Need bathroom remodel electrical in South Highpoint? Keywest Lights & Electric handles bathroom remodel electrical in South Highpoint, from a single 1970s hall bath to a duplex or manufactured-home remodel. We are licensed and woman-owned, and we are about 7 miles away on Seminole Blvd.
Request bathroom remodel electrical in South Highpoint
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Work we already do in South Highpoint includes after-hours electrical repair, battery backup installation, JellyFish eave lighting and generator installation. Other pages for this area cover commercial generator installation, ev charger installation, generator interlock transfer switch, panel upgrade replacement and permanent lighting. Other pages for this area cover commercial electrician.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Bathroom remodel electrical in South Highpoint has to be planned before the tile goes down
A bathroom remodel moves outlets, lights, a fan and sometimes a heater or a whirlpool circuit, and all of that has to be in the walls before tile and paint. We meet you or your contractor, mark the boxes, and write a circuit list. In South Highpoint that often means a small 1970s bath with one receptacle and a tired light, or a manufactured-home bath where every inch of wall cavity is already spoken for. We plan the rough-in so the finish crew is not waiting on us.
What a modern bath circuit list looks like
- GFCI receptacle at the vanity: in the right place for the new sink, not the old one.
- Lighting: vanity lights, a ceiling light and, when you want it, a night or closet light.
- Exhaust fan: ducted to the exterior, on its own switch or a timer.
- A dedicated circuit when needed: for a heater, a whirlpool tub or a bidet seat.
- A switch layout you can live with: so a guest does not have to guess which device is which.
We also check the panel for space, because a 1970s cabinet may not have room for every new circuit.
1970s baths and shallow walls
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
The median year built is 1974, and many of these baths have shallow walls, a single small window and a panel that already carries electric heat. Moving a vanity two feet can mean a new stud bay and a new cable path. We open only what we must, we protect floors and we coordinate with the carpenter so a box is not buried behind a new grab bar or a recessed cabinet.
GFCI, bonding and a safer wet room
A remodeled bath should not reuse an ungrounded two-prong receptacle or a loose metal box with no equipment ground. We bring the vanity circuit up to current protection, we bond metal fixtures when the design requires it, and we keep low-voltage or vanity-mirror wiring out of the same dirty splice. If we find aluminum branch cable, we treat that as its own repair instead of landing a new GFCI on a weak splice.
Working with your contractor
Most remodels have a lead carpenter or a general contractor. We can bid from a plan, attend a rough-in walk, and come back for trim when the paint is done. We write our scope so it is clear what we supply and what the other trades supply. If the job is owner-led, we still need a simple drawing of the new vanity, the shower and the toilet so boxes do not land behind a mirror.
Duplex and rental remodels
About 19 percent of units here are duplexes, and about 48 percent of households rent. A remodel in one unit should not drop power to the unit next door. We isolate the circuits, we keep house-side laundry and porch lighting on, and we schedule noisy cuts when the neighbor has been told. The owner signs the scope, even when a tenant chose the finishes.
Manufactured-home bath remodels
About one home in four is a manufactured home. A bath remodel in that construction is a tighter puzzle: shallow floors, a bond to the chassis, and walls that may be only a couple of inches deep. We do not treat it like a site-built addition. We pick shallow boxes, we plan the fan path to a side wall or a soffit, and we protect the structure we open. If a larger electrical change is needed at the pedestal, we quote that separately.
Electric heat and leftover panel space
Because about 96 percent of households here heat with electricity, many services are already busy. Adding a bath heater or a larger water heater during a remodel can be the item that forces a panel change. We run the load numbers at the start, not after the tile is on the truck. If the panel cannot take the new circuits, you will see that in the first quote.
Rough-in, inspection and trim
We rough in the boxes and cables, leave them open for the inspector, and come back after approval to trim the devices, hang the lights and test every circuit. We do not bury a box behind tile before the sticker is on the job. If the inspector wants a change, we handle it and we tell you what changed.
Paperwork for a remodeled bath
A remodel that adds circuits, moves a fan or changes the service needs permit paperwork. We prepare it, we schedule the rough and final visits, and we keep copies for you and your contractor. In this unincorporated community the parcel decides who reviews the work, even when the mail says Largo, Clearwater or Pinellas Park.
Warranty after the bathroom is back in use
The wiring, devices, fan and fixtures we supply and install are covered for two years, or five years with the Member Care Plan at /member-care-plans/. The warranty covers our electrical work. It does not cover tile, showers, or fixtures you or another trade supplied unless we agreed to install those fixtures in the quote.
Vanity lights, medicine cabinets and wet-area layout
We place the vanity fixtures so a medicine cabinet door can open, and we keep the GFCI far enough from a tub that a person with wet hands still has a legal, useful receptacle. If you want a recessed cabinet, a linear shower light or a low night light, we mark those boxes at rough-in so tile and mirrors are not drilled later. Each wet-area device gets the right cover and the right protection.
Common questions
When should the electrician come during a bathroom remodel? A: Once the layout is set and before walls close. We also come back for a final trim after paint and tile.
Can you work from my contractor’s drawings? A: Yes. A simple plan with the vanity, toilet, shower and switch locations is enough to start a quote.
My 1970s bath has only one outlet. Can you add more? A: Yes, with the right GFCI protection and a path in the wall. We will tell you if the panel also needs space.
Do you handle the permit? A: When the remodel needs one, we prepare the paperwork and meet the inspector for rough and final.
Can you remodel electrical in a manufactured-home bath? A: Yes. We plan shallow boxes and a legal fan path, and we keep any pedestal work on a separate line.
Will the neighbors in my duplex lose power? A: We isolate your unit. Shared equipment is planned with you so we do not surprise the other address.
How do I get a quote? A: Call or text (727) 476-7079 or use the form at the top of this page. Photos of the bath and the panel help us prepare.
The South Highpoint job site is about 7 miles from our Seminole Blvd shop. You will see us along 49th Street North, Ulmerton Road, Roosevelt Boulevard and 34th Street North. We also cover Feather Sound, Largo, Pinellas Park, St. Petersburg and Clearwater.
Up: Bathroom Remodel Electrical across Tampa Bay · For everything we do locally, see South Highpoint electrical service.
Cities next door: Seminole · Bear Creek · Indian Shores · Tierra Verde · Bay Pines
Call or text (727) 476-7079 for bathroom remodel electrical in South Highpoint, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
