Need security light installation in South Highpoint? A motion flood at an eave corner, a carport or a side yard is security light installation in South Highpoint with Keywest Lights & Electric. We roll from the Seminole Blvd shop, about 7 miles from this inland community. We work as a licensed, woman-owned shop.
Request security light installation in South Highpoint
Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.
See our other South Highpoint pages for a commercial electrician, a commercial generator hookup, EV charger hookups, generator installation, a generator interlock, permanent Christmas lights, panel upgrade or replacement, permanent lighting along the eaves and a 240-volt outlet.
Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

Security light installation in South Highpoint is a motion flood at the wall or the eave, not holiday lighting
This page is a security or motion flood: the fixture, the listed box, the motion or photocell setting and the path to the circuit. It is not permanent Christmas lighting and not JellyFish eave lighting. Those pages cover decorative lighting on eaves, soffits and gable rakes only. Here we stay with a work light that covers a yard, a carport or a side path.
An eave corner and a box that can hold the flood
We mount a listed box at the eave corner or on the exterior wall, not on a ridge or a peak. We check the structure under the soffit. A heavy flood needs a listed box, not a staple through a thin soffit panel. We do not hang a flood from a drip edge.
Motion settings and a neighbor’s window
- Florida electrical contractor license EC13014717, licensed & insured
- Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
- 2-year workmanship warranty, 5 years with a Member Care Plan
- SPAN Authorized Installer and Home Depot preferred contractor
- Open 24/7 for electrical emergencies: call or text (727) 476-7079
A motion flood that aims across a property line can light a neighbor’s window all night. We aim the head at the yard or the carport you want lit. We set the sensitivity so a passing car on a side street does not keep it in a constant cycle. We do not leave a flood aimed at a bedroom across the lot.
Photocells and a flood that never sleeps
A failed photocell can leave a flood on in daylight or dark at night. We test the cell. We replace a failed cell or we use a fixture with a listed cell we can aim away from other lights. We do not tape over a cell and call the dusk-to-dawn feature finished.
Manufactured eaves and a thin soffit
A manufactured home can have a thin soffit and a short eave. We pick a listed mount that that structure can hold. We will not over-promise a heavy two-head flood on a light soffit panel. A wall mount on a solid block or a framed wall may be the better path, and we will say so.
Duplex side yards and a light that stays on your side
In a two-family building, a side-yard flood may sit near a shared walk. We need the owner or the office to approve the mount. We aim the light at the side that hired us. We do not add a head that floods the other unit’s window.
A carport and a damp-location listing
A carport flood needs a damp- or wet-location listing, not an indoor shop light moved outside. We read the listing. We land the conductors in a listed, gasketed box. We do not leave an indoor fixture under a carport roof and hope the roof keeps it dry.
What this page will not install
We do not install decorative permanent lighting on this ticket. We do not run dock or seawall lighting; this community has almost no water, and that work is not what we invent here. We do not claim airport or street-light contracts. We do not invent a review or a price.
A close-out note with the aim and the setting
We leave an aim card when we finish. It records the mount location, the aim we left and the motion or photocell setting. A later occupant can use that card if they want the same aim.
Forms when a new outdoor path goes in
Swapping a flood on an existing listed outdoor box can be a brief stop. A new cable, a new box or a cut in a wall usually means paperwork. Paperwork, when the job needs it, is our responsibility, and we remain on site for a scheduled inspection. If the envelope reads Largo, the parcel is still under unincorporated Pinellas rules.
How a security light is covered
Workmanship on the fixture, the box and the path we install carries two years of coverage. The Member Care Plan at /member-care-plans/ makes that workmanship term five years instead of two. A lamp or a motion module the listing treats as a replaceable part follows that listing. Anything we did not open stays outside coverage.
A corner near Ulmerton glare
Some lots near Ulmerton Road already have a lot of street glare. We aim the flood at the yard, not into that glare, so the motion sensor can still see a person in the dark. We do not point the head at the road and hope the sensor still works.
Two heads and a load we will confirm
A two-head flood can exceed an old switch or a tired 1970s circuit that already carries a porch and a garage opener. We check the load. We land a listed device on a circuit that can take it, or we say a dedicated path is the better ticket.
A rusted old quartz flood still on a tired arm
Some houses still have a rusted quartz flood on a tired arm. We take that fixture down, we inspect the box and we land a listed LED flood if the box is sound. We do not leave a rusted arm hanging next to the new head.
A side-gate latch that needs a narrow beam
A side gate sometimes needs a narrow beam on the latch, not a wide flood across the yard. We pick a head and an aim that lights the latch. We do not blast the whole side lot when a narrow beam would do.
A timer that fights the photocell
Some 1970s houses still have a porch timer that fights a new photocell. We pick one control method and we land it honestly. We do not leave a timer and a photocell fighting each other all night.
A palm frond that keeps the motion cycling
A palm frond that moves in the afternoon wind can keep a motion flood cycling. We aim the head below the frond or we set the sensitivity so the frond is not the trigger. We do not leave a flood that fires every time the wind moves a frond.
A carport post versus a wall mount
A light on a carport post is a different mount than a wall flood. If the post is sound and listed hardware can land there, we can use it. If the post is rusted through, we say so and we pick a wall or an eave mount instead.
Headlamps along 49th Street North
Lots near 49th Street North get passing headlamps at night. We aim the sensor at the yard, not at the street, so those headlamps do not keep the flood in a cycle. We do not point the sensor at the travel lane.
A tool shed at the back of a short lot
A small tool shed at the back of a short lot may need its own head, not just spill from the house flood. We can mount a listed flood on the shed if the wall can hold the box and a listed path can reach it. We do not pretend a house-corner flood will light a shed that sits in its own shadow.
A dusk-to-dawn head next to a motion head
Some owners want one dusk-to-dawn head and one motion head on the same corner. We only do that when both fixtures and the circuit can share the box honestly. We do not stack two heavy heads on a box listed for one.
Skirting on a manufactured home and a low wall mount
Skirting on a manufactured home can hide a low wall mount or bounce light under the home. We keep the mount above the skirting and we aim the head at the yard, not under the home. We do not punch a flood through the skirting.
A carport roof with no fascia for a box
Some carports here have a thin metal roof and no fascia board for a box. We pick a listed wall mount on the house side of the carport, or we say the roof itself cannot hold the flood. We do not screw a heavy flood through thin metal roofing and call the mount finished.
A photocell aimed at a porch lamp
A photocell that sees a porch lamp will shut the flood off as soon as the porch lamp comes on, or it will hunt. We aim the cell at the open sky, away from the porch lamp. We do not leave a cell staring at another fixture.
Common questions
Can you install a motion flood on a manufactured home? A: Yes, when the wall or the eave can hold a listed box. We check the structure first and we will not hang a heavy two-head flood on a thin soffit panel.
Is this the same as permanent eave lighting? A: No. Permanent and JellyFish lighting have their own pages and stay on eaves, soffits and gable rakes. This page is a security or motion flood for a yard, a carport or a side path.
Will a flood shine into my neighbor’s window? A: We aim the head at the area you want lit and we set the motion so a side-street car does not keep it cycling. We will not leave a flood aimed at a neighboring bedroom.
We roll out from Seminole Blvd and reach South Highpoint in a short drive (about 7 miles). Common stops include Roosevelt Boulevard, 49th Street North, Ulmerton Road and 34th Street North. Nearby towns we serve include Largo, Clearwater, Feather Sound, St. Petersburg and Pinellas Park.
Up: Security Light Installation across Tampa Bay · For everything we do locally, see South Highpoint electrical service.
Cities next door: Bay Pines · Seminole
Call or text (727) 476-7079 for security light installation in South Highpoint, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.
