Need mobile home electrical repair in Bear Creek? For mobile home electrical repair in Bear Creek, Keywest Lights & Electric works in listed manufactured-home wiring, at the pedestal and in the underbelly, with landings that fit that product. Call or text (727) 476-7079 with the year, a photo of the interior can and a photo of the pedestal.
Request mobile home electrical repair in Bear Creek
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Other work we do in Bear Creek: shop and office electrical work, commercial generator installation, EV charger installation and generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Mobile home electrical repair in Bear Creek is manufactured-home work, not a site-built rewire
About one in five homes in this community are manufactured. This page is repair work in that product: the interior can, the underbelly chase, the listed feeder and the pedestal. A site-built house rewire and a service-size upgrade each have their own pages.
What a manufactured-home repair usually includes
- The interior can: a small load center, a directory and any heat or rust in a tight closet.
- The underbelly: belly-board, a chase and splices we will not leave in tape over a floor pan.
- The feeder: a listed manufactured-home feeder or a listed raceway, not a leftover house SEU used as a guess.
- The pedestal: a park or a lot pedestal, a cutoff and a bond we can actually see.
- The chassis: a bonding lug on the I-beam or the frame, not a random screw into sheet metal.
A HUD label, a data plate and a home we identify before we cut
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We look for the HUD label or the data plate so we know the product we are in. We will not treat a 1970s single-wide like a 1990s multi-section home, and we will not open a chase until we know where the belly board comes off.
Pedestals, a park rule and a lot we will not dig without a plan
Some parks have rules about who may open a pedestal or dig a feeder. We ask before we excavate, and we will not pull a park pedestal cap just to “have a look” if the park requires their own tech for that can.
Belly-board, a metal floor pan and a splice we remake in a listed box
Under the floor, old tape splices sit on a metal pan or against a duct. We remake those in a listed box or a listed cable, and we will not leave a new wire nut sitting on the pan.
A tip-out, a tag-along room and a feeder that was never upsized
A later tip-out or a tag-along room often sits on the original feeder. If that addition is dark or warm, we inspect the feed and the local can. We will not hide a new circuit in the belly without a path back to a listed overcurrent device.
How we warrant manufactured-home electrical repairs
Labor on the listed repair is covered two years, or five years when you are on the Member Care Plan. Parts we install carry their maker’s coverage.
Permits and a parcel that still controls the review
Manufactured-home electrical repairs can still need a permit. The parcel decides who reviews it. A park office is not a substitute for that review, and a Gulfport mailing label does not move the parcel.
A packaged AC disconnect in the weather, and a landing we will not fake
Many manufactured homes have a packaged AC unit and a small disconnect in the weather. If that can is rusted or loose, we replace a listed outdoor disconnect on a solid landing, and we will not screw a new can into a soft metal skin without backing.
Crossover cables between sections, and a bond we will not skip
On a multi-section home the crossover in the belly carries power and often a bond. We inspect that crossover when the complaint is a dead section, and we will not leave a loose bond hanging on a hitch beam.
Tight interior boxes, a plastic tub and a water heater circuit
Water heaters in these homes often sit in a small closet with a plastic overflow tub. We keep the disconnect or the receptacle reachable, and we will not bury a junction in the tub.
Our shop is about 6 miles away
We run these visits from our Seminole Blvd shop, about 6 miles from Bear Creek. Bring a clear photo of the pedestal and the interior can so we can load the right parts.
Aluminum branch, a steel chassis and a mixed joint we will not ignore
Some older manufactured homes have aluminum branch cable. We use listed connectors at those joints, and we will not twist aluminum to copper over the frame and tape it.
A 28-foot single-wide, a park street and a feeder length we actually measure
Feeder length and voltage drop matter on a long lot. We measure that run, and we will not assume a short jumper is still honest after a later move of the home on the pad.
Oval cable, a listed MH feeder and a clamp we will not substitute
We use a listed manufactured-home feeder or a listed raceway and the right clamp at the can. A house NM clamp on oval cable is a defect, not a field habit.
A tongue, a hitch beam and a bond jumper that has fallen off
The bond jumper at the hitch or the tongue is often the first thing that falls off after a move. We remake that bond, and we will not leave the frame floating.
A furnace closet, a listed disconnect and a tight louvered door
Furnace closets in these homes are tight. The disconnect has to stay reachable with the louvered door open, and we will not hide it behind the filter rack.
A skirting hatch, a belly tear and a path we will not crawl blind
We enter the underbelly at a skirting hatch or a listed access, not through a random tear. A belly tear gets a note so it can be closed after the splice is remade.
Receptacles on a thin wall panel, and a box we will not crush
Interior walls in these homes are often thin panel. We use a listed, shallow box and we will not crush a deep device can into a foam or a paper core.
A park transformer, a long lot and a voltage we measure at the can
On a long park street the voltage at the interior can can sit low. We measure it, and we will not blame a “weak appliance” before we have a number.
Smoke alarms in a manufactured hall, and a listed interconnect we respect
If the home has an interconnect between smoke alarms, we keep that interconnect when we replace a unit-owned alarm. We will not drop in a lone battery unit and break the chain.
A washer on a raised platform, and a GFCI we can still reset
Laundry in these homes is tight. The GFCI has to stay reachable from the platform, and we will not hide it behind the washer hose.
A porch add-on, a set of jacks and a landing that was never permitted
A later porch with a couple of receptacles often sits on a feeder that was never upsized. We inspect that landing, and we will not add more load on a guess.
A window AC sleeve, a dedicated receptacle and a shared lighting circuit we will not steal
A window unit in a manufactured bedroom needs a listed receptacle, not a lighting circuit. We add that landing when the sleeve is already there, and we will not steal a hall lighting circuit for it.
A metal-clad porch post and a listed weatherproof can
A porch post that is only thin metal still needs a listed weatherproof box, not a hole and a bare device.
Common questions
Can you do mobile home electrical repair near Bear Creek? Yes, in a manufactured home, at the pedestal and in the underbelly. Call or text (727) 476-7079 with photos of the can and the pedestal.
Is this the same as rewiring a site-built house? No. A house rewire has its own page. This visit is listed work in a manufactured home.
Do you also upgrade the service size? A service-size change has its own page. This URL is repair work in the home and at the pedestal.
Will a park have to approve the pedestal work? Some parks do. We ask before we open a park-owned pedestal.
What should we text first? The year if you know it, plus photos of the interior can and the pedestal, to (727) 476-7079.
Our trucks leave the shop on Seminole Blvd, about 6 miles from Bear Creek, and work near Boca Ciega Bay and Bear Creek. We also serve Pinellas Park, South Pasadena, Lealman, Treasure Island and Gulfport.
Up: Mobile Home Electrical Repair across Tampa Bay.
Call or text (727) 476-7079 for mobile home electrical repair in Bear Creek, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
