Planning light fixture installation in Tampa Bay? Keywest Lights & Electric hangs and wires ceiling, wall, vanity, porch and pendant fixtures in Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and we check the box, the support and the circuit for every fixture.
Request light fixture installation in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Light fixture installation in Tampa Bay: the fixture is the easy part
A fixture is only as good as what holds it and what powers it. We confirm that the box is rated for the weight, the wires are in good shape, the grounding is in place and the switch controls the right light. Then we hang the fixture level, aim it correctly and test it with the bulbs you chose.
Fixtures we install
- Flush and semi-flush ceiling lights: for halls, bedrooms and closets.
- Pendants and island lights: with correct drop heights.
- Vanity lights: over bathroom mirrors.
- Wall sconces: for halls, entries and bedrooms.
- Porch and entry lights: wet-rated lanterns and wall packs.
- Garage and utility lights: LED shop lights and strips.
- Track and rail lights: for kitchens and displays.
Boxes and support
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A ceiling fixture hangs from a box fastened to the framing or to a brace. Old plastic boxes can crack, and boxes meant for lights may not hold fans or heavy chandeliers. We test the support by hand, replace weak boxes and use brackets rated for the weight. A secure box is the difference between a safe fixture and a falling one.
Wet, damp and dry locations
Fixtures carry ratings for the places they can be used. Dry-rated fixtures belong indoors. Damp-rated fixtures suit covered porches and bathrooms. Wet-rated fixtures face direct rain. A wrong rating leads to corrosion, flicker and shock risk. We choose by location, and we seal the fixture to the wall or ceiling where needed.
Bulbs, color and light levels
Modern fixtures often have built-in LEDs, and replaceable bulbs vary in brightness, measured in lumens, and color, measured in kelvin. Warm light of about 2700 kelvin feels cozy, while 3000 to 4000 is neutral to crisp. We help you match bulbs across rooms so color looks consistent, and we check that dimmers work with the lamps.
Replacing old fixtures
Taking down an old fixture can reveal hidden issues: brittle wire, a missing ground, a burned socket or a leaning box. We repair these problems before the new fixture goes up. We also remove and dispose of the old unit and patch small marks around the base.
Assembly and finish
Many fixtures arrive in parts. We assemble them, set chain or rod lengths for the room’s ceiling height and adjust so that the canopy sits flush. For vaulted ceilings, we use angled adapters. For textured ceilings, we use a gasket or plate so the canopy covers any gaps.
Quotes, permits and warranty
Replacing a fixture with a like unit usually needs no permit. New locations or new circuits do. Our workmanship carries a 2-year warranty, or 5 years with a Member Care Plan.
Energy-saving and LED fixtures
Built-in LED fixtures use little power and last for years, but they cannot be re-bulbed. If the driver fails, the whole piece may need replacement. Fixtures with replaceable LED bulbs cost more up front and simplify repairs. We discuss both types, show color samples and help you choose what fits your home and your habits.
Fixtures for kitchens, baths and closets
Kitchens need bright, even light, so we mix ceiling fixtures with pendants and under-cabinet lights. Bathrooms need vanity lights placed beside the mirror, not just above it, to avoid shadows. Closets need enclosed LED fixtures that stay cool. Each room has details that matter, and we plan them with you.
Fixtures near fans, sprinklers and insulation
Some fixtures must keep distance from insulation, sprinkler heads and fan blades. Heat-rated fixtures sit near insulation, while tall pendants should clear fans and doors. We read the instructions, check clearances and adjust the layout. A fixture installed according to its label runs cooler and lasts longer.
Choosing finishes that last
Brushed nickel, oil-rubbed bronze, matte black and brass finishes each age differently. Coastal homes do better with finishes rated for damp air. Painted or powder-coated parts resist salt longer than plain plating. We recommend finishes based on location and on how much cleaning you like to do.
Quiet fans, motion sensors and smart fixtures
Some fixtures now include speakers, cameras, night lights, motion sensors or a built-in fan. Each feature draws power and may need a neutral wire, a network connection or a separate switch leg. We confirm requirements before the day of installation, so the fixture works fully, not just partly.
Common questions
Can you install a fixture I bought online? Yes. We check that it is listed, suited to the location and compatible with the circuit before we hang it.
Do you assemble fixtures? Yes. We assemble, level and adjust the fixture so it hangs correctly.
Can you hang a fixture on a high ceiling? Yes. We use ladders or scaffolds rated for the height and adjust the stem or chain length.
Why does my new fixture flicker? The bulb, the dimmer or a loose connection may be the cause. We test each one.
Can you add a fixture where there is none? Yes. We run cable through the attic or wall and install a new box and switch.
Do you remove the old fixture? Yes. We remove and dispose of it and tidy the area.
Are there rules about fixtures near showers? Yes. Fixtures in or over showers need wet or damp ratings. We choose the correct type.
Can you install several fixtures in one visit? Yes. We can update a room or a whole home at once.
Local pages: light fixture installation in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services.
Call or text (727) 476-7079 for light fixture installation in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
