Need self storage electrical in Tampa Bay? Keywest Lights & Electric wires self-storage facilities across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we plan lighting, gate operators, climate control, cameras and unit power so the site is safe and easy to run.
Request self storage electrical in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Self storage electrical in Tampa Bay: power for a site that never sleeps
Storage facilities hold boats, furniture, files and inventory. Customers visit at all hours, so lights, gates and cameras must work. Climate-controlled buildings need steady power for cooling. A new site or an older one needs wiring that keeps security tight and costs predictable.
What a storage site needs
- Hallway lighting: motion-controlled and bright.
- Exterior lights: poles and wall packs for lanes and doors.
- Gate operators: power and control wiring.
- Cameras and access: steady power and network lines.
- Climate control: feeders and disconnects for cooling.
- Elevators and doors: motors and safety circuits.
- Office power: desk, computers and kiosk.
Lighting and sensors
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Hallways in storage buildings need even light without wasteful burn. Motion sensors turn lights on as customers enter and off when they leave. We place sensors to cover whole aisles and avoid false triggers from roll-up doors.
Exterior lanes and lots
Drive lanes and loading areas need steady light for safe driving and good camera images. We choose pole heights, spacing and fixtures to avoid dark spots. Photocells and timers keep lights on at night only.
Gates and kiosks
Gate operators need a dedicated circuit, a disconnect and low-voltage control cable. Keypads and kiosks need clean power and network. We install conduit to each point and protect it from vehicles.
Cameras and alarms
Cameras and recorders need steady power, often with a battery backup. We run circuits to poles and corners, add surge protection and keep wiring neat. A single point of control makes service easier.
Climate-controlled buildings
Cooling units, dehumidifiers and ventilation fans need large circuits. We check the supply, install disconnects and label equipment. Balanced loads keep voltage steady.
Unit outlets and charging
Some units offer outlets for tools or electric vehicles. These need ground-fault protection, metering where required and clear rules for use. We design circuits with limits to prevent overloads.
Roll-up doors and openers
Powered doors add motor loads and safety sensors. We provide circuits, disconnects and conduit paths, and test limit switches.
Metal buildings and roof wiring
Storage buildings are often metal. We use conduit systems that handle expansion, grounding that is tested and fittings made for outdoor use.
Surge protection and lightning
A tall metal building draws lightning. Surge devices at the main and at gate and camera circuits protect electronics. We bond the structure and test the grounding.
Permits and inspections
Fresh sites and big upgrades go through permit review and inspection. Our team files the packet, stands with the inspector and keeps the punch list short. Our workmanship carries a 2-year warranty, or 5 years with the Member Care Plan.
Why call Keywest Lights & Electric
Owners hire a licensed, insured, woman-owned crew that lines up builders and security vendors on a single schedule. Call or text (727) 476-7079.
Phased upgrades for live sites
Existing sites stay open during upgrades. We work in zones, post signs and keep lanes clear. Each phase ends with tested lights and tidy conduit.
Maintenance plans
We can check lights, gates, panels and surge devices on a schedule. Early fixes keep customers happy and complaints low.
Hallway sensors and zoned control
A long hallway can be split into zones that light only where someone walks. Sensors with a short delay save energy without leaving customers in the dark. We mount them at ceiling height and aim them down each aisle.
Roof drains, wet walls and sealed boxes
Metal storage roofs sweat and sometimes leak. Water can reach boxes and fixtures. We use gasketed boxes, drip loops and fixtures with sealed lenses.
Truck lanes, dock doors and loading lights
Moving trucks need wide turns and clear lanes. We place lights at corners and doors, add wall packs at loading points and keep wiring inside protected conduit.
Kiosks, payment pedestals and keypads
Self-serve kiosks need steady power, network cable and sometimes cooling. We mount pedestals on concrete, run conduit underneath and add a surge device.
Fire alarm and sprinkler coordination
Storage buildings often have sprinklers and alarm panels. We coordinate with the alarm vendor and sprinkler contractor so conduit routes and power sources are ready for them.
Lighting layouts for corridors and lanes
A good plan puts fixtures where they light door faces, not just floors. We space lights to avoid dark pockets between units and choose lenses that spread light along the length of the hall.
Electric vehicle chargers in storage lots
Some operators offer EV charging. We evaluate the service, plan breaker space and install chargers with ground-fault protection. Load management keeps the site from exceeding its limit.
Solar-ready and battery planning
Operators may add panels on large roofs later. We leave conduit paths and panel space. Solar panel work is done with licensed partners.
Lights that survive heat and rain
Metal corridors bake in summer. Fixtures need drivers rated for hot enclosures and lenses that resist yellowing. We choose parts with a long service record and mount them with stainless hardware.
Wire paths along block walls and metal frames
Surface conduit along block walls is easy to inspect. Along metal frames, we clip conduit to purlins and bond every joint. Expansion fittings handle roof movement.
Guard posts, bollards and cabinet placement
Gate operators and meter cabinets near drive lanes get hit by trucks. We place posts, set cabinets back from turns and mount conduit at safe heights.
Transformers, panels and service entrance sizing
Large storage sites add climate buildings over time. We review the service, check transformer capacity with the power company and place panels near each building to keep wire runs short and voltage steady.
Loading docks, ramps and lift gates
Where trucks back up to docks, we place lights above doors, add weatherproof outlets for hand trucks and protect conduit from bumps with steel guards.
Common questions
Can you power a brand new storage campus? Yes, from service to gates and lights.
Can you swap tired hallway fixtures? Yes, and we add motion sensors.
Can you power cameras? Yes, with surge protection.
Do you wire gate operators? Yes.
Can you add outlets in units? Yes, with protection.
Can you work on a live site? Yes, in phases.
Who handles permit paperwork? We do.
Which counties do you cover? Pinellas, Hillsborough and Pasco. Call or text (727) 476-7079 to confirm your address.
Local pages: self storage electrical in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services.
Call or text (727) 476-7079 for self storage electrical in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
