Planning lanai electrical wiring in Redington Beach? Keywest Lights & Electric handles lanai electrical wiring in Redington Beach for screen enclosures, patios and covered porches, with outlets, fans, lights and TVs. We are licensed and woman-owned, we use wet-location parts, add ground-fault protection and seal every entry.
Request lanai electrical wiring in Redington Beach
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Around Redington Beach we also put in backup generator hookups, a commercial electrician, a car charger circuit and backup power for a business. Related: jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Lanai electrical wiring in Redington Beach: comfort outside, protected from the weather
A lanai is a living room with a screen. Moisture, salt and bugs hit electrical parts every day. We choose wet-location boxes and covers, protect each outlet against ground faults and route the wire so it stays out of the weather.
What we wire on a lanai
- Outlets: for chargers, speakers and small appliances.
- Ceiling fans: wet-rated and securely braced.
- Lighting: recessed, wall and string light circuits.
- TV and audio: clean, protected power.
- Heaters and misters: circuits sized for the load.
- Outdoor kitchen links: feeds for a grill island.
Wet-location parts
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A damp-rated device is made for protected places, while a wet-rated one is made for rain. We choose the type that suits the exposure and use in-use covers that close over a plug.
Ground-fault protection
Outdoor outlets must be protected against ground faults. We use a protected outlet or a breaker, and test it after the install.
Fans that handle humidity
A lanai fan runs in damp air and needs a wet or damp rating and a brace that can hold its weight. We choose a fan that fits the space and wire it with a proper box.
Lights for evening use
We add layers of light so you can dine, read and entertain. Dimmers, warm color and shielded fixtures keep bugs and glare down.
Screen enclosure basics
A screen enclosure has aluminum framing. We bond metal parts where needed and keep wire away from sharp edges and sun.
Running cable the right way
We choose conduit or outdoor-rated cable, fasten it and seal each wall entry. Cable never rests in water, and we add drip loops at the box.
Bugs and sealing
Insects love small gaps. We seal around boxes and conduit so they do not nest inside.
Salt air and corrosion
Water covers roughly 73 percent of the town. We use corrosion-resistant boxes, covers and screws, because plain steel can rust within a season.
Storm preparation
Light fixtures and wires can whip in wind. We secure each part and, where useful, add a switch or breaker to cut power to the lanai during a storm.
Older homes
The middle home by age here went up around 1959. A lanai added later may have old wire, loose boxes or no ground-fault protection, and we update them.
Electric heat and cooling
Nearly every home uses electric heat. A lanai heater or a portable cooler adds load, so we check that the circuit and the panel can handle it.
Condos and balconies
About one home in four is in a building with ten or more units. We follow the building’s rules for balcony and lanai work and keep wire within what is allowed.
Seasonal homes
About one in five units here is seasonal. We can set up a timer or smart switch so lights come on at dusk while you are away.
Aging in place
Many residents are retirees. Good lighting at steps and a switch at the door make a lanai easier to use and safer after dark.
Speakers and low-voltage wiring
We can run speaker wire and low-voltage cable in a way that stays safe near power wiring and out of water.
Pool and spa adjacency
A lanai near a pool or spa has extra rules on distance, bonding and protection. We follow the rules and test each device.
Outdoor kitchens
If a grill island is nearby, we can run a dedicated circuit and add lights and outlets. See our outdoor kitchen electrical page.
Adding a subpanel
A big lanai project may need its own subpanel. We size it to the load and place it where it is protected from the weather.
Smart controls
Weather-resistant smart switches can run lights and fans by app or timer. We install them where signal and wiring allow.
Permits
New circuits for a lanai need a permit and an inspection, while a simple fixture swap may not. You will know before we start what the filing involves and handle the paperwork.
Anchoring boxes to aluminum framing
Screen frames are thin. We use proper fittings and backing plates so a box or fan stays firm and the frame is not weakened.
Hose-down and sprinkler exposure
A lanai floor is often washed with a hose. We place outlets high enough and use covers that shed spray, so water is not drawn into the box.
Ceiling height and fan clearance
A fan needs room for its blades and for people to walk beneath. We measure before we choose a size and a mounting style.
Lighting near screens
Light that shines on screens attracts insects. We aim fixtures down and choose a warmer color that bugs find less appealing.
Heat lamps and misting lines
Heaters and misters need steady power and a safe distance from screens and furniture. We size the circuit and place each device according to its instructions.
Surge protection for outdoor electronics
TVs and speakers on a lanai are exposed to storms. We suggest a surge device and a cover for the equipment, and we install both.
Planning for later additions
A little extra conduit now makes it easier to add speakers or a spa later. We leave a pull string and a labeled spare line when the layout allows.
Warranty
Each job comes with a 2-year labor guarantee. A Member Care Plan extends it to 5 years.
Before we arrive
Clear furniture from the work area and show us where you would like outlets, fans and lights.
Safety first
Never use an indoor extension cord across a wet lanai floor or leave a plug in the rain. If an outlet is wet or warm, shut off its breaker and call us.
After the work
We test each device, check covers and leave a short note about what we installed.
Common questions
Do lanai outlets need special covers? Yes. Outdoor outlets need weatherproof in-use covers and ground-fault protection.
Can you add a ceiling fan to a lanai? Yes. We use a fan rated for damp or wet air and a box that can support it.
Does lanai wiring need a permit? New circuits usually do. Simple swaps often do not.
Our trucks leave the shop on Seminole Blvd, about 2 miles away, and work near Gulf Boulevard and the Intracoastal Waterway. We also serve Indian Shores, North Redington Beach, Madeira Beach, Bay Pines and Redington Shores.
Up: Lanai Electrical Wiring across Tampa Bay · For everything we do locally, see Redington Beach electrical service.
Call or text (727) 476-7079 for lanai electrical wiring in Redington Beach, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
