Commercial LED Lighting Retrofit in South Highpoint, FL

Need commercial LED lighting retrofit in South Highpoint? Our licensed, woman-owned crew retrofits shop and suite lighting to LED in South Highpoint, including the fixtures, the controls and a labeled closeout. The shop on Seminole Blvd is about 7 miles from this community.

Request commercial LED lighting retrofit in South Highpoint

Tell us what you need and where the work is. A licensed electrician will reply with next steps and a time to visit.

This field is required.
This field is required.
This field is required.
This field is required.
How did you hear about us?
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.
This field is required.

Work we already do in South Highpoint includes backup generator hookups, home battery backup, JellyFish eave lighting and emergency electrical calls. In South Highpoint we also handle commercial generator installation, ev charger installation, generator interlock transfer switch, panel upgrade replacement and permanent lighting. In South Highpoint we also handle commercial electrician.

Call or text (727) 476-7079 · open 24/7 for emergencies · request a quote online

An electrician installing an LED fixture in an office ceiling
An electrician installing an LED fixture in an office ceiling.

Commercial LED lighting retrofit in South Highpoint is a planned swap of the lighting system, not a box of bulbs left on a counter

A retrofit replaces tired fluorescent, older shop lights or mismatched fixtures with listed LED fixtures or kits and the controls that belong with them. We walk the sales floor, the warehouse bay and the back office, we count the fixtures and we write a layout that keeps the space even, not patchy. In the modest bays off Ulmerton Road that often means a small sales room, a work aisle and a stock corner, not a huge distribution floor.

Why these rooms still have mixed lighting

Many of these suites were finished in the same mid-1970s window as the nearby houses, then relamped a few times. A later tenant may have added a shop light on a leftover circuit. The result is a room that is bright in one aisle and dim at the counter. A retrofit is the chance to put the whole room on a consistent, listed set of fixtures and a control people will actually use.

What the retrofit usually includes

  • Florida electrical contractor license EC13014717, licensed & insured
  • Woman-owned business based at 6248 Seminole Blvd, Seminole FL 33772
  • 2-year workmanship warranty, 5 years with a Member Care Plan
  • SPAN Authorized Installer and Home Depot preferred contractor
  • Open 24/7 for electrical emergencies: call or text (727) 476-7079
  • A fixture count and a layout: rooms, mounting heights and the type of fixture for each area.
  • Listed LED fixtures or kits: a match for the existing grid, the surface or the chain hang.
  • Controls: occupancy, a simple switch or a listed dimmer that matches the new fixtures.
  • Drivers and emergency lighting: packs and heads that still work after the swap.
  • Cleanup and a closeout: old lamps and ballasts leave the site, and the panel directory is updated.

Ballasts, grids and a ceiling that has to stay in business

Some rooms can take a kit in the existing housing; others need a new fixture. We will not force a kit into a housing that is rusty, cracked or not listed for it. If a grid is damaged, we tell you before we start a row. Work can be phased so a sales floor is not dark during business hours.

How a retrofit day is run

We confirm the layout, lock out the lighting circuits, swap a room or a row, test and move on. Lenses are cleaned or replaced as the quote says. Old lamps and ballasts go out in our truck. If a night window is better for the business, we book that. The drive from Seminole Blvd is short enough to support an early or late start.

Shop bays, offices and a front room

A shop aisle may need a tougher, higher fixture than a front office. We do not put the same decorative fixture in a dusty work bay, and we do not leave a bare shop lamp over a reception desk unless you asked for that look. Each room gets the fixture type that fits how it is used.

Reviews and paperwork

A same-circuit fixture swap can stay a service visit. A new lighting layout, a new branch or a change to emergency heads usually needs a review. We file the forms when they apply and meet the inspector. The parcel decides who reviews the work.

Coverage after the room is relit

Fixtures we furnish, the labor and the controls we install are under a two-year workmanship term, or five years with the Member Care Plan at /member-care-plans/. If you bought the fixtures, our term covers the hang, not a factory defect in the light.

Nearby suites

The same kind of lighting retrofit is available in Pinellas Park, Largo and Feather Sound. Send a few photos of the ceiling and a rough fixture count to start a quote.

What we will not do

We will not leave a mixed row of old and new lamps and call the room finished unless you asked for a phased job. We will not reuse a damaged housing. We will not put a lamp dimmer on a fixture that is not listed for it. If the existing circuit is already at its limit, we quote the extra branch before we add more load.

Prismatic lenses, tombstone sockets and vapor-tight housings

A yellowed prismatic lens, a cracked tombstone socket or a rusty vapor-tight housing is not worth a new lamp. We replace those housings, we use gaskets that close on a dusty or damp bay, and we keep a chain-hung high bay over a work aisle instead of forcing a weak grid fixture into a shop. The front office can take a cleaner troffer; the work bay should not.

Night-light circuits and a photocell on a lot light

A small night-light circuit in a corridor and a photocell on a lot light keep the building from going completely dark after hours. We keep those circuits separate from the main room lighting so a sensor in the sales floor does not kill the parking light. If an emergency head is dead, that is on the punch list before we call the retrofit finished.

Color temperature, a sales-floor grid and a stock-room chain hang

A sales floor often wants a cleaner, more even color than a stock room. We keep one color temperature in the public rooms so a shirt or a painted wall does not change shade from aisle to aisle, and we use a tougher chain-hung fixture over racks and lifts. If you already bought fixtures of mixed color, we will say so before they go in the ceiling.

Exit signs, a test button and a dark corridor

An exit sign with a dead battery and a dark corridor at close of business is part of the retrofit punch list. We test the button, we replace a failed pack and we do not leave a stair or a rear hall without a working head. Those devices stay on their own circuit so a lighting sensor in the front room does not kill them.

A skylight bay, a faded acrylic and a yellowed wrap

A 1970s shop with a skylight bay can have a faded acrylic and a yellowed wrap that make the new lamp look worse than it is. We swap the lens or the wrap when it is that far gone so the new source has a clean face, and we do not leave a milky panel hanging over a sales counter.

Common questions

Can you retrofit one room first? A: Yes. Many owners start with the front room or the shop aisle and phase the rest.

Do you take away the old lamps and ballasts? A: Yes, unless you want to keep a fixture. We haul what we remove.

Will the business have to close? A: Not always. We can work a night or early-morning window, or phase the rooms.

Can you add occupancy sensors? A: Yes, when the fixtures and the layout support a listed control. That item is on the quote.

Does a retrofit need a review? A: A same-circuit fixture swap may not. A new layout or a new circuit usually does, and we will tell you first.

What should I send for a quote? A: Photos of the ceilings, a rough count of the fixtures and the hours the space is used.

How do I book the walk? A: Call or text (727) 476-7079, or use the form at the top of this page.

The South Highpoint job site is about 7 miles from our Seminole Blvd shop. You will see us along 34th Street North, Ulmerton Road, Roosevelt Boulevard and 49th Street North. We also cover St. Petersburg, Feather Sound, Pinellas Park, Clearwater and Largo.

Up: Commercial LED Lighting Retrofit across Tampa Bay · For everything we do locally, see South Highpoint electrical service.

Cities next door: Seminole · Bear Creek · Indian Shores · Tierra Verde · Bay Pines

Call or text (727) 476-7079 for commercial LED lighting retrofit in South Highpoint, or book online. Business hours 7 AM–5 PM, weekend service, 24/7 emergency calls.