Planning under cabinet lighting installation in Tampa Bay? Keywest Lights & Electric installs hardwired under-cabinet lighting in kitchens, bars, laundry rooms and workshops across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we hide the wire, add a dimmer and test the light at the counter.
Request under cabinet lighting installation in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Under cabinet lighting installation in Tampa Bay: light where you work
Overhead lights throw your own shadow onto the counter. Light from under the cabinet lands directly on the cutting board, the sink and the stove, and it makes a kitchen feel larger at night. A good installation hides the fixtures, hides the wire and gives even light without hot spots or glare in the backsplash.
Types of under-cabinet lights
- Linear LED bars: rigid strips with a diffuser, wired in a chain.
- Flexible LED tape: thin strip in an aluminum channel.
- Puck lights: round, directional lights for display and shallow shelves.
- Plug-in strips: simple to place, with a visible cord.
- Hardwired fixtures: connected to a switch with no cord at all.
- Under-shelf and toe-kick lights: accents and night lights.
Hardwired versus plug-in
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A plug-in strip is fast, but the cord shows, the outlet is used and the switch is on the strip itself. Hardwired lighting connects to a wall switch or dimmer and keeps every wire out of sight. In a remodel, we run cable inside the wall to a junction near the cabinet. In a finished kitchen, we use small channels, tape or a cable path through the cabinet side.
Brightness, color and dimming
Light level is measured in lumens, and counters usually want a generous amount. Color temperature matters too: 2700 kelvin looks warm and golden, 3000 looks soft white, and 4000 looks crisp and neutral. A high color rendering score makes food and finishes look true. We match the color to your ceiling lights, so the room looks planned, and we add a dimmer that works with the LED driver.
Power supplies and drivers
LED tape needs a low-voltage driver. Drivers hide in a cabinet top, a nearby closet or a tidy box, and they need ventilation and access for service. We size the driver with a margin, keep wire runs short to avoid dimming at the far end and install a switch that you can reach without leaning over the stove.
Backsplash and glare
Glossy tile and polished stone throw back a bright line of light. We place fixtures toward the front of the cabinet, add diffusers or choose a lower beam spread so the reflection stays soft. A sample test with a strip of light before we fasten anything saves regret later.
Cabinets that are tricky
Frameless cabinets, shallow rails and glass-front uppers need special fixtures and mounting methods. Where there is no lip to hide the light, we use a thin bar with a built-in shield. For open shelves, we route the wire along the back. For crown molding, we may hide lights above the cabinets to give a gentle wash.
Kitchens, bars and laundry rooms
Under-cabinet light helps in any room where you work at a counter: a wet bar, a laundry room folding area, a home office hutch, a craft room or a garage workbench. Each room has its own best color and brightness, and we adjust to the task.
Quotes, permits and warranty
Low-voltage lighting often needs no permit when we plug into an existing circuit, but new circuits and new switches do, and we take care of that. Our workmanship carries a 2-year warranty, or 5 years with a Member Care Plan.
Wire sizes, connectors and low-voltage safety
Most LED tape runs on 12 or 24 volts. Low voltage is safer to touch, but the line side of the driver still carries full household current and must be wired in a proper box. We use listed connectors, solder-free clips only where they hold firmly and heat-shrink at the joints. Cable that passes through cabinet walls gets a grommet to prevent chafing.
Planning around outlets, appliances and range hoods
Under-cabinet light interacts with other items on the wall: outlets, a microwave, a range hood, a pot filler. We plan the run so the light starts and ends cleanly, and the driver does not sit behind a heat source. If a hood lies below the cabinet, we choose a fixture size that clears it and shades the lamp from steam.
Maintenance and replacing parts
Good installations make later service easy. We label drivers, leave slack in the wire and choose strips that can be unplugged at connectors. If a section fails, you can swap it without removing a cabinet. We leave a note with the model and color so a replacement matches.
Layered kitchen lighting plans
Under-cabinet light is one layer. Ceiling lights give general light, pendants create focus and toe-kick lights make a soft night glow. We help you plan all the layers, each on its own switch or dimmer, so you can set a bright work mode and a quiet dinner mode with a tap.
Common questions
Can you install under-cabinet lights in a finished kitchen? Yes. We use small channels, tape or the cabinet side to hide the wire and avoid opening walls whenever possible.
Do under-cabinet lights need a dimmer? A dimmer is helpful, since you can use bright light for cooking and soft light in the evening. We match it to the LED driver.
Which color is best? Many owners pick warm white of about 3000 kelvin. We bring samples so you can see the difference on your counters.
Are LED strip lights safe under cabinets? Yes, when installed with the right driver, wire and mounting. Poor power supplies are the main problem.
Can they be wired to a switch by the door? Yes. We run low-voltage or line-voltage cable to a wall switch or a smart control.
How long do LED strips last? Quality LED parts last many years. Drivers are the part that usually needs replacement first.
Can you add lights above and below the cabinets? Yes. Toe-kick and above-cabinet lights add depth, and each can be on its own dimmer.
Will you match the lights I already have? We can match the color and the brightness, or replace old lights with a consistent set.
Local pages: under cabinet lighting installation in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services.
Call or text (727) 476-7079 for under cabinet lighting installation in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
