Need warehouse industrial electrical service in Seminole? Keywest Lights & Electric works on warehouses, light-industrial shops and storage buildings in Seminole: high-bay lighting, motors, panels, dock equipment and three-phase power. We are licensed and woman-owned, with our shop on Seminole Blvd, and we keep downtime short.
Request warehouse industrial electrical in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Other Seminole jobs our crew takes on include standby generators, EV chargers, JellyFish holiday and event lighting and business electrical work. Related: commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Warehouse industrial electrical in Seminole: power for work that moves
Warehouses and shops depend on power for forklifts chargers, doors, compressors and lights. A bad panel or dark aisle slows the whole operation. We repair faults, plan upgrades and keep records, with a focus on safety and uptime.
Common jobs
- High-bay lighting: LED fixtures with sensors.
- Motors and controls: starters, disconnects and VFDs.
- Panels and feeders: upgrades and load checks.
- Three-phase power: new service and equipment hookups.
- Dock equipment: door operators, levelers and lights.
- Battery charging: forklift and equipment chargers.
- Compressors and tools: dedicated circuits.
Lighting and safety
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Dark warehouses are dangerous. LED high-bay fixtures give even light, start instantly and use little power. We add occupancy and daylight controls to save energy and place emergency lights along exits. Good lighting also reduces errors in picking and packing.
Motors, starters and controls
Motors need the right wire, breaker, starter and overload. We wire new equipment to nameplates, test rotation and set overloads. Where equipment trips often, we test current, check connections and inspect motors. A variable frequency drive can save energy and soften starts.
Panels, feeders and load growth
Many shops outgrow their panels. We measure the load, balance phases and check feeders for heat. If the service is full, we plan an upgrade with minimal downtime, using planned outages and temporary power when possible. Clear labels and one-line drawings help future work.
Charging stations and equipment rooms
Forklift and pallet jack chargers need dedicated circuits and ventilation. We install receptacles, disconnects and ground-fault protection where required. Equipment rooms get lighting, outlets and clean wiring that keep tools ready to use.
Local industrial areas
The Pinellas Park, Largo and Ulmerton Road areas have many light-industrial buildings near Seminole. Salt air and heat shorten the life of electrical parts. We choose sealed enclosures and plan maintenance on a schedule. Thermal scans find loose connections before they fail.
Safety and planning
We follow lockout and tagout steps, notify staff and test before we touch wires. Call or text (727) 476-7079.
Lockout and tagout in practice
Electrical work in a working building requires discipline. We identify the source of power, shut it off, lock it, tag it and test with a meter before work begins. We tell staff what areas are affected and when power will return. After the work, we remove locks in order and test the equipment. This method keeps people safe.
Thermal imaging and preventive checks
Loose lugs and overloaded breakers run hot long before they fail. A thermal camera shows them as bright spots without touching anything. We scan panels, disconnects and motor control centers, write a short report with images and recommend fixes. A yearly scan can prevent a surprise shutdown in the middle of a busy season.
Dock doors and exterior lighting
Loading docks are busy and noisy. Door operators, dock levelers and lights need protected wiring, and the lighting should show the trailer bed and the pavement. We replace failed fixtures, add sensors and repair damaged conduit from truck traffic. Good lighting helps drivers and reduces accidents.
Compressors, welders and shop tools
Compressors and welders draw heavy current when they start. Wire sizing, breaker size and voltage drop all matter. We check nameplates, upgrade circuits where needed and add disconnects within sight of the equipment. A solid receptacle layout reduces cords across floors and trips.
Planning for growth
Many shops add equipment over time. We help you plan a panel and feeder layout that can grow, set aside spare spaces and leave conduit for later. A little planning today means less downtime when you add a new machine or move to a larger operation.
Mezzanines, offices and break rooms
Many warehouses include an office mezzanine, a break room and restrooms. These spaces need quiet lighting, outlets for computers, air conditioning circuits and proper ground-fault protection. We wire them to the same standards as any office, with attention to the noise and dust around them.
Cold storage and ventilation
Coolers, freezers and big fans demand steady power and sturdy controls. We install defrost heaters, thermostats and alarm circuits, check motors and wire exhaust fans for loading areas where vehicle exhaust collects. Reliable ventilation keeps workers comfortable and safe.
Racking, aisles and fixture placement
Storage racks block light, so fixtures must match aisle layouts. We study the rack plan, align high-bay fixtures over aisles rather than racks and choose beam spreads that reach the lower shelves. When racks are rearranged, we can shift fixtures or add a few new ones without rewiring the whole building.
Power for new tenants
Warehouse units often change hands. A new tenant may need three-phase power, a bigger panel, extra outlets and lighting for a different layout. We review the lease, walk the unit, test the existing equipment and write a clear plan with options and phases.
Common questions
Can you install high-bay LED lights? Yes. We plan layouts and wire fixtures with sensors.
Do you wire three-phase equipment? Yes. We match circuits to equipment nameplates.
Can you work around shifts? Yes. We plan outages and work after hours.
Do you service battery chargers? Yes. We wire circuits and test them.
Can you scan for hot connections? Yes. We use thermal imaging to find them.
Our trucks leave the shop on Seminole Blvd and work near Walsingham Road, 113th Street North, the Pinellas Trail, Boca Ciega Bay, Park Boulevard. We also serve Kenneth City, North Redington Beach, South Pasadena, Largo, Madeira Beach, Treasure Island, Bardmoor and West Lealman.
Up: Warehouse Industrial Electrical across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for warehouse industrial electrical in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
