Need lanai electrical wiring in Tampa Bay? Keywest Lights & Electric wires lanais, screened porches and Florida rooms across Pinellas, Hillsborough and Pasco counties. We are a woman-owned contractor under license EC13014717, and every job uses wet-location parts, ground-fault protection and a permit where one is required.
Request lanai electrical wiring in Tampa Bay
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Lanai electrical wiring in Tampa Bay: power for the room between indoors and out
A lanai is where Florida families live most of the year. It holds a ceiling fan, a TV, a mini fridge, a grill cart and string lights. Yet many lanais were wired as an afterthought, with one old outlet and an extension cord. Good lanai wiring treats the space as a damp room: sealed boxes, ground-fault protection and cable that can handle humidity, bugs and salt air.
What a lanai circuit needs
- Ground-fault outlets: protection against shock where moisture is common.
- In-use covers: deep bubble covers that close over a plugged-in cord.
- Wet-rated fans: blades and motors made for damp air.
- Dedicated lighting circuit: so a tripped outlet does not leave you in the dark.
- Weatherproof switches: sealed plates or switches placed inside the house wall.
- Right cable: cable approved for wet or damp locations.
Screened lanai versus enclosed Florida room
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A screened lanai is open to wind-driven rain, so everything must be rated for wet locations. A glass-enclosed Florida room is drier but still sees steam, condensation and temperature swings. We match the parts to how the room is really used and say so in plain words before we start.
Ceiling fans and lighting
Lanai fans must be rated for damp or wet use and braced to a box made for fan weight. We install the box, wire a separate fan and light control and check for wobble. Lighting can be recessed wet-rated cans, sealed wall lights or soft strings under a covered ceiling. We place switches where you reach them on the way out the door.
Outlets for grills, TVs and fridges
Outdoor kitchen gear, mini fridges and televisions all pull steady power. We count the loads, set aside a circuit for the heavy ones and place outlets at counter height and near seating. Cords stay off the floor, and every receptacle gets ground-fault and weather protection.
Pool and spa neighbors
Many lanais open onto a pool. Bonding, distance rules and ground-fault protection matter more near water. We check where equipment, lights and outlets sit relative to the pool edge and fix anything that is too close or lacks protection. We wire pool equipment as a separate, carefully bonded job.
Running power from the house
New lanai circuits start at the main panel or a subpanel. We find a path through the attic, the wall or a slab sleeve, and we avoid cutting screen frames. Where the panel is full, we add breaker space or a subpanel. All cable is secured and protected from damage.
Heat, humidity and corrosion
Salt air and humidity corrode ordinary hardware in a few seasons. We use stainless or coated screws, sealed connectors and gasketed covers. Boxes face downward where possible so water does not pool. A little care now saves frequent repairs.
Safe lighting for evening use
Steps, grill zones and doorways need clear light. We aim fixtures so they do not glare into eyes or neighbors’ windows. Motion sensors help for late-night trips. Dimmers rated for the fixture keep the mood relaxed.
Bug lights, speakers and heaters
Low-power add-ons are common. Bug zappers, outdoor speakers, misting systems and patio heaters each have their own supply needs. We confirm the rating of each before connecting it and keep wiring tidy so a screen repair does not hit a cable.
Inspections, permits and records
New circuits and panel changes usually need a permit and an inspection. We pull it, meet the inspector and leave you with a labeled panel. Our workmanship carries a 2-year warranty, or 5 years with the Member Care Plan.
Why choose Keywest Lights & Electric
We are licensed, insured and woman-owned, and our crews explain the plan before opening a wall. You get a clear scope, neat work and a lanai that is ready for the next cookout. Call or text (727) 476-7079 to talk through your project.
Planning your lanai project
Walk the space and list what you want to plug in. Note where you sit, where the door swings and where the screens attach. Think about a future outdoor kitchen or TV wall, since adding conduit now costs less than opening finished walls later. We bring that list to our visit and mark the plan on a simple sketch.
Weather and storm preparation
Lanai equipment sees the first blast of a storm. We suggest surge protection at the panel, flip-down covers on outlets and an easy way to switch off the whole lanai circuit. After heavy rain, check covers for cracks and look for water in fan canopies.
Common questions
Does a lanai need ground-fault outlets? Yes. Outlets in damp or wet locations need ground-fault protection, and we install it as part of every job.
Can I use a regular ceiling fan on my lanai? Only if it is rated for the location. Damp- or wet-rated fans last longer and are safer.
Do I need a permit for new lanai outlets? New circuits usually do. We pull the permit and schedule the inspection for you.
Can you add power to an existing screened lanai? Yes. We route cable through the attic or wall and avoid damaging screens.
How many outlets should a lanai have? It depends on use, but most families want an outlet at each seating area, one for cooking gear and one for cleaning tools.
Can you add lighting and a fan on separate switches? Yes. Separate control gives you more flexibility and keeps wiring neat.
Do you install outdoor kitchens? We handle the electrical side, in coordination with your builder.
Do you serve my area? We serve Pinellas, Hillsborough and Pasco counties. Call or text (727) 476-7079 to confirm.
Local pages: lanai electrical wiring in Seminole, our home base. See also Pinellas County, Hillsborough County and Pasco County service areas, or browse all electrical services.
Call or text (727) 476-7079 for lanai electrical wiring in Tampa Bay, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
