Adding a sign to your Bay Pines storefront? Keywest Lights & Electric provides storefront sign electrical in Bay Pines for shops, restaurants, clinics and offices. We are licensed and woman-owned, and we bring power to channel letters, cabinet signs, neon, LED boards and window lights, then set timers and photocells.
Request storefront sign electrical in Bay Pines
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
Around Bay Pines we also put in a commercial electrician, backup power for a business, a car charger circuit and a standby generator. Related: jellyfish lighting and panel upgrade replacement. If you are close by, see storefront sign electrical in Seminole.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Storefront sign electrical in Bay Pines: power that makes your sign shine
A good sign works day and night. We handle the electrical side: a dedicated circuit, a disconnect, a secondary or transformer, timers and tidy wiring. Your sign company handles the sign itself, and we make sure power meets it where it should.
What we handle
- Dedicated sign circuits: breakers and wire sized to the sign.
- Disconnects: a switch within sight of the sign.
- Transformers and drivers: for neon and LED.
- Timers and photocells: automatic on and off.
- Window lighting: LED strips and accent lights.
- Pole signs and monuments: buried feeders and bases.
- Repairs: flickering, dark or buzzing signs.
Planning with your sign company
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
We review the sign drawing, the power data and the mounting plan. We locate the junction box, run conduit and have power ready before the sign arrives.
Circuits and disconnects
Signs need their own circuit, and many need a disconnect that a technician can see. We install the box at the right height and label it.
Transformers, drivers and ballasts
A neon sign uses a high-voltage transformer. An LED sign uses a power supply. We locate each part where it stays dry and cool, and wire to the maker’s diagram.
Timers, photocells and schedules
A photocell turns the sign on at dusk and off at dawn. A timer sets hours. We wire both, set the schedule and label the controls.
Weather and salt air
A coastal sign faces wind and spray. We use sealed fittings, stainless hardware and drip loops, and we keep wire inside conduit.
Pole signs and monuments
A freestanding sign needs a trench, conduit and a pull box. We mark underground lines, route around roots and restore the surface.
Repairs and troubleshooting
A flickering letter, a buzzing transformer or a dark panel may point to a bad driver, a loose connection or water. We test, repair and seal.
Window lighting and displays
Window strips and spot lights draw attention. We install dimmable LEDs on timers and wire them to a tidy control.
Landlord and association rules
Many centers require approvals for new signs. We provide wiring plans and insurance certificates to the manager.
Permits and inspection
Sign work often needs an electrical permit and an inspection. We prepare the filing and meet the inspector.
Neon, LED and illuminated letters
Neon uses high voltage and needs proper cables and cups. LED modules run on low voltage from a driver. We match the wire type and connector to each, and we never splice outside a box.
Raceways and wall penetrations
Channel letters mount on a raceway or directly on the wall. We drill through the wall at the correct spot, seal around the cable and keep water out of the building.
Grounding and bonding the sign
A metal sign cabinet must be bonded to the electrical ground. We install a bonding conductor, check continuity and record the reading for the inspector.
Lift access and working at height
Large signs need a lift or ladder. We bring the right equipment, set up barriers on the sidewalk and keep the entrance open for customers.
Lighting the entry and the awning
Warm entry lights and awning spots help customers see the door. We add a shielded fixture, a timer and an outlet for seasonal decor.
Reading the sign manual
Every sign has an installation sheet with the secondary current, cable length and transformer rating. We follow it exactly, and we leave a copy with the owner.
Seasonal banners and string lights
Holiday displays, open flags and patio lights all draw power. We add a few labeled outlets near the front, on a timer if you like.
Menu boards and digital screens
Digital menus need a steady source, a network cable and cooling space behind them. We install a recessed box and keep the wall tidy.
Parking lot and sidewalk lighting
Evening customers need a safe walk. We add shielded fixtures aimed at the pavement, avoid glare toward neighbors and set photocells.
Surge protection for signs
LED drivers are sensitive. We add a protector at the sign circuit so storms and switching surges are less likely to destroy them.
Old neon and tube lighting
Some owners keep vintage neon. We test cables, replace cracked boots and install a new transformer with the matching rating.
Records for your landlord
We leave a simple sheet with the circuit number, the breaker, the transformer rating and the timer settings.
Awnings, canopies and blade signs
Hanging blade signs sway in wind, which can chafe cable. We use strain relief, flexible whip sections and gasketed connectors. Awning lights get low-voltage strips with weather-rated drivers hidden above the fabric.
Brick, stucco and block walls
Masonry needs special anchors and careful drilling. We pick the bit for the material, avoid cracking face brick and route cable through mortar joints when we can.
Shopping center rules and shared meters
Tenants in a plaza may share a meter or a house panel. We trace the circuit, label it for your suite and confirm that the landlord’s panel has room before we land the new breaker.
Daylight savings and timers
Digital timers drift after a long outage. We choose models with a battery backup and show staff how to reset the clock.
Warranty
We stand behind our workmanship for 2 years, or 5 years with a Member Care Plan.
Before we arrive
Share the sign drawing, the mounting location and your landlord’s rules. A photo of the wall helps.
Common questions
Do signs need a dedicated circuit? Usually yes. We size it to the sign.
Can you set up a timer? Yes. We wire timers and photocells and set the schedule.
Can you fix a flickering sign? Yes. We test the driver, the connections and the controls.
Our trucks leave the shop on Seminole Blvd, about a mile away, and work near Seminole Boulevard, Long Bayou, Boca Ciega Bay and Bay Pines Boulevard. We also serve Madeira Beach, Indian Shores, North Redington Beach, Bardmoor and Pinellas Park.
Up: Storefront Sign Electrical across Tampa Bay · For everything we do locally, see Bay Pines electrical service.
Nearby: Madeira Beach · Redington Beach · North Redington Beach · Bardmoor
Call or text (727) 476-7079 for storefront sign electrical in Bay Pines, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
