that control wiring matches the drawings. Clear labels at each panel and switch help the owner tune the system later.
Safe and tidy job site
Open trenches get barricades. Energized gear gets locks and tags. Spools of wire stay off the walkways, and scrap leaves each day. Neighbors on a busy road see a tidy site, which helps everyone.
Common questions
When do you need to be on site? Before the slab for underground work, and again at rough-in. We confirm dates with the builder.
Can you help with the utility application? Yes. We prepare load data and coordinate the service request, though the utility sets final terms.
Do you provide temporary power for construction? Yes. We can set a temporary pole or panel with ground-fault protection and convert it to permanent service later.
Who handles low-voltage wiring? We provide pathways and can coordinate with data, alarm and audio-visual vendors.
What is your warranty? Our workmanship carries a 2-year warranty, and equipment carries the maker’s warranty.
Our trucks leave the shop on Seminole Blvd and work near Lake Seminole Park, 113th Street North, the Pinellas Trail, Park Boulevard, Ulmerton Road. We also serve Ridgecrest, Indian Rocks Beach, Redington Shores, Madeira Beach, Pinellas Park, Redington Beach, Belleair Bluffs and North Redington Beach.
Up: Commercial New Construction across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for commercial new construction in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
