Every year, a lot of Seminole homeowners decide they want their house lit for the holidays right around the time everyone else does. That’s usually mid-November or later, when calendars are already filling up. If you’d like permanent roofline lights working before your first holiday gathering, the simplest thing you can do is start the process now.
Request a quote
Tell us what you need and where you are. A licensed electrician will call or text you back to set a time. For an emergency, call (727) 476-7079, 24/7.
This guide walks through what booking looks like with Keywest Lights & Electric, what we check at the free estimate, and what actually happens on install day, so you know what to expect from the first call to the first time you change the colors from your phone.
Why booking early makes a difference
Permanent lighting is a real installation, not a weekend string-light project. Each home gets measured, the run of lights is planned around the roofline, and the power and controller location are worked out ahead of time. That planning happens before install day, and it takes a little time to line up.
Booking earlier helps in a few practical ways:
- More scheduling choices. You’re more likely to get a day that works around your own plans, guests and travel.
- Time to decide on the details. You can think through which sides of the house to light, whether to include a garage peak or back patio, and where you want the controller.
- Lights ready when you want them. Once the system is in, your holiday scenes are ready whenever you are, whether that’s Thanksgiving weekend or the first week of December.
And because the system stays up all year, nothing is wasted by getting it done early. The same lights handle Halloween, game days, Fourth of July, birthdays and a simple warm white for everyday curb appeal.
Step 1: A quick call or online request
It starts with a phone call to (727) 476-7079 or a free estimate request on keywestlights.com. We’ll ask a few simple questions:
- Your address in Seminole or nearby (Largo, Clearwater, St. Pete, Pinellas Park, Dunedin or the beaches)
- Whether the home is one story or two
- Which parts of the roofline you’re thinking about lighting
- Whether you’d like the lights ready for a particular date
Photos of the front of the house are helpful but not required.
Step 2: The free estimate visit
At the estimate, we look at the house the way an electrician and an installer both would.
The roofline itself. We look at the fascia, soffit and gutter lines to plan where the track and fixtures will run. On many Pinellas homes the lights sit along the soffit or tucked up near the gutter line, so they blend in during the day. You can see that on the job photos on this page: in daylight, the fixtures are small dots along the eave that most people walking by won’t notice.
Power and the controller. Permanent lighting needs a reliable power source and a protected, sensible place for the controller and power supplies. We’ll talk through where that should go, often near an existing outlet or close to where power is easy to reach. If a new outlet or circuit is the better answer, we’ll explain why and include it. Outdoor outlets should have GFCI protection, and we check that as part of the visit.
Your Florida conditions. Homes near the water in Seminole, Madeira Beach, Treasure Island and St. Pete Beach deal with salt air, strong sun and summer storms. We’ll point out anything on the roofline or exterior wiring that should be addressed before installing.
Permits. Whether a permit applies depends on the scope of the electrical work and the jurisdiction. If one is required, we handle it.
You’ll get a written estimate for your specific home. There’s no pressure to decide that day.
Step 3: Picking your install date
Once you approve the estimate, we put you on the schedule. This is where booking early pays off. A few things to keep in mind:
- Weather. Rain or high wind can move an outdoor install day. If that happens, we’ll reach out to reschedule.
- Access. We’ll need access around the house, including side yards, and to the spot where the controller is going.
- You don’t have to be home all day. We’ll let you know when we need you there, usually at the start and at the end to walk through the system.
Step 4: What happens on install day
Install day is straightforward, and most of it happens along the roofline.
- Walk-through. The crew confirms the plan with you: which runs get lights, where the controller goes, and where power comes from.
- Track and lights. The track is installed along the planned roofline and the light fixtures are set in at even spacing. Corners and peaks are handled so the line looks clean from the street.
- Wiring and controller. Wiring is routed neatly, typically through or along the soffit, back to the controller and power supplies. The controller is mounted in the agreed spot, often on an exterior wall near existing power.
- Power and testing. The system is powered up and every run is tested so the colors and patterns respond the way they should.
- App setup. We help you connect the system to the app on your phone and show you how to pick colors, choose a pattern and set schedules.
- Final walk-through. We go over the finished install with you, day or evening, and answer questions.
When the crew leaves, you’re ready for the holidays and everything else on the calendar.
Step 5: Using your lights all year
This is the part most Seminole homeowners end up enjoying the most. With the app you can:
- Set Christmas colors and patterns for December
- Switch to orange and purple for Halloween
- Show team colors on game day
- Use bright white for extra light around the driveway and entry
- Set a soft warm white on a schedule for everyday curb appeal
You can set schedules once and let them run, so the lights come on at dusk and turn off when you choose.
Warranty and peace of mind
Keywest Lights & Electric is an official JellyFish Lighting dealer. JellyFish backs its product with a 5-year warranty on roofline lights, controllers and power supplies. That product warranty is separate from our workmanship warranty.
On every job, Keywest Lights & Electric provides a 2-year workmanship warranty. Member Care Plan members get a 5-year workmanship warranty and 7% off labor and materials.
Financing is available through Acorn Finance, subject to credit approval. You can check your options without affecting your credit score.
Why homeowners in Seminole call us
We’re a licensed and insured, woman-owned electrical contractor based in Seminole, and we work across Pinellas County: Seminole, Largo, Clearwater, St. Pete, Pinellas Park, Dunedin, and the beach communities. Because we’re electricians first, the power side of your permanent lighting system gets the same attention as the lights.
Ready to get on the schedule?
If you’d like your home lit before the holidays, now is a good time to start. Call (727) 476-7079 or request a free estimate on our Seminole JellyFish Lighting page.
We’ll walk your roofline, plan the power and controller, and give you a clear estimate, so your lights are ready for Christmas and every other night of the year.
About the author: Mark Einstein, Florida licensed electrical contractor, Keywest Lights & Electric.