Solar installation in Bloomingdale tends to center on homes built between 1980 and 2000, which account for about two of every three houses in this Hillsborough County community. Those houses usually offer generous usable surface, a panel with some spare spaces and a shingle covering that may be on its second round. Keywest Lights & Electric (EC13014717) handles the electrical side: we check panel capacity, design the interconnection, install the disconnect and rapid shutdown wiring, and commission the system. Licensed partners supply and mount the modules. Adding a SPAN smart panel lets you see production and steer power circuit by circuit.
Request a solar quote in Bloomingdale
Tell us about the property and what you want to keep running. We reply with next steps and a time for the site visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Bloomingdale at a glance
The Census Bureau’s 2020-2024 survey counts about 23,800 residents. Their median age is roughly 42. The median home was built in 1989; the 1980s alone produced nearly four homes in ten, and the 1990s about a quarter. Detached houses make up close to nine of every ten units, and four in five households own. Electricity heats around 92 homes in a hundred.
Solar installation in Bloomingdale and the shingle question
A shingle roof put on in the late 1990s or 2000s may be nearing the end of its life. Mounting modules and then removing them for a reroof adds labor and risk. So before design, we ask the roof’s age, look for curling or granule loss, and suggest a roofer’s opinion when the covering is worn. If a reroof is coming, timing the two jobs together saves a second trip.
Two-story layouts
Many homes here have a second floor, which means longer conduit runs from the array down to the panel and taller ladders for the crew. We plan the route so conduit follows corners and stays tidy against stucco, and we keep the rapid shutdown switch at a spot first responders can reach.
Panel capacity in 1980s and 1990s houses
A 150 or 200 amp panel from that era often has room, but the bus rating sets how much solar can back-feed it. We do the math in writing. If the panel falls short, options include a line-side connection, a main breaker change or a panel replacement, which is a natural moment to switch to a smart panel.
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
- Projects up to $2 million, with bonding up to $1 million
Orientation and shade
Streets in planned neighborhoods run in many directions, so roof faces vary from house to house. South and west faces usually produce the most. Mature oaks and pines planted with the subdivision now cast real shade, and we model it across the seasons before suggesting a layout.
Homeowner associations
Many Bloomingdale subdivisions have an association. Florida law limits how far an HOA can block solar, though it may weigh in on where modules go when output stays similar. We prepare a simple layout drawing you can submit, and we wait for approval before scheduling the crew.
Monitoring after startup
Each system comes with an app that tracks daily production. We walk you through it on commissioning day, set alerts for faults, and explain what normal looks like in summer storms and short winter days.
Matching output to daily use
Cooling drives most of the bill here. Production lines up well with afternoon air conditioning, while evening use draws from the grid or a battery. We review a year of usage so the array matches how your household actually lives.
Wind-rated mounting
After Milton crossed the state in October 2024, the National Hurricane Center counted 45 tornadoes in Florida from that storm. Partners use mounts rated for local wind loads, and we strap and seal every penetration on the electrical side.
Workmanship above code
Passing inspection is the floor. Our crews add torque records for terminations, labeled conduit, a surge device at the panel and a one-page map of your system for future service.
Florida incentives
Qualifying solar equipment is exempt from Florida sales tax. The value the array adds is left out of your property assessment. Net metering may credit surplus energy sent to the grid. Consult a tax professional; incentives can change.
Coverage after the job
Area installers often stop labor coverage at twelve months. Our electrical work is covered for two years, or five with the Member Care Plan. Module and inverter makers back their own products.
Talk with our team
Bloomingdale is about 32 miles from our Seminole shop at 6248 Seminole Blvd. Call or text (727) 476-7079, or send your roof and panel details through the form near the top. For outage protection, see battery backup installation in Bloomingdale and generator installation in Bloomingdale. Planning holiday lighting too? Our crews install JellyFish permanent lighting in Bloomingdale. Neighbors further away can read about solar in Whitfield, Mango, Balm, Port Richey and Jasmine Estates.
Bloomingdale solar FAQs
My shingles are about 20 years old. Should I reroof first? Often yes. We look at the condition and suggest a roofer’s opinion when it is worn.
Will my 1990s panel handle solar? Many can; the bus rating decides, and we show the calculation.
Who mounts the modules? Licensed partners. We do all electrical design, wiring and startup.
Does a two-story home cost more time? It can add conduit length and setup, which we plan ahead.
How far is your shop? About 32 miles, in Seminole.
Related: solar installation across Tampa Bay · SPAN smart panel installation · generators in Bloomingdale · battery backup in Bloomingdale · electrician in Bloomingdale · Hillsborough County service area. Nearby: solar in Jasmine Estates · solar in Whitfield · solar in Mango · solar in Port Richey · solar in Balm · solar in Brandon · solar in Riverview.
