150A Service Upgrade – Clearwater FL

Request a quote in 150A Service Upgrade Clearwater.

Tell us what you need and where you are. A licensed electrician will call or text you back to set a time. For an emergency, call (727) 476-7079, 24/7.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

What does a 150-amp service upgrade in Clearwater look like? Here is how Keywest Lights &amp. Electric, a woman-owned contractor licensed EC13014717, handled one. Owners live in about 58.6% of Clearwater homes (Census ACS).

Clearwater, FL. 150A service upgrade. Residential Service.

An old exterior service with a separate meter and a corroded panel replaced with a new meter/main combo. New conduit up the wall and a cleanly labeled panel. Here is the before and after from this electrical service upgrade job in Clearwater.

Outgrowing your electrical service, like this Clearwater home? Call (727) 476-7079 (24/7 for emergencies) or book a load check. See electrical service upgrades.

The problem.

The home’s old exterior service had a separate meter and panel on the wall. Inside the old panel. The breakers were corroded and the wiring was tangled and packed into the enclosure. It was time to upgrade the service.

What we did.

  • Upgraded the home to 150A service.
  • Installed a new meter/main combo on the exterior wall in place of the old separate meter and panel.
  • Ran new conduit up the wall from the new meter/main combo.
  • Labeled the circuits in the new panel.

Before & after.

Electrical service upgrade in Clearwater, FL – before: the old exterior service, with a separate meter and a closed panelBefore
The old exterior service, with a separate meter and a closed panel
Electrical service upgrade in Clearwater, FL – after: the new meter/main combo, with new conduit running up the wallAfter
The new meter/main combo, with new conduit running up the wall
Electrical service upgrade in Clearwater, FL – before: inside the old panel, with corroded breakers and tangled wiringBefore
Inside the old panel, with corroded breakers and tangled wiring
Electrical service upgrade in Clearwater, FL – after: inside the new meter/main combo, with the circuits labeledAfter
Inside the new meter/main combo, with the circuits labeled
Electrical service upgrade in Clearwater, FL – during: the new meter/main combo and conduit installed, before the meter was set
During: the new meter/main combo and conduit installed, before the meter was set

The result.

A clean, modern 150A service. A new meter/main combo with new conduit. And organized. Labeled circuits in place of the corroded equipment.

Also useful: buying an older home: electrical checklist. checks after a nearby lightning strike.

Why this Clearwater service was rebuilt as a meter-main.

The old arrangement split the meter and the panel into two boxes on the same exterior wall. That left a tight, corroded interior and a weather-beaten can. Combining the meter and the main in one enclosure cut the number of outdoor joints. Gave the new breakers a clean landing. Let us run a new conduit straight up the wall instead of reusing the tired path.

One hundred fifty amps was the size this house actually needed once the existing load was counted. The directory was labeled before we left. Because a later owner or an inspector should not have to guess which breaker feeds which room. The work was done by Keywest Lights &amp. Electric, licensed EC13014717, from the shop at 6248 Seminole Blvd in Seminole.

Coastal air in Clearwater is hard on steel and on loose terminations. We treat an exterior service as a weather job, not only a capacity job. Tight fittings, a true close on the cover. And a photo record of the finished landing. Permits are pulled when the service change requires them. And we meet the inspector at the new can. Workmanship is two years, or five with a Member Care Plan.

What the Clearwater photo set actually shows.

The first exterior frame is the old split. A meter on one side of the wall and a tired panel on the other. Corrosion already visible at the cover. The matching after frame is the new meter-main combo. A fresh conduit riser and a cover that closes on a single enclosure.

The interior before shot is the reason the service could not stay. Breakers eaten by corrosion and conductors packed in a tangle that left no room to land a new circuit honestly. The interior after shot is the same job with a labeled directory and space to work. A fifth frame shows the combo and the conduit in place before the utility meter was set. Is the usual pause while the socket is approved and the meter is installed.

If you are planning a similar upgrade. The useful photos to send ahead are the exterior wall. The inside of the existing can, and the main-breaker rating. We will still count the load in person before we recommend 150 amps or some other size. A written quote follows that visit, not the photo set alone.

After the meter is set. We do a final pass on torque at the lugs, the bond, and the directory. If a branch was moved during the changeover. Its label is updated the same afternoon rather than left as a pencil note inside the door.

Typical hardware on a service like this includes a raintight hub. A bonding bushing. An offset nipple where the conduit leaves the knockout. Lugs torqued to the printed value on the can. We do not reuse a rusted concentric knockout or a crushed connector just to save a step.

Common questions about service upgrades.

Why replace a separate meter and panel with a combo? A meter-main combo reduces the outdoor hardware. Shortens the service path. And gives the new breakers a single, labeled enclosure. On this Clearwater wall. It also let us retire a corroded interior instead of trying to reuse it.

Did the 150-amp size come from a catalog, or from this house? From this house. We count the circuits and the planned load, then pick a rating that fits. A larger service is only recommended when the numbers call for it.

Who installs the meter after your combo is on the wall? The power company sets the meter in the new socket after the inspection step that applies to that address. Our job is the enclosure, the feeder, the labeled breakers, and the conduit riser. We plan the pause so the house is not left without a path back to power.

Will my landscaping or stucco need a patch where the old panel came off? Often a paint or stucco touch-up is needed around the old footprint. We keep the new combo orderly and photograph the wall. Cosmetic patching of siding or stucco is usually the owner’s painter or mason after we leave.

How do I know if my home needs a service upgrade? Common signs are a full panel. Plans for an EV charger, pool or addition, or breakers that trip under normal loads. We run a load calculation to confirm.

Who coordinates with your utility? We do. Including the disconnect and reconnect for the service change.

Should buyers check the service size before closing? Yes. If you plan big new loads. See our electrical checklist for buying an older home.

Related services: panel upgrade and replacement. EV charger installation. more projects.

Licensed, insured and warranted.

  • Florida-licensed electrical contractor, license EC13014717.
  • Licensed under EC13014717 and insured; we’ve handled service upgrades for Pinellas homeowners since 2010.
  • Every job carries our 2-year workmanship warranty.

Get an itemized quote.

The meter base, grounding and panel all change the scope. So we quote after a visit and list each part separately.

(727) 476-7079, emergencies any hour. Request a service upgrade visit.

Related: Electrical Service Upgrades. Electrician in Clearwater, FL. All projects.

Call or text (727) 476-7079 to set an appointment for a Clearwater 150-amp walkthrough. After we count the load in person we send a written proposal. We pull the permit when the service change requires it. This house needed one hundred fifty amps. Rebuilt as a meter-main with a new conduit riser. Then a final torque pass on the lugs after the utility meter was set.

We take on projects up to $2 million and carry $1 million in bonding.

The Census American Community Survey figure already on this page is that owners live in about 58.6 percent of Clearwater homes, which is an owner-occupied share just over half.

The old service was a split arrangement: a separate meter and a corroded panel. A combination meter-main replaced those two boxes with one enclosure, and the corroded, tangled interior was retired rather than reused.

Coastal air is hard on steel and on loose terminations, so this exterior service was treated as a weather job, with tight fittings and a cover that actually closes.

Typical hardware already listed here includes a raintight hub, a bonding bushing, an offset nipple at the knockout, and lugs torqued to the printed value.

The power company sets the meter in the new socket after the inspection that applies to that address; we plan that pause so the house has a path back to power.

If landscaping or stucco needs a touch-up where the old panel came off, that finish work is not part of the electrical landing photographed on this page.

A fifth photo shows the combo and the conduit riser in place before the meter was set, which is the usual hold while the socket is approved.