Planning kitchen remodel electrical in Bay Pines? Keywest Lights & Electric handles kitchen remodel electrical work in Bay Pines, from new counter outlets to island power and range circuits. We are licensed and woman-owned, and we coordinate with your cabinet and counter crews.
Request kitchen remodel electrical in Bay Pines
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
In Bay Pines, we also take panel upgrades, home EV charging, a standby generator and JellyFish eave lighting.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Kitchen remodel electrical in Bay Pines: plan power before the cabinets
A kitchen is the hardest-working room in the house. It runs the refrigerator, the range, the dishwasher, the microwave and a long list of small appliances. A remodel is the time to give each load a proper circuit and to add lighting that makes the room easy to use.
What a kitchen remodel may need
- Counter outlets: ground-fault protected, spaced to code.
- Small-appliance circuits: at least two for the counters.
- Island power: outlets in or on the island.
- Dedicated circuits: refrigerator, dishwasher, disposal, microwave.
- Range or cooktop: 240-volt circuit and cable.
- Lighting: recessed lights, pendants and under-cabinet strips.
Homes from the 1970s
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
The median Bay Pines home dates to 1970. Kitchens from that era often have one or two circuits for everything. A new kitchen with an air fryer, a coffee maker and an induction range needs more. We add circuits and check the panel.
Counter and island outlets
Outlets sit along the counter at regular spacing, and an island needs at least one. We mount them where they are useful and where the cabinet maker can hide them. Pop-up outlets and drawer outlets are popular.
Lighting layers
Ceiling lights give general light. Under-cabinet strips light the counter. Pendants add style over an island. We put each layer on its own switch and add dimmers for comfort.
Range and oven circuits
A new range may need a larger cable and a different outlet than the old one. A wall oven and a cooktop each have their own wiring. We read the installation sheet and match the circuit.
Range hoods and vents
A hood needs power and sometimes a light switch. We run the wire to the right height and confirm the vent path with your contractor.
Gas to electric conversions
Many owners switch from gas to induction. That adds a 240-volt circuit and a larger breaker. We confirm panel space before you order the range.
Condos and villas
A kitchen in a condo may have rules for noise hours and shared walls. We follow them. Wire runs often travel through a concrete wall or a chase, so we plan routes with care.
Working with your contractor
We attend a layout meeting, mark box locations and set a schedule for rough-in and trim. We keep the refrigerator powered with a temporary circuit during demolition when possible.
Final trim
At the end we install devices, fixtures, switches and the range hookup, and we test everything. You get a labeled panel and a short list of what changed.
Planning from the appliance list
Before choosing outlets, we list every appliance: refrigerator, range, hood, dishwasher, disposal, microwave, coffee maker, toaster, air fryer and mixer. We note the nameplate load and decide which items need their own breaker. Then we draw a simple plan that you and the cabinet maker can both read.
Backsplash, pop-up and drawer outlets
Outlets can hide in a backsplash rail, pop up from the counter or sit in a drawer that charges tablets. Each has a size and a depth, and the cabinet shop must leave space. We bring samples when you want to choose a style.
Pantry, coffee bar and appliance garage
A coffee bar or an appliance garage adds a cluster of plugs in a small space. We use a dedicated circuit, add a switch for the lights and make sure a stray cord cannot pinch in a door.
Cabinet lighting and toe-kick strips
Strips under the upper cabinets light the counter, and a low strip under the base cabinets guides night-time steps. We choose drivers that hide in a cabinet, dimmers that match and wire paths that do not show.
Ground-fault protection and wet zones
Counter outlets near the sink need ground-fault protection, and we test each one after the countertop goes in. Dishwasher and disposal circuits need protection too, depending on the code in effect when the permit is issued.
Panels, load and the air fryer era
Today’s kitchens use more devices than those built fifty years ago. A single counter circuit cannot carry a toaster oven, an electric kettle and a blender at once. We total the loads and often add two or more counter circuits, plus separate lines for the microwave and dishwasher.
Under-sink and garbage disposal wiring
Cabinets under sinks hold the disposal, the instant hot unit and sometimes a water filter. Each may need an outlet or a switch. We place them inside the cabinet at a height that avoids drips, and add a switch where a hand can reach it.
Hood lights, fans and make-up air
A strong hood fan can pull air from the house. We wire the hood and discuss with your contractor whether make-up air is needed. A quiet fan runs more often, which keeps grease off cabinets.
Task lighting for the sink, stove and prep area
Light should fall on the work, not on the cook’s shadow. We place recessed cans in front of the work line, add a light over the sink and set pendants high enough to avoid glare. Dimmers let the room shift from cooking to dining.
Islands with sinks, cooktops and seating
An island that holds a cooktop needs a feeder in conduit under the slab or a chase through the cabinets. A bar seat wants a plug within reach and a pendant at the right height. We coordinate with the plumber so drains and cables do not collide, and we label every run before the stone is set.
Wall ovens, warming drawers and wine fridges
Built-in appliances come with cutout sheets and cable lengths that vary by brand. We read each sheet, place the junction box where the sheet shows and leave enough slack so the unit slides in without strain. Wine coolers and ice makers get a dedicated plug behind the cabinet.
Common questions
How many circuits does a kitchen need? At least two for the counters, plus dedicated circuits for major appliances.
Can you add an island outlet? Yes, in the island or on its side, as the code allows.
Can you wire an induction range? Yes, with a 240-volt circuit.
Do I need a permit? Usually yes. We handle it.
Can you work with my designer? Yes.
How long does the electrical take? Often two to four visits across the project.
Our trucks leave the shop on Seminole Blvd, about a mile away, and work near Seminole Boulevard, Bay Pines Boulevard, Boca Ciega Bay and Long Bayou. We also serve Pinellas Park, Redington Beach, Largo, Indian Shores and Madeira Beach.
Up: Kitchen Remodel Electrical across Tampa Bay · For everything we do locally, see Bay Pines electrical service.
Nearby: Madeira Beach · Redington Beach · North Redington Beach · Bardmoor
Call or text (727) 476-7079 for kitchen remodel electrical in Bay Pines, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
