Have an old Stab-Lok or Zinsco panel? Ask about Federal Pacific panel replacement in Seminole. Keywest Lights & Electric removes Federal Pacific and Zinsco panels and installs new ones in Seminole homes. We are licensed and woman-owned, with our shop on Seminole Blvd. These panels are known for breakers that may not trip when they should, which is why insurers and inspectors single them out.
Request Federal Pacific panel replacement in Seminole
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
On the same streets, we also handle commercial electrician calls, EV charger installation, generator installation and permanent Christmas lights. Related: commercial generator installation.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Federal Pacific panel replacement in Seminole: why it matters
A breaker is the last line of defense against an overloaded or shorted wire. Tests and field reports on certain older panels, including Federal Pacific Stab-Lok and Zinsco, show that breakers can fail to trip. When that happens, wires can overheat inside walls. Many insurers decline coverage for homes with these panels, and many inspectors flag them.
How to spot them
- Name on the door: Federal Pacific, FPE, Stab-Lok, Zinsco on the label.
- Breaker shapes: narrow, thin handles with a molded logo.
- Age: most were installed from the 1950s through the early 1980s.
- Behavior: breakers that will not reset, run warm or never seem to trip.
- Burn marks: dark spots at breaker slots or the bus bar.
What replacement involves
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We shut down power, remove the old panel, and install a new panel, breakers and a surge device, then reconnect each circuit. Many homes also need updated grounding and bonding, new labels and corrected double taps. The old panel goes out of the house, and we leave a labeled directory for the new one. The power company disconnects and reconnects at the meter, as the permit requires.
Time and disruption
Most replacements take one working day. Power is off for much of that time. We tell you the schedule ahead and plan for refrigerators, medical devices and work-from-home needs. Many owners go out for the day. We leave the work area clean.
Seminole homes
About 28% of Seminole homes were built in the 1970s, and the median home dates to 1979. That is the period when these panels were common. Many local houses have been resold, remodeled and re-insured, and the panel is often one of the first items insurers ask about. Replacing it can open up coverage and bring peace of mind.
Options for the new panel
A standard panel with ground-fault and arc-fault breakers is the usual answer. Some owners choose a smart panel that shows each circuit’s use and lets them shed loads in a storm. We explain the trade-offs and match the panel to your plans for EV charging, solar or a generator.
Permits and inspections
Panel replacement needs a permit and an inspection. We prepare the paperwork, schedule the inspection and coordinate with the power company. A passed inspection is on the record, which helps with insurance and resale.
Warranty and care
Our workmanship carries a 2-year warranty, or 5 years with a Member Care Plan. Call or text (727) 476-7079.
What testing and field reports show
Studies of older panels from these makers found breakers that did not trip at their rated current, and some Zinsco designs can fuse to the bus bar so that a breaker cannot open. Most failures do not cause a fire, but the risk is real and cannot be seen from outside. That is why replacement is the common answer instead of repair.
Reading the panel label safely
Do not remove the cover on a live panel. Look at the label on the door or the front, which often shows the maker, the amp rating and the year. Take a photo and send it to us at (727) 476-7079. We can often tell from the photo whether the panel is on the list that insurers flag, and we can book a visit to confirm.
Service upgrades at the same time
Many older homes have 60 or 100 amp service. If you plan an air conditioner, an induction range, an EV charger or a heat pump water heater, a larger panel makes sense. Replacing the panel and upgrading the service at once saves a second shutdown and a second permit. We size the new equipment from a load calculation and leave room for future circuits.
Wiring behind the old panel
When the old panel comes out, we see the wires that were hidden behind it. Often there are double taps, undersized wires on large breakers or cut-down conductors that are now too short. We fix these during the swap. We also confirm that the grounding electrode is in place and that the neutral and ground are bonded only at the service.
Keeping paperwork for insurance
After the inspection, we give you the permit record, a photo of the new panel with its label and a letter that states the old panel was removed. Many insurers accept this and update the policy. If the agent needs a particular form, send it before the job so that we can complete it with the right details.
Questions to ask before you hire
Ask whether the electrician is licensed in Florida, whether the quote includes the permit and inspection, and whether the new panel gets a printed directory. Ask who handles the meter disconnect. Ask what happens if hidden damage turns up behind the old panel. Clear answers up front prevent surprises on the day of the work.
Common questions
Is my Federal Pacific panel dangerous? It may be. Breakers in these panels have been shown to fail to trip in some cases. Replacement removes the risk.
Will insurance require replacement? Many insurers do. Ask your agent, and we can supply a letter after the work.
Can I replace only the breakers? Replacement breakers for these panels are not a safe answer. The panel itself is the issue.
How long is the power off? Usually most of one working day.
Do you handle the power company paperwork? Yes. We coordinate the disconnect and reconnect as part of the permit process.
Our trucks leave the shop on Seminole Blvd and work near Boca Ciega Bay, Lake Seminole Park, Seminole City Center, 113th Street North, Starkey Road. We also serve South Pasadena, Kenneth City, Belleair Bluffs, Largo, Madeira Beach, Bardmoor, Bay Pines and Pinellas Park.
Up: Federal Pacific Panel Replacement across Tampa Bay · For everything we do locally, see Seminole electrical service.
Nearby: Bay Pines · Madeira Beach · Redington Beach · North Redington Beach
Call or text (727) 476-7079 for Federal Pacific panel replacement in Seminole, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
