ADU Guest House Electrical in Tampa Bay

Need ADU guest house electrical in Tampa Bay? Keywest Lights & Electric wires accessory dwelling units, guest houses and casitas across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we plan feeders, subpanels and circuits to code.

Request adu guest house electrical in Tampa Bay

Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

An electrician wiring a small guest house
An electrician wiring a small guest house.

ADU guest house electrical in Tampa Bay: power for the second home on your lot

An accessory dwelling unit can be a casita, a garage apartment or a backyard cottage. Families build them for parents, grown children, guests or rentals. Each unit needs a safe electric supply from the main house, a panel of its own and circuits for living, cooking and cooling. Planning the electrical first saves rework later.

What an ADU needs

  • Feeder from the main panel: sized for the added load.
  • Subpanel in the unit: local disconnect and breaker space.
  • Kitchen circuits: range, refrigerator, microwave, dishwasher.
  • Cooling and heat: mini-split or air handler circuit.
  • Water heater circuit: tank or tankless.
  • Smoke and carbon monoxide alarms: interconnected.
  • Exterior lights and outlets: weather-rated.

Load calculation first

  • Florida electrical contractor license EC13014717, licensed & insured
  • Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
  • 2-year workmanship warranty, 5 years with a Member Care Plan
  • SPAN Authorized Installer and Home Depot preferred contractor
  • Open 24/7 for electrical emergencies: call or text (727) 476-7079

Before we choose wire, we add up the loads of the main house and the new unit. If the main service is too small, we recommend an upgrade. If it is large enough, we can run a feeder. The calculation guides panel size, breaker size and wire gauge.

Trenching and conduit

Detached units usually need underground conduit. We plan the route around trees, pools and sprinklers, set depth to code and mark the path. Where trenching is hard, an overhead route is sometimes allowed, but looks and clearances matter.

Subpanel and grounding

A detached unit has its own grounding electrode and neutral and ground separated at the subpanel. We install a disconnect at the unit, ground rods and bonding that meet code. This keeps faults safe and clear.

Garage conversions and attached units

Converting a garage to a living space affects wiring, heat and ventilation. Outlets must be added at living-room spacing, and some circuits must be updated. We coordinate with your builder and plan the electrical rough-in before insulation.

Kitchens and baths

A small kitchen needs several dedicated circuits and ground-fault protection. A bath needs a fan, a vanity light and ground-fault outlets. We position outlets to suit cabinet layouts.

Cooling and ventilation

A compact unit needs a right-sized mini-split or heat pump. We check the circuit, disconnect and breaker, and wire controls cleanly. A separate cooling circuit keeps lights steady in summer.

Smart panels and car chargers

Some owners add a car charger or a battery system. Load planning matters more with a second dwelling. A smart panel or load management device can help avoid a service upgrade. We discuss options honestly.

Permits and inspections

An ADU needs building and electrical permits, and zoning rules affect size and use. We prepare the electrical portion, schedule rough and final inspections and coordinate with your general contractor. Our workmanship carries a 2-year warranty, or 5 years with the Member Care Plan.

Why choose Keywest Lights & Electric

We are licensed, insured and woman-owned, and we know how to plan a second dwelling’s wiring. We explain choices simply and deliver tidy, labeled work. Call or text (727) 476-7079.

Planning with your builder

Share the floor plan, appliance list and mechanical plans early. We mark outlet and switch locations, discuss lighting and plan the panel position. Early coordination avoids last-minute changes after drywall goes up.

Rental units and tenant needs

If the unit will be rented, plan for separate metering where allowed, tamper-resistant outlets and easy-to-read labels. Keep access to the panel clear for emergencies. Local rules may require extra safety features.

Sizing wire and breakers

Wire size depends on distance and load. Long runs to a backyard unit lose voltage, so we may use a larger gauge than the minimum. Breakers protect the wire, not the appliance, and must match it. We document each size on a panel schedule you can keep.

Fire separation and attic runs

In a garage apartment, ceilings and walls may be fire-rated. Penetrations must be sealed, and some boxes need special covers. We use listed firestop materials and keep cable out of areas where it could be damaged.

Lighting design for small spaces

Small rooms feel bigger with layered light: ceiling cans, a lamp outlet, under-cabinet strips and a mirror light. Dimmers help set the mood. We place switches at each door and keep a clear path for night-time trips.

Internet, TV and intercom

Guest units need Wi-Fi coverage, cable or fiber lines and sometimes a door intercom. We run low-voltage conduit with the power feeder, leaving a pull string for future upgrades. Keeping power and data cables separated reduces noise.

Grounding rods, ufer grounds and bonding jumpers

A detached unit needs its own grounding electrode, such as driven rods or a concrete-encased electrode. Metal gas and water pipes are bonded too. We test the resistance where practical and photograph each connection before backfill.

Common questions

Do I need a subpanel in my ADU? Usually yes. It gives a local disconnect and breaker space.

Can my house panel handle an ADU? It depends on a load calculation. We check and advise.

Do ADUs need permits? Yes. We handle the electrical permit.

Can you convert my garage? We do the electrical side with your builder.

Can an ADU have its own meter? In some cases. It depends on local rules and the power company.

Do you wire mini-splits? Yes. We install circuits and disconnects.

Can I run extension cords instead? No. Cords are not a safe permanent feed for a dwelling.

Do you serve my area? We serve Pinellas, Hillsborough and Pasco counties. Call or text (727) 476-7079 to confirm.

Local pages: ADU guest house electrical in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services. Also available here: adu guest house electrical.

Call or text (727) 476-7079 for adu guest house electrical in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.