Adding a guest house or ADU in Bay Pines? Keywest Lights & Electric provides ADU guest house electrical in Bay Pines for detached guest houses, in-law suites and backyard units. We are licensed and woman-owned, and we plan the feeder, subpanel and circuits so the new space is safe and comfortable.
Request adu guest house electrical in Bay Pines
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Related jobs near Bay Pines: a car charger circuit, shop and office electrical work, a business standby generator and generator installation. Related: jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

ADU guest house electrical in Bay Pines: power for a second home on the lot
Many Bay Pines owners consider a guest house for family or a rental. A detached unit needs its own power plan: a feeder from the main house or a new service, a subpanel and circuits for the kitchen, bath, cooling and lights. Good planning keeps the main house’s panel from being overloaded.
What we handle
- Feeder from the main panel: wire size and conduit route.
- New service options: when the load is too large to share.
- Subpanel: breakers inside the unit.
- Kitchen circuits: small appliances, range, refrigerator.
- Bathroom circuits: ground-fault outlets and exhaust fans.
- Mini splits and heat pumps: dedicated circuits.
- Smoke alarms and lighting: code-ready layout.
Start with a load calculation
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We add up the lighting, the appliances, the cooling and the water heater in the new unit, then compare the total with your main service. If the main service has room, we feed the guest house from it. If not, we plan a service upgrade.
Feeder routes
A buried feeder runs in conduit, with warning tape above it, at the proper depth. An overhead feeder needs clearances from pools, driveways and structures. We sketch both options and choose the one that fits your lot.
Subpanel and disconnect
A detached unit needs a disconnect where the feeder enters and a subpanel with separate neutral and ground bars. We ground the unit with its own electrode and bond the pieces correctly.
Kitchens and baths
Even a small kitchen needs several circuits. We plan outlets above the counter, a refrigerator circuit, a microwave circuit and the range or cooktop circuit. Baths get ground-fault protected outlets and a vented fan.
Heating and cooling
A mini split or a small package heat pump is common in a guest house. We coordinate with your HVAC company and place the disconnect near the outdoor unit.
Metering and rentals
Some owners rent the unit and want a separate meter. A separate meter changes the service plan. We explain the options, the permit steps and the equipment needed.
Garage and studio conversions
If the unit sits above or inside a garage, we plan fire-rated wall penetrations, smoke alarms and the right outlet layout for living space.
Phone, data and security
We pull data and low-voltage cable along with the power, so internet and cameras work from day one.
Permits and inspection
An ADU is a major project with many inspections. We prepare the electrical filing, schedule rough-in and final, and coordinate with your builder.
Flood zone checks
Parts of the community lie in flood zones. We discuss elevation of panels and outlets with your designer, so the plan matches what the local rules expect.
Grounding and bonding at a second structure
A detached building needs its own ground electrode, and the feeder needs a proper equipment ground. We drive rods, bond metal piping and use rated clamps, then measure the result.
Water heater and laundry
Even a small guest house often has a compact water heater and a stackable washer and dryer. We size each circuit to the nameplate and plan the closet layout for easy service.
EV charging for a guest
A second building can host a charging circuit for visitors. We plan the load so the charger and cooling do not overload the feeder.
Rental rules and safety
Rental units need interconnected smoke alarms, protected outlets and clear egress lighting. We install each and leave a short compliance sheet for your records.
Solar and storage readiness
If you may add solar panels and a battery later, we leave conduit and space in the subpanel. Panel work is handled with licensed partners, and we coordinate the electrical connection.
Landscape and path lighting
A path from the main house to the unit needs low light and a switch inside the door. We plan a dusk-to-dawn path light and a motion light at the entry.
Why a guest house changes the main panel
A detached unit adds a significant new load. Cooling, a range, a water heater and a charger can double the demand on a small service. We review your main panel’s age and capacity first, and we explain whether a feeder, a subpanel or a new service is the cleanest route.
Trenching, conduit and yard care
A buried feeder crosses a lawn, a driveway or a patio. We mark underground lines, route around tree roots, protect irrigation and restore the surface so the yard looks tidy afterward.
Sound, privacy and neighbors
Mini-split condensers, pool pumps and generators can irritate neighbors. We place equipment with distance and screening in mind, and we plan shutoffs that are easy to reach.
Accessible design
A guest house for an older relative may need lever switches, bright path lights and outlets at easy heights. We add motion lights at the bath door and a simple emergency light near the bed.
Timelines and trade handoffs
Foundation crews, framers, plumbers and HVAC technicians each hand work to the next. We provide a simple sequence list so your builder knows when we need the trench open, when we need walls open and when we return for trim.
Keeping the paperwork organized
Save the plan set, the permit card and each inspection record in one folder. A buyer, a lender or an insurance agent will ask for them someday.
Doors, locks and smart entry
Keypad locks, video doorbells and motion lights need a quiet low-voltage path. We run it with the power so no wall needs reopening.
Warranty
We stand behind our workmanship for 2 years, or 5 years with a Member Care Plan.
Before we arrive
Share the plans, the unit size and your timeline. A site photo showing the panel and the proposed location helps.
Common questions
Can my main panel feed a guest house? Often yes. We run a load calculation to confirm.
Does a guest house need its own meter? Not always. A separate meter is needed for some rentals and some designs.
Do you handle the whole electrical plan? Yes. We plan the feeder, subpanel, circuits and inspections.
Our trucks leave the shop on Seminole Blvd, about a mile away, and work near Bay Pines Boulevard, Seminole Boulevard, Long Bayou and Boca Ciega Bay. We also serve Kenneth City, Pinellas Park, Largo, Indian Shores and Redington Shores.
Up: ADU Guest House Electrical across Tampa Bay · For everything we do locally, see Bay Pines electrical service.
Nearby: Seminole
Call or text (727) 476-7079 for adu guest house electrical in Bay Pines, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
