Need commercial panel replacement in South Highpoint? A worn shop panelboard, a planned outage and a new directory you can actually use is commercial panel replacement in South Highpoint with Keywest Lights & Electric. Our Seminole Blvd shop is a short drive of about 7 miles. The company is licensed and woman-owned.
Request commercial panel replacement in South Highpoint
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
While we are in South Highpoint we can quote business electrical work, a commercial generator hookup, EV charger installation, backup generator hookups, a generator interlock, JellyFish eave lighting, panel upgrade or replacement, permanent eave lighting and a 240-volt outlet.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Commercial panel replacement in South Highpoint is a new panelboard, not a single-breaker repair
This ticket is the can: a listed panelboard in place of a worn, damaged or undersized shop or suite cabinet, a planned outage and a directory that matches the branches. A service upgrade, a house-panel swap and a main-breaker-only change sit on other pages. We stay on the panelboard.
A planned outage the shop can actually live with
We plan the outage with you, not around a surprise lunch break. If a cooler, a server or a shop tool cannot go dark, we say what can be sequenced and what cannot. A “quick swap” that takes down the whole suite with no plan is not how we work.
Branches that have to land honestly in the new can
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
Every branch that leaves the old can has to land in the new one with a listed method and a label. We will not leave a pile of unnamed conductors and promise to “sort it next week.”
A small electrical room or a plywood backboard in a suite
Many shops here have a tight room or a board on a warehouse wall, not a large electrical closet. We still need working space and a listed mount. A new can jammed into a mop closet with no clear is not a swap we will sign.
A tenant cabinet and a building room we do not own
If the panel sits in a shared room, the building or the owner has to grant access and approve the outage. We will not open a house cabinet we were not hired to touch, and we will not work a locked room we cannot enter honestly.
A mixed house-and-shop service we will not disguise
If the “shop panel” is actually a house can feeding a bay, we say so. A commercial panelboard replacement is not a way to hide a residential service change. The right ticket stays the right ticket.
Panelboard work we will not treat as a simple swap
We will not hang a larger empty can on a feeder that cannot carry it and call the shop upgraded. We will not skip a directory. We will not write a made-up review, invent a price, or describe a mid-rise switchgear room this corridor does not have.
A directory and a swap note after the outage
You get a directory you can read and a note of the can type, the outage window and the branches we landed. Keep it in the shop file. A Largo envelope does not move the suite out of unincorporated Pinellas.
Forms on a commercial can change
A panelboard replacement usually means paperwork, and it usually needs a look. We submit the forms, and we are present for the scheduled inspection. This is not a silent breaker swap inside the old can.
Coverage on the new panelboard work
The panelboard, the breakers we install and the landings we make carry two years of workmanship. Enroll in the Member Care Plan at /member-care-plans/ and the period is five years. Gear we did not install, and a later add by another contractor, are outside that period.
A feeder that is too small for the new can
The new can has to match the feeder and the load. We will not put a 200-amp face on a feeder that cannot carry it. If the feeder has to change, we stop and we explain that step.
Aluminum landings we will treat as aluminum
Older shop feeders and branches may be aluminum. Those landings get listed lugs, the proper compound and a torque we measure. Closing faster is not a reason to treat the metal as copper.
A generator interlock or a listed hold-down that has to stay listed
If the shop already has a listed interlock or a hold-down, the new can has to accept a listed successor. We will not leave an unlisted homemade kit on a new panelboard.
After-hours swaps along 49th Street North
If the only honest outage is at night, we still leave the can closed and the suite safe when we stop. We will not leave an open, unlanded board until the morning crew arrives.
A rusted enclosure in a damp warehouse corner
If the old can rusted because the wall weeps or a roof leaks, a new can in the same splash is a short-term fix. We will call out the wet wall, and we will not pretend a new enclosure solves a leak.
Working space after the shop puts storage back
The clear in front of the can has to remain after the outage. We will point to that space. A pallet of parts parked against a new deadfront is not a finished swap.
A meter section we will not invent as part of this can
If the service equipment is a different section, that work is a different ticket. We replace the panelboard we were hired to replace, and we say when the meter or the service has to change too.
A fire-alarm or a security takedown we will not surprise
If the can also feeds an alarm path, we plan that outage with you. We will not drop an alarm and find out later. If that path needs another trade, we say so before the swap.
A nameplate or a faded shop directory we photograph first
We photograph the old can, the labels and the landings before anything comes out. A faded directory is not an excuse to guess later. The photos go in the swap note.
A 480-volt leftover can in a small 208-volt suite
The new can has to match the actual system. We will not hang a leftover 480-volt board on a 208-volt feeder, or the other way around, just because the empty can was on the truck.
A floor drain that splashes the only wall for the new can
If a floor drain or a mop sink splashes the old location, we look for a drier listed wall. A new can in the same splash is a short-term swap.
A bus duct or a wireway we will only use if it is listed
A wireway or a leftover bus must be listed for the new landings. We will not stuff new feeders into a bent, unlisted trough and close the cover.
A lunch-rush outage we will not pretend is enough time
If the only window you can give is too short for an honest swap, we say so and we pick a real window. A rushed outage that leaves half the branches in the air is not a plan.
A lock kit or a hasp the insurance file already asked for
If the shop wants a lockable can, we use a listed kit. A homemade hasp drilled through a new deadfront is not a method we will leave.
A spare conduit we will label, not leave as a mystery
Empty conduits into the new can get a label. A mystery pipe with no note is how the next visit wastes an hour. We mark what we find and what we add.
Common questions
Can you replace a worn shop or suite panelboard in South Highpoint? Yes, when we can land a listed can, land the branches honestly and plan an outage the shop can live with. If the feeder cannot carry the new can, we explain that first.
Is this the same as commercial electrical repair? No. A repair of a failed branch or device has its own page. This page is the panelboard replacement itself.
Do you need the building or the owner to approve the outage? Often yes, especially in a shared room or a multi-tenant suite. We get that approval before the outage, not during it.
From the Seminole Blvd shop, South Highpoint is about 7 miles away. We know the streets around Roosevelt Boulevard, 49th Street North, 34th Street North and Ulmerton Road and also take work in Clearwater, St. Petersburg, Pinellas Park, Feather Sound and Largo.
Up: Commercial Panel Replacement across Tampa Bay · For everything we do locally, see South Highpoint electrical service.
Cities next door: Bay Pines · Seminole
Call or text (727) 476-7079 for commercial panel replacement in South Highpoint, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
