Want a thermal imaging electrical inspection in Bay Pines? Keywest Lights & Electric provides thermal imaging electrical inspection in Bay Pines for homes, condos, shops and buildings with many units. We are licensed and woman-owned, and we scan panels, breakers, disconnects and connections with an infrared camera, then explain each hot spot in plain words.
Request thermal imaging electrical inspection in Bay Pines
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Other work we do in Bay Pines: a standby generator, a car charger circuit, a commercial electrician and backup power for a business. Crews here also do jellyfish lighting and panel upgrade replacement.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Thermal imaging electrical inspection in Bay Pines: see heat before it becomes a failure
A loose connection or an overloaded breaker gets warmer than its neighbors long before it fails. An infrared camera shows that heat as color, so we can spot trouble without opening walls. In a community where the typical home dates from around 1970 and salt air speeds up corrosion, a scan is a smart way to check aging equipment.
What we scan
- Main panels and subpanels: lugs, bus bars and breaker bodies.
- Service equipment: meter base, main disconnect and riser.
- Air conditioner disconnects: whips, fuses and contactors.
- Motor circuits: starters, drives and disconnects.
- Switchgear in buildings: feeders and branch panels.
- Outlets and devices: warm plates and loose terminals.
- Generator and transfer equipment: connections under load.
How a scan works
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
The camera reads surface temperature. We run the system under normal load, open the covers safely and take images of each connection. We compare similar parts, such as three phases or neighboring breakers, since a difference of several degrees points to a problem.
Why load matters
A connection can look fine when the building is quiet. Heat shows up when current flows, so we schedule scans during normal use, such as a warm afternoon with the air conditioner running.
Reading the image
A bright spot is not always a fault. Reflections, fans and shiny metal can fool the eye. We check suspicious areas with a contact meter and a clamp meter, so we report real findings and not false alarms.
Common findings
Loose lugs, oxidized aluminum conductors, overloaded breakers, unbalanced phases and worn contactors are the most common causes. We note the temperature rise, the location and the likely cause for each one.
The written report
You receive thermal and visible-light images side by side, the readings, a priority rating and a recommended fix for each finding. Keep the report as a baseline for the next scan.
Insurance and lenders
Insurers and lenders sometimes ask for proof that equipment is in good shape. A thermal report shows that a licensed electrician looked closely, which can ease questions about aging panels.
Condos, associations and boards
Building boards use scans to plan repairs and avoid surprise outages. We scan house panels, meter rooms, pumps and elevator disconnects, then give the manager a ranked list.
Homes with older wiring
Aluminum branch wiring, tired panels and old disconnects may warm up. A scan shows which ones need attention and which can wait, so you spend effort where it counts.
Businesses and kitchens
Restaurants, shops and clinics rely on steady power. We scan between busy hours, keep the work quiet and leave the area clean.
Fixing what we find
Many fixes are small: tighten a lug, clean a contact, swap a breaker or rebalance a load. We can make the repair during the visit, or quote it, whichever you prefer.
Follow-up scans
After a repair, a second scan confirms that the heat is gone. Many owners schedule a yearly scan before summer to catch problems before the hot season.
Permits and safety
A scan itself needs no permit. If a repair needs one, we tell you and handle the paperwork. We follow safe work practices around live equipment and use protective gear.
Seasonal timing along Boca Ciega Bay
Summer heat pushes every cooling circuit hard, so July and August scans reveal weak spots that spring scans miss. Many owners near the bay book a visit in late May. That way a worn contactor or tired lug is fixed before the hottest weeks arrive.
Sealed meter bases and corrosion
Salt moisture creeps into meter bases and disconnects. Green or white powder on copper is a hint. A scan often shows the extra heat that corrosion creates, and we clean or replace the part before it fails.
Battery, solar and charger equipment
Home batteries, inverters and car chargers run for hours at a steady load. Their wiring deserves a scan after the first months of service, because a poorly torqued lug warms slowly under constant current.
Camera settings and accuracy
Surface type changes what a camera reads. Painted metal, bare copper and plastic each reflect differently. We set emissivity for each surface, use a reference tape on shiny bars and record ambient temperature.
What the report ranks
Findings are grouped as urgent, soon and watch. An urgent item is a large rise that needs a fix right away. A watch item is a small rise that we photograph for comparison at the next visit.
Records that follow the building
Managers can file each report with maintenance logs, which shows trends from year to year and makes budgeting calmer.
Warranty
We stand behind our workmanship for 2 years, or 5 years with a Member Care Plan.
Before we arrive
Make sure panels are reachable and that the building will be running normally. Tell us about any past trips, flicker or odor.
Common questions
How long does a thermal scan take? Most homes take about an hour, and larger buildings take longer.
Does a scan replace a regular inspection? It adds to one. A scan shows heat, while an inspection checks code and condition.
Can a scan find every problem? It finds heat-related faults under load. We also test and inspect for other issues.
Our trucks leave the shop on Seminole Blvd, about a mile away, and work near Boca Ciega Bay, Seminole Boulevard, Long Bayou and Bay Pines Boulevard. We also serve Indian Shores, Redington Shores, Kenneth City, Largo and Madeira Beach.
Up: Thermal Imaging Electrical Inspection across Tampa Bay · For everything we do locally, see Bay Pines electrical service.
Nearby: Seminole
Call or text (727) 476-7079 for thermal imaging electrical inspection in Bay Pines, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
