Need fuse box replacement in South Highpoint? A tired 1970s fuse can, a listed breaker panel in its place and a service that can carry the new can is fuse box replacement in South Highpoint from Keywest Lights & Electric. We come from the Seminole Blvd shop, a drive of about 7 miles. The company is licensed and woman-owned.
Request fuse box replacement in South Highpoint
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Work we already do in South Highpoint includes business electrical work, commercial generator installation, a home EV charger, backup generator hookups, an interlock kit, JellyFish eave lighting, a panel upgrade, permanent eave lighting and a new 240-volt receptacle.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Fuse box replacement in South Highpoint is a listed breaker panel in place of the fuse can, not a main-breaker swap alone
This work is the replacement of a fuse can with a listed breaker panel: the can, the landing of the existing branch circuits, and the service or feeder that supplies it. A main-breaker replacement in an already-listed panel, a meter-base change and a whole panel upgrade each have their own pages when that is the real scope. We stay with the fuse-can replacement.
Mid-1970s fuse cans that still sit in a hall closet
Some houses and two-family units here still have a fuse can in a hall closet or a garage wall. We plan a listed breaker panel that fits that space, or we say the space has to change. We do not leave Edison-base fuses as a long-term plan when you asked for a listed breaker panel.
Branch circuits that have to land honestly
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Every branch we land has to match a listed breaker and a listed landing. We do not double-land two circuits under one screw. A messy, unmarked landing is not a finished panel.
Service size before the new can goes up
A larger panel does not automatically mean a larger service. We check the service and the feeder first. If the service has to change, that becomes part of the plan, and we say so. We do not hang a large empty panel on a service that cannot carry what you want to add.
Tenant closets and a can the owner must approve
In a two-family building the fuse can may serve one unit or both. We wait for the owner or the office before we change it. We work only on the can we were hired to replace, and we keep the other unit’s power in a listed, planned condition during the work.
Manufactured-home services and a factory can
A manufactured home may have a factory main and a small can. We replace a listed, failed can with a listed panel that fits that service, or we say the factory service has to change. We do not treat a manufactured service as a house panel without looking at it.
What this page will not include
We do not act as the power company, and we do not name that company here. No invented reviews, prices or counter titles belong on this replacement page. A meter-base replacement and a weatherhead repair have their own pages when that is the failed part.
A panel directory you can actually use
When we finish, you get a directory that matches the breakers we landed. Keep it on the door. An unmarked panel is not a finished replacement.
Paperwork on a fuse-can replacement
Replacing a fuse can with a listed breaker panel almost always needs forms. We complete those forms when they are required and we remain for the inspection. The lot is unincorporated Pinellas even when the envelope reads Largo.
Coverage on the new panel work
The new panel, the breakers and the landings we install carry two years of workmanship coverage. Membership in the Member Care Plan at /member-care-plans/ stretches that coverage to five years. A branch we never opened in the house, or a part we never landed, stays outside coverage.
Edison-base adapters we will not leave behind
Edison-base adapters that turn a fuse socket into a breaker-like device are not a replacement for a listed panel. We remove them when we replace the can. We do not leave adapters in a “temporary” socket and call the can modern.
A rusted gutter and a wet closet
A rusted gutter or a wet closet wall can ruin a new panel early. We fix the wet path or we relocate the panel to a listed dry location if that is the honest plan. A new panel on a wet wall is not a finished replacement.
Aluminum branch landings we will treat as their own method
Mid-1970s houses here can have aluminum branch cable. We use listed breakers and listed connectors for that cable. We do not land aluminum under a breaker that is not listed for it.
A tight closet that cannot take a wider can
A tight hall closet may not take a wider modern panel and still leave working space. We measure first. If the closet cannot take it, we plan a listed location that can. A panel you cannot stand in front of is not a finished install.
A screw-in fuse that has been jumped with a penny
A screw-in fuse that has been jumped with a penny or a foil wrap is a reason to replace the can, not a reason to keep using it. We pull that bypass and we move the house to a listed breaker panel. A jumped fuse is not a finished repair.
A 60-amp service we will not hide behind a 200-amp empty can
A 60-amp service behind a large empty can can confuse the next person. We size the new can honestly, or we clearly label the service size. We do not hang a 200-amp empty can on a 60-amp service and leave the directory silent.
A rusted water line over the can
A rusted water line over the can can drip into the new panel. We relocate the panel or we have the drip fixed before the new can goes up. A new panel under an active drip is not a finished replacement.
A fed-through lugs kit we will only use if it is listed
Some replacements need listed feed-through lugs for a second can. We use a listed kit. We do not stack two lugs under a main and call it a feeder.
A cloth-insulated branch we will treat carefully
A cloth-insulated branch in a mid-1970s can has to land on a listed breaker with a listed method. We inspect the insulation at the landing. We do not nick that cloth back to bare copper and hope it holds.
A subfeed in the back of the old can
A subfeed in the back of the old can may serve a garage or a second unit. We identify it before we pull the can and we land it honestly in the new panel. A lost subfeed is not a finished replacement.
A door that will not close on a packed interior
A door that will not close on a packed interior is a fill problem. We use a can that can take the fill, or we move circuits as a planned scope. A door held shut with tape is not a finished panel.
A painted can that hides the listing
A painted can can hide the listing and the warnings. We photograph what we can read before we pull it, and we do not guess at a listing that paint has covered.
A plugged knockout that falls into the can
A plugged knockout that falls into the can can land on a bus. We recover it before we close the can. A loose knockout in the bottom of a new panel is not a finished replacement.
A 240-volt range land that was on a fuse pair with no pull-out
A 240-volt range land that was on a fuse pair with no pull-out needs a listed two-pole breaker in the new can. We land it that way. Two un-tied single-pole breakers are not a finished range land.
A closet shelf that was built over the old can
A closet shelf built over the old can can block the new working space. We have the shelf moved or we pick a listed location that is clear. A shelf over the new deadfront is not a finished closet.
A borrowed neutral we will not carry into the new can
A borrowed neutral in the old can has to be corrected in the new panel. We do not move a borrowed neutral over and call the can modern. A borrowed neutral in a new panel is not a finished landing.
A range pull-out we will retire with the can
A range pull-out in the old can is retired with that can. The range land moves to a listed two-pole breaker in the new panel. A leftover pull-out in a drawer is not a finished kitchen circuit.
A cooker circuit that used two fuse blocks as a pair
A cooker circuit that used two fuse blocks as a pair has to land on a listed two-pole breaker. We identify that pair before we pull the can. Two un-tied breakers are not a finished cooker land.
A dryer fuse pair we will map before the can comes down
A dryer fuse pair has to be mapped before the can comes down so it lands on a listed two-pole breaker. We do not guess which fuse was the dryer after the can is off the wall.
Common questions
Can you replace a fuse box with a breaker panel in a mid-1970s house? A: Yes, when we can land a listed panel, land the branches honestly and confirm the service can carry it. If the service has to change, we say so first.
Is this the same as replacing a main breaker? A: No. A main-breaker swap in an already-listed panel has its own page. This page is the replacement of a fuse can.
Will you replace a fuse can in a rented two-family unit? A: Yes, once the owner or office approves. We leave the directory and a visit note for that file.
We roll out from Seminole Blvd and reach South Highpoint in a short drive (about 7 miles). Common stops include Roosevelt Boulevard, 49th Street North, Ulmerton Road and 34th Street North. Nearby towns we serve include Largo, St. Petersburg, Clearwater, Feather Sound and Pinellas Park.
Up: Fuse Box Replacement across Tampa Bay · For everything we do locally, see South Highpoint electrical service.
Cities next door: Bay Pines · Seminole
Call or text (727) 476-7079 for fuse box replacement in South Highpoint, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
